looks you haven't configured X yet.  i386 has so many different video
cards/mice/monitors, there is a bit of setup to do.  I've had the best
luck installing the x11/XF86Setup package and then running XF86Setup to
configure all the xserver stuff.

-Dan


On Fri, 4 Feb 2000, Victor Shi wrote:

> 
> 
> Hi all,
> 
> I installed NetBSD 1.4.1 but X window doesn't work.  The following is the
> script output after I "startx".  Could anyone help me out?
> 
> Thanks.
> 
> 
> --------
> 
> Script started on Thu Feb  3 09:49:58 2000
> red# strat   artx
> 
> 
> XFree86 Version 3.3.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: August 4 1997
> 	If the server is older than 6-12 months, or if your card is newer
> 	than the above date, look for a newer version before reporting
> 	problems.  (see http://www.XFree86.Org/FAQ)
> Operating System: NetBSD 1.3 The NetBSD Foundation, Inc.
> Configured drivers:
>   SVGA: server for SVGA graphics adaptors (Patchlevel 0):
>       NV1, STG2000, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
>       ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
>       ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, et3000, pvga1, wd90c00,
>       wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201,
>       sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c,
>       tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr,
>       tgui9320lcd, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
>       tgui9440agi, tgui96xx, cyber938x, clgd5420, clgd5422, clgd5424,
>       clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446,
>       clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225,
>       clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22,
>       ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, oti067, oti077,
>       oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
>       cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65525, ct65530,
>       ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554,
>       ct65555, ct68554, ct64200, ct64300, ark1000vl, ark1000pv, ark2000pv,
>       ark2000mt, mx, realtek, AP6422, AT24, s3_virge, generic
> 
> Fatal server error:
> xf86OpenConsole: No console driver found
> 	Supported drivers: pccons (with X support), pcvt
> 	Check your kernel's console driver configuration and /dev entries
> 
> 
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages
> 
> X connection to :0.0 broken (explicit kill or server shutdown).
> 
> red# exit
> 
> Script done on Thu Feb  3 09:50:34 2000
>   
> 
>