I realise I should have included dmesg:


Copyright (c) 1996, 1997, 1998
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3.2 (amex370) #0: Thu Dec 17 23:40:06 PST 1998
    root@amex370:/usr/src/sys/arch/i386/compile/amex370
cpu0: family 5 model 2 step c
cpu0: Intel Pentium (P54C) (586-class)
real mem  = 16379904
avail mem = 13492224
using 225 buffers containing 921600 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
United Microelectronics UM8891N (host bridge, revision 0xb0) at pci0 dev 0
function 0 not configured
Cirrus Logic CL-GD7548 (VGA display) at pci0 dev 12 function 0 not configured
United Microelectronics product 0xe886 (ISA bridge, revision 0xa3) at pci0 dev
18 function 0 not configured
United Microelectronics UM8673F EIDE Controller (IDE mass storage, interface
0x0a, revision 0xa2) at pci0 dev 18 function 1 not
 configured
Cirrus Logic CL-GD6729 (PCMCIA bridge, revision 0xfe) at pci0 dev 24 function 0
not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <TOSHIBA MK1002MAV>
wd0: using 16-sector 16-bit pio transfers, lba mode
wd0: 1033MB, 2116800 sec, 512 bytes/sec
sb0 at isa0 port 0x220-0x237 irq 7 drq 1 drq2 5: dsp v4.13
audio0 at sb0
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: unknown cirrus, 80 col, color, 8 scr, mf2-kbd, [R3.32]
vt0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4040 ttymask 40c2
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs


On 21-Jan-99 Eric Fox wrote:
> 
> I've got NetBSD 1.3.2 loaded on a Canon notebook (Innova 490CDS).
> 
> Problem is, I can't seem to get things configured correctly so it recognizes
> the Xircom "CreditCard" Ethernet Adapter (PCMCIA).  
> 
> Anyone have any ideas?  BTW: Without ethernet, installing anything on this
> pig
> is a hastle.
> 
> 
>   /\---/\  Eric J Fox
>  /  o o  \ mailto:eric@fox.phoenix.az.us
>  \.\   /./ -----------------------------
>     \@/     "Of course it runs NetBSD."
>