Subject: Re: Pb with my "Network interfaces" or with my "adsl connection"
To: Juergen Hannken-Illjes <hannken@eis.cs.tu-bs.de>
From: Xc0r <xc0r@ifrance.com>
List: netbsd-help
Date: 06/02/2001 00:08:14
C'est un message de format MIME en plusieurs parties.
------=_NextPart_000_002C_01C0EAF8.1E035DE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Yep, ok, I have made the debug and i have this debug msg (rpppoe-debug.txt)
I try man pppoe but .... what should i search ? what should i change ?
Thx
Xc0r
ps : sorry but I'm newbie .... but i have to learn :)
> I'm quite sure the PPPoE discovery phase is also logged...
> >
> > > and post the debug output (usually a directory /tmp/pppoe-debug-XXX).
> > > Be sure there are no plain text passords in this output :-)
> >
> > That will probably be quite empty, as LCP didn't even start. There is no
> > PPPoE session started yet, so PPP got no input at all (if he posted all
> > output).
> >
> >
> > Martin
> >
>
>
> --
> Juergen Hannken-Illjes - hannken@eis.cs.tu-bs.de - TU Braunschweig
(Germany)
------=_NextPart_000_002C_01C0EAF8.1E035DE0
Content-Type: text/plain;
name="pppoe-debug.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="pppoe-debug.txt"
---------------------------------------------=0A=
* The following section contains information about your system=0A=
Fri Jun 1 23:25:13 GMT 2001=0A=
Output of uname -a=0A=
NetBSD 1.5 NetBSD 1.5 (GENERIC) #1: Sun Nov 19 21:42:11 MET 2000 =
fvdl@sushi:/work/trees/netbsd-1-5/sys/arch/i386/compile/GENERIC i386=0A=
---------------------------------------------=0A=
* The following section contains information about your network=0A=
* interfaces. The one you chose for PPPoE should contain the words:=0A=
* 'UP' and 'RUNNING'. If it does not, you probably have an Ethernet=0A=
* driver problem.=0A=
Output of ifconfig -a=0A=
tlp0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500=0A=
address: 00:a0:cc:60:aa:6e=0A=
media: Ethernet autoselect (10baseT)=0A=
status: active=0A=
inet6 fe80::2a0:ccff:fe60:aa6e%tlp0 prefixlen 64 scopeid 0x1=0A=
lo0: flags=3D8009<UP,LOOPBACK,MULTICAST> mtu 33228=0A=
inet 127.0.0.1 netmask 0xff000000=0A=
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2=0A=
inet6 ::1 prefixlen 128=0A=
ppp0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1500=0A=
ppp1: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1500=0A=
sl0: flags=3Dc010<POINTOPOINT,LINK2,MULTICAST> mtu 296=0A=
sl1: flags=3Dc010<POINTOPOINT,LINK2,MULTICAST> mtu 296=0A=
strip0: flags=3D0<> mtu 1100=0A=
strip1: flags=3D0<> mtu 1100=0A=
tun0: flags=3D10<POINTOPOINT> mtu 1500=0A=
tun1: flags=3D10<POINTOPOINT> mtu 1500=0A=
gre0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1450=0A=
gre1: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1450=0A=
ipip0: flags=3D8010<POINTOPOINT,MULTICAST>=0A=
ipip1: flags=3D8010<POINTOPOINT,MULTICAST>=0A=
gif0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280=0A=
gif1: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280=0A=
gif2: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280=0A=
gif3: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280=0A=
---------------------------------------------=0A=
* The following section lists your routing table.=0A=
* If you have an entry which starts with '0.0.0.0', you probably=0A=
* have defined a default route and gateway, and pppd will=0A=
* not create a default route using your ISP. Try getting=0A=
* rid of this route.=0A=
Output of netstat -n -r=0A=
