Hi,

I can't get running a Trust pcmcia modem FM560LKI on NetBSD1.5.

Inserting card gives following messages:

pcmcia1: CIS version PC Card Standard 5.0
pcmcia1: CIS info: PCMCIA  , 56K V.90 Fax Modem (LKI) , FM560LKI  
pcmcia1: Manufacturer code 0x175, product 0x0
pcmcia1: function 0: serial port, ccr addr ff80 mask 67
pcmcia1: function 0, config table entry 15: I/O card; irq mask 86bc;
iomask a, iospace 3f8-3ff; rdybsy_active io8 irqshare irqpulse irqlevel
powerdown audio
pcmcia1: function 0, config table entry 23: I/O card; irq mask 86bc;
iomask a, iospace 2f8-2ff; rdybsy_active io8 irqshare irqpulse irqlevel
powerdown audio
pcmcia1: function 0, config table entry 31: I/O card; irq mask 86bc;
iomask a, iospace 3e8-3ef; rdybsy_active io8 irqshare irqpulse irqlevel
powerdown audio
pcmcia1: function 0, config table entry 39: I/O card; irq mask 86bc;
iomask a, iospace 2e8-2ef; rdybsy_active io8 irqshare irqpulse irqlevel
powerdown audio
com0 at pcmcia1 function 0: serial device
com0: ns16550a, working fifo

So it seems to be OK.
But if I try to tip or cu to the modem then:
com0: com_iflush timeout 0d
com0: com_iflush timeout 0d
com0: com_iflush timeout 0d
com0: com_iflush timeout 0d

tip then says "connected" but it's hanging completely. There is no
reaction to Ctrl-D etc. 

The modem runs fine under FreeBSD so what could be the problem here ?

Thanks, David.