--3MwIy2ne0vdjdPXF
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Hi,

I finally made an output of the netbsd 1.5.2 laptop install disks
on what they report on my compaq armada E500.
I'll attach it below.
Still same problems, the network card which is seen (ex0)
is causing timeouts as soon as you try anything with it.
Like trying to fetch the distribution file by ftp or something
like it. Usb, soundcard and the network card are in irq 11.
So i cant install netbsd on this laptop :-(
Any hints what i could do to remedy this?
And ... this laptop has a 600mhz processor, netbsd reports only 497 mhz ..??
Bye,

Mipam.

--3MwIy2ne0vdjdPXF
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=netbsd_help

NetBSD 1.5.2 (INSTALL_LAPTOP) #3: Sat Aug 18 23:58:32 CEST 2001
    he@hamster.urc.uninett.no:/usr/src/sys/arch/i386/compile/INSTALL_LAPTOP
cpu0: Intel Pentium III (Coppermine) (686-class), 497.48 MHz
total memory = 127 MB
avail memory = 114 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xf0000
PCI BIOS rev. 2.1 found at 0xf0478
PCI IRQ Routing Table rev. 1.0 found at 0xf0970, size 0 bytes (-2 entries)
pcibios_pir_init: bad IRQ table size
PCI IRQ Routing Table rev. 1.0 found at 0xf9c70, size 224 bytes (12 entries)
PCI Interrupt Router at 000:07:0 (vendor 0x8086 product 0x7110)
PCI Exclusive IRQs: 11
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7190 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7191 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vendor 0x1002 product 0x4c4d (VGA display, revision 0x64) at pci1 dev 0 function 0 not configured
cbb0 at pci0 dev 4 function 0: vendor 0x104c product 0xac1c (rev. 0x01)
cbb1 at pci0 dev 4 function 1: vendor 0x104c product 0xac1c (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 1: <Compaq  CRN-8241B, 1999/11/13, 2.23> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6015MAP>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 5729 MB, 12416 cyl, 15 head, 63 sec, 512 bytes/sect x 11733120 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x03) at pci0 dev 7 function 3 not configured
vendor 0x125d product 0x1978 (audio multimedia, revision 0x10) at pci0 dev 8 function 0 not configured
vendor 0x11c1 product 0x0449 (miscellaneous communications, revision 0x01) at pci0 dev 9 function 0 not configured
cbb0: interrupting at irq 11
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x824208 lscp 0x20020200
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cbb1: cacheline 0x8 lattimer 0x20
cbb1: bhlc 0x824208 lscp 0x20030300
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ffed netmask ffed ttymask ffef
md0: internal 2048K image area
ex0 at cardbus0 dev 0 function 0: 3Com 3c575CT Ethernet
ex0: interrupting at 11
ex0: MAC address 00:04:75:77:f1:0e
tqphy0 at ex0 phy 0: 78Q2120 10/100 media interface, rev. 11
tqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wd0: no disk label
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs

--3MwIy2ne0vdjdPXF--