Routing tables=0A=
=0A=
Internet:=0A=
Destination Gateway Flags Refs Use Mtu =
Interface=0A=
127 127.0.0.1 UGRS 0 0 33228 lo0=0A=
127.0.0.1 127.0.0.1 UH 1 0 33228 lo0=0A=
=0A=
XNS:=0A=
Destination Gateway Flags Refs Use Mtu =
Interface=0A=
=0A=
ISO:=0A=
Destination Gateway Flags Refs Use Mtu =
Interface=0A=
=0A=
X.25:=0A=
Destination Gateway Flags Refs Use Mtu =
Interface=0A=
=0A=
AppleTalk:=0A=
Destination Gateway Flags Refs Use Mtu =
Interface=0A=
=0A=
Internet6:=0A=
Destination Gateway Flags Refs =
Use Mtu Interface=0A=
::/104 ::1 UGRS 0 =
0 33228 lo0 =3D>=0A=
::/96 ::1 UGRS 0 =
0 33228 lo0=0A=
::1 ::1 UH 12 =
0 33228 lo0=0A=
::127.0.0.0/104 ::1 UGRS 0 =
0 33228 lo0=0A=
::224.0.0.0/100 ::1 UGRS 0 =
0 33228 lo0=0A=
::255.0.0.0/104 ::1 UGRS 0 =
0 33228 lo0=0A=
::ffff:0.0.0.0/96 ::1 UGRS 0 =
0 33228 lo0=0A=
2002::/24 ::1 UGRS 0 =
0 33228 lo0=0A=
2002:7f00::/24 ::1 UGRS 0 =
0 33228 lo0=0A=
2002:e000::/20 ::1 UGRS 0 =
0 33228 lo0=0A=
2002:ff00::/24 ::1 UGRS 0 =
0 33228 lo0=0A=
fe80::/10 ::1 UGRS 0 =
0 33228 lo0=0A=
fe80::%tlp0/64 link#1 UC 0 =
0 1500 tlp0=0A=
fe80::%lo0/64 fe80::1%lo0 U 0 =
0 33228 lo0=0A=
fec0::/10 ::1 UGRS 0 =
0 33228 lo0=0A=
ff01::/32 ::1 U 0 =
0 33228 lo0=0A=
ff02::%tlp0/32 link#1 UC 0 =
0 1500 tlp0=0A=
ff02::%lo0/32 fe80::1%lo0 UC 0 =
0 33228 lo0=0A=
---------------------------------------------=0A=
Contents of /etc/resolv.conf=0A=
* The following section lists DNS setup.=0A=
* If you can browse by IP address, but not name, suspect=0A=
* a DNS problem.=0A=
nameserver 193.252.19.3=0A=
nameserver 193.252.19.4=0A=
---------------------------------------------=0A=
* The following section lists /etc/ppp/options.=0A=
* You should have NOTHING in that file.=0A=
Contents of /etc/ppp/options=0A=
---------------------------------------------=0A=
* The following section identifies your Ethernet interface=0A=
* and user name. Some ISP's need 'username'; others=0A=
* need 'username@isp.com'. Try both=0A=
ETH=3Dtlp0; USER=3Dfti/pbfb92a@fti=0A=
---------------------------------------------=0A=
* The following section shows the pppd command we will invoke=0A=
pppd invocation=0A=
/usr/sbin/pppd pty '/usr/sbin/pppoe -p =
/var/run/pppoe.conf-adsl.pid.pppoe -I tlp0 -T 80 -U -m 1412 ' =
noipdefault noauth default-asyncmap defaultroute hide-password nodetach =
local mtu 1492 mru 1492 noaccomp noccp nobsdcomp nodeflate nopcomp novj =
novjccomp user fti/pbfb92a@fti lcp-echo-interval 20 lcp-echo-failure 3 =
debug=0A=
---------------------------------------------=0A=
Using interface ppp0=0A=
Connect: ppp0 <--> /dev/ttyp2=0A=
sent [LCP ConfReq id=3D0x1 <mru 1492> <magic 0xe561f7c7>]=0A=
sent [LCP ConfReq id=3D0x1 <mru 1492> <magic 0xe561f7c7>]=0A=
sent [LCP ConfReq id=3D0x1 <mru 1492> <magic 0xe561f7c7>]=0A=
sent [LCP ConfReq id=3D0x1 <mru 1492> <magic 0xe561f7c7>]=0A=
sent [LCP ConfReq id=3D0x1 <mru 1492> <magic 0xe561f7c7>]=0A=
sent [LCP ConfReq id=3D0x1 <mru 1492> <magic 0xe561f7c7>]=0A=
sent [LCP ConfReq id=3D0x1 <mru 1492> <magic 0xe561f7c7>]=0A=
sent [LCP ConfReq id=3D0x1 <mru 1492> <magic 0xe561f7c7>]=0A=
sent [LCP ConfReq id=3D0x1 <mru 1492> <magic 0xe561f7c7>]=0A=
sent [LCP ConfReq id=3D0x1 <mru 1492> <magic 0xe561f7c7>]=0A=
LCP: timeout sending Config-Requests=0A=
Connection terminated.=0A=
Waiting for 1 child processes...=0A=
script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I tlp0 =
-T 80 -U -m 1412 -D /tmp/pppoe-debug-1058/pppoe-debug.txt-0, pid 1107=0A=
