Hello,

I am trying to install NetBSD 1.4.2 on an i386 system with 5 SCSI disks and
an Adaptec AIC-7896 controller.  Unfortunately, sysinst reports that it can't
find any hard drives to use.  I have included the boot sequence below for
reference.

Can anyone help me with this situation?

Thanks,

Timothy E. Denehy



    toddpw@vader.toddpw.net:/usr/src/sys/arch/i386/compile/INSTALL
cpu0: family 6 model 7 step 3
cpu0: Intel Pentium III (686-class)
real mem  = 1073348608
avail mem = 993230848
using 4870 buffers containing 53772288 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x71a0 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x71a1 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o enabled, memory enabled
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 0: <CD-ROM CDU4011, , UY04> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
vendor 0x8086 product 0x7112 (USB serial bus, revision 0x01) at pci0 dev 7 function 2 not configured
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
de0 at pci0 dev 13 function 0
de0: interrupting at irq 9
de0: 21143 [10-100Mb/s] pass 4.1 (invalid EESPROM checksum)
de0: address 00:c0:f0:4d:9c:ee
vendor 0x9005 product 0x005f (SCSI mass storage) at pci0 dev 14 function 0 not configured
vendor 0x9005 product 0x005f (SCSI mass storage) at pci0 dev 14 function 1 not configured
vendor 0x5333 product 0x8811 (VGA display, revision 0x54) at pci0 dev 16 function 0 not configured
vendor 0x1318 product 0x0911 (ethernet network, revision 0x01) at pci0 dev 20 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 4040 netmask 4240 ttymask 4242
md0: internal 1587K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
de0: enabling Full Duplex 100baseTX port