pppoe: Timeout waiting for PADO packets=0A=
Waiting for 1 child processes...=0A=
script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I tlp0 =
-T 80 -U -m 1412 -D /tmp/pppoe-debug-1058/pppoe-debug.txt-0, pid 1107=0A=
Script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I tlp0 -T =
80 -U -m 1412 -D /tmp/pppoe-debug-1058/pppoe-debug.txt-0 finished =
(pid 1107), status =3D 0x100=0A=
---------------------------------------------=0A=
* The following section is an extract from your log.=0A=
* Look for error messages from pppd, such as=0A=
* a lack of kernel support for PPP, authentication failure=0A=
* etc.=0A=
Extract from /var/log/messages=0A=
Jun 1 21:44:46 pppd[220]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:44:46 pppd[220]: Using interface ppp0=0A=
Jun 1 21:44:46 pppd[220]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:44:46 pppoe[223]: Interface tlp0 is not up =0A=
Jun 1 21:44:46 pppd[220]: Modem hangup=0A=
Jun 1 21:44:46 pppd[220]: Connection terminated.=0A=
Jun 1 21:44:46 pppd[220]: Exit.=0A=
Jun 1 21:44:51 pppd[242]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:44:51 pppd[242]: Using interface ppp0=0A=
Jun 1 21:44:51 pppd[242]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:44:51 pppoe[244]: Interface tlp0 is not up =0A=
Jun 1 21:44:51 pppd[242]: Modem hangup=0A=
Jun 1 21:44:51 pppd[242]: Connection terminated.=0A=
Jun 1 21:44:51 pppd[242]: Exit.=0A=
Jun 1 21:44:56 pppd[271]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:44:56 pppd[271]: Using interface ppp0=0A=
Jun 1 21:44:56 pppd[271]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:44:56 pppoe[273]: Interface tlp0 is not up =0A=
Jun 1 21:44:56 pppd[271]: Modem hangup=0A=
Jun 1 21:44:56 pppd[271]: Connection terminated.=0A=
Jun 1 21:44:56 pppd[271]: Exit.=0A=
Jun 1 21:45:01 pppd[292]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:45:01 pppd[292]: Using interface ppp0=0A=
Jun 1 21:45:01 pppd[292]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:45:01 pppoe[294]: Interface tlp0 is not up =0A=
Jun 1 21:45:01 pppd[292]: Modem hangup=0A=
Jun 1 21:45:01 pppd[292]: Connection terminated.=0A=
Jun 1 21:45:01 pppd[292]: Exit.=0A=
Jun 1 21:45:06 pppd[321]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:45:06 pppd[321]: Using interface ppp0=0A=
Jun 1 21:45:06 pppd[321]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:45:06 pppoe[323]: Interface tlp0 is not up =0A=
Jun 1 21:45:06 pppd[321]: Modem hangup=0A=
Jun 1 21:45:06 pppd[321]: Connection terminated.=0A=
Jun 1 21:45:06 pppd[321]: Exit.=0A=
Jun 1 21:45:11 pppd[342]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:45:11 pppd[342]: Using interface ppp0=0A=
Jun 1 21:45:11 pppd[342]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:45:11 pppoe[344]: Interface tlp0 is not up =0A=
Jun 1 21:45:11 pppd[342]: Modem hangup=0A=
Jun 1 21:45:11 pppd[342]: Connection terminated.=0A=
Jun 1 21:45:11 pppd[342]: Exit.=0A=
Jun 1 21:45:16 pppd[371]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:45:16 pppd[371]: Using interface ppp0=0A=
Jun 1 21:45:16 pppd[371]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:45:16 pppoe[373]: Interface tlp0 is not up =0A=
Jun 1 21:45:16 pppd[371]: Modem hangup=0A=
Jun 1 21:45:16 pppd[371]: Connection terminated.=0A=
Jun 1 21:45:17 pppd[371]: Exit.=0A=
Jun 1 21:54:52 pppd[525]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:54:52 pppd[525]: Using interface ppp0=0A=
Jun 1 21:54:52 pppd[525]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:54:52 pppoe[527]: Interface tlp0 is not up =0A=
Jun 1 21:54:52 pppd[525]: Modem hangup=0A=
Jun 1 21:54:52 pppd[525]: Connection terminated.=0A=
Jun 1 21:54:52 pppd[525]: Exit.=0A=
Jun 1 21:54:57 pppd[546]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:54:57 pppd[546]: Using interface ppp0=0A=
Jun 1 21:54:57 pppd[546]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:54:57 pppoe[548]: Interface tlp0 is not up =0A=
Jun 1 21:54:57 pppd[546]: Modem hangup=0A=
Jun 1 21:54:57 pppd[546]: Connection terminated.=0A=
Jun 1 21:54:57 pppd[546]: Exit.=0A=
Jun 1 21:55:02 pppd[559]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:55:02 pppd[559]: Using interface ppp0=0A=
Jun 1 21:55:02 pppd[559]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:55:02 pppoe[561]: Interface tlp0 is not up =0A=
Jun 1 21:55:02 pppd[559]: Modem hangup=0A=
Jun 1 21:55:02 pppd[559]: Connection terminated.=0A=
Jun 1 21:55:02 pppd[559]: Exit.=0A=
Jun 1 21:55:07 pppd[565]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:55:07 pppd[565]: Using interface ppp0=0A=
Jun 1 21:55:07 pppd[565]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:55:07 pppoe[567]: Interface tlp0 is not up =0A=
Jun 1 21:55:07 pppd[565]: Modem hangup=0A=
Jun 1 21:55:07 pppd[565]: Connection terminated.=0A=
Jun 1 21:55:07 pppd[565]: Exit.=0A=
Jun 1 21:55:12 pppd[570]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:55:12 pppd[570]: Using interface ppp0=0A=
Jun 1 21:55:12 pppd[570]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:55:12 pppoe[572]: Interface tlp0 is not up =0A=
Jun 1 21:55:12 pppd[570]: Modem hangup=0A=
Jun 1 21:55:12 pppd[570]: Connection terminated.=0A=
Jun 1 21:55:12 pppd[570]: Exit.=0A=
Jun 1 21:55:17 pppd[575]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:55:17 pppd[575]: Using interface ppp0=0A=
Jun 1 21:55:17 pppd[575]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:55:17 pppoe[577]: Interface tlp0 is not up =0A=
Jun 1 21:55:17 pppd[575]: Modem hangup=0A=
Jun 1 21:55:17 pppd[575]: Connection terminated.=0A=
Jun 1 21:55:17 pppd[575]: Exit.=0A=
Jun 1 21:55:22 pppd[581]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:55:22 pppd[581]: Using interface ppp0=0A=
Jun 1 21:55:22 pppd[581]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:55:22 pppoe[583]: Interface tlp0 is not up =0A=
Jun 1 21:55:22 pppd[581]: Modem hangup=0A=
Jun 1 21:55:22 pppd[581]: Connection terminated.=0A=
Jun 1 21:55:22 pppd[581]: Exit.=0A=
Jun 1 21:55:27 pppd[586]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:55:27 pppd[586]: Using interface ppp0=0A=
Jun 1 21:55:27 pppd[586]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:55:27 pppoe[588]: Interface tlp0 is not up =0A=
Jun 1 21:55:27 pppd[586]: Modem hangup=0A=
Jun 1 21:55:27 pppd[586]: Connection terminated.=0A=
Jun 1 21:55:27 pppd[586]: Exit.=0A=
Jun 1 21:55:32 pppd[592]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:55:32 pppd[592]: Using interface ppp0=0A=
Jun 1 21:55:32 pppd[592]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:55:32 pppoe[594]: Interface tlp0 is not up =0A=
Jun 1 21:55:32 pppd[592]: Modem hangup=0A=
Jun 1 21:55:32 pppd[592]: Connection terminated.=0A=
Jun 1 21:55:32 pppd[592]: Exit.=0A=
Jun 1 21:56:22 pppd[617]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 21:56:22 pppd[617]: Using interface ppp0=0A=
Jun 1 21:56:22 pppd[617]: Connect: ppp0 <--> /dev/ttyp0=0A=
Jun 1 21:56:22 pppoe[619]: Interface=3Dtlp0 HWaddr=3D00:A0:CC:60:AA:6E =
Device=3D/dev/bpf0 Buffer size=3D8192=0A=
Jun 1 21:56:53 pppd[617]: LCP: timeout sending Config-Requests =0A=
Jun 1 21:56:53 pppd[617]: Connection terminated.=0A=
Jun 1 21:56:57 pppoe[619]: Timeout waiting for PADO packets=0A=
Jun 1 21:56:57 pppd[617]: Exit.=0A=
Jun 1 23:14:17 pppoe[846]: ioctl(SIOCGIFFLAGS): Device not configured=0A=
Jun 1 23:14:20 pppoe[847]: Interface=3Dtlp0 HWaddr=3D00:A0:CC:60:AA:6E =
Device=3D/dev/bpf0 Buffer size=3D8192=0A=
Jun 1 23:14:35 pppoe[847]: Timeout waiting for PADO packets=0A=
Jun 1 23:15:37 pppd[866]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 23:15:37 pppd[866]: Using interface ppp0=0A=
Jun 1 23:15:37 pppd[866]: Connect: ppp0 <--> /dev/ttyp2=0A=
Jun 1 23:15:37 pppoe[868]: Interface=3Dtlp0 HWaddr=3D00:A0:CC:60:AA:6E =
Device=3D/dev/bpf0 Buffer size=3D8192=0A=
Jun 1 23:16:08 pppd[866]: LCP: timeout sending Config-Requests =0A=
Jun 1 23:16:08 pppd[866]: Connection terminated.=0A=
Jun 1 23:16:12 pppoe[868]: Timeout waiting for PADO packets=0A=
Jun 1 23:16:12 pppd[866]: Exit.=0A=
Jun 1 23:25:13 pppd[1106]: pppd 2.4.0 started by root, uid 0=0A=
Jun 1 23:25:13 pppd[1106]: Using interface ppp0=0A=
Jun 1 23:25:13 pppd[1106]: Connect: ppp0 <--> /dev/ttyp2=0A=
Jun 1 23:25:13 pppoe[1108]: Interface=3Dtlp0 =
HWaddr=3D00:A0:CC:60:AA:6E Device=3D/dev/bpf0 Buffer size=3D8192=0A=
Jun 1 23:25:44 pppd[1106]: LCP: timeout sending Config-Requests =0A=
Jun 1 23:25:44 pppd[1106]: Connection terminated.=0A=
Jun 1 23:25:48 pppoe[1108]: Timeout waiting for PADO packets=0A=
Jun 1 23:25:48 pppd[1106]: Exit.=0A=
Fri Jun 1 23:25:48 GMT 2001=0A=
---------------------------------------------=0A=
* The following section is a dump of the packets=0A=
* sent and received by rp-pppoe. If you don't see=0A=
* any output, it's an Ethernet driver problem. If you only=0A=
* see three PADI packets and nothing else, check your cables=0A=
* and modem. Make sure the modem lights flash when you try=0A=
* to connect. Check that your Ethernet card is in=0A=
* half-duplex, 10Mb/s mode. If all else fails,=0A=
* try using pppoe-sniff.=0A=
rp-pppoe debugging dump=0A=
rp-pppoe-3.0=0A=
23:25:13.491 SENT PPPoE Discovery (8863) PADI sess-id 0 length 12=0A=
SourceAddr 00:a0:cc:60:aa:6e DestAddr ff:ff:ff:ff:ff:ff=0A=
01 01 00 00 01 03 00 04 54 04 00 00 ........T...=0A=
=0A=
23:25:13.492 RCVD PPPoE Discovery (8863) PADI sess-id 0 length 12=0A=
SourceAddr 00:a0:cc:60:aa:6e DestAddr ff:ff:ff:ff:ff:ff=0A=
01 01 00 00 01 03 00 04 54 04 00 00 ........T...=0A=
=0A=
23:25:18.500 SENT PPPoE Discovery (8863) PADI sess-id 0 length 12=0A=
SourceAddr 00:a0:cc:60:aa:6e DestAddr ff:ff:ff:ff:ff:ff=0A=
01 01 00 00 01 03 00 04 54 04 00 00 ........T...=0A=
=0A=
23:25:18.500 RCVD PPPoE Discovery (8863) PADI sess-id 0 length 12=0A=
SourceAddr 00:a0:cc:60:aa:6e DestAddr ff:ff:ff:ff:ff:ff=0A=
01 01 00 00 01 03 00 04 54 04 00 00 ........T...=0A=
=0A=
23:25:28.510 SENT PPPoE Discovery (8863) PADI sess-id 0 length 12=0A=
SourceAddr 00:a0:cc:60:aa:6e DestAddr ff:ff:ff:ff:ff:ff=0A=
01 01 00 00 01 03 00 04 54 04 00 00 ........T...=0A=
=0A=
23:25:28.510 RCVD PPPoE Discovery (8863) PADI sess-id 0 length 12=0A=
SourceAddr 00:a0:cc:60:aa:6e DestAddr ff:ff:ff:ff:ff:ff=0A=
01 01 00 00 01 03 00 04 54 04 00 00 ........T...=0A=
=0A=
------=_NextPart_000_002C_01C0EAF8.1E035DE0--
______________________________________________________________________________
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com/_reloc/email.emailif