Hey folks,

   I've had this problem for a while and hoped that it would go away 
   when I upgraded to 1.3.2 but it hasn't.  It looks like I am
   unable to play music on my Sony CDU-76S cdrom.  This is the
   error I get on the console...

 cd0(bha0:3:0):  Check Condition on opcode 0x15
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Field In Parameter List

   I don't get it.  Any suggestions would be greatly appreciated.

   Brad

   Other info:

Copyright (c) 1996, 1997, 1998
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3.2 (CAMELOT) #1: Sat Jul 11 16:37:57 EDT 1998
    root@camelot:/mnt/disk1f/src/sys/arch/i386/compile/CAMELOT
cpu0: family 4 model 3 step 5
cpu0: Intel 486DX2 (486-class)
real mem  = 20578304
avail mem = 18198528
using 276 buffers containing 1130496 bytes of memory
mainbus0 (root)
isa0 at mainbus0
bha0 at isa0 port 0x330-0x333 irq 11
bha0: model BT-44xC, firmware 4.25J
bha0: sync, parity
bha0 targ 3: sync, offset 15, period 200nsec
scsibus0 at bha0: 8 targets
st0 at scsibus0 targ 1 lun 0: <ARCHIVE, VIPER 150  21247, -603> SCSI1 1/sequenti
al removable
st0: rogue, drive empty
cd0 at scsibus0 targ 3 lun 0: <SONY, CD-ROM CDU-76S, 1.1a> SCSI2 5/cdrom removab
le
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <FUJITSU M1623TAU>
wd0: using 16-sector 16-bit pio transfers, lba mode
wd0: 1623MB, 3324996 sec, 512 bytes/sec
wd1 at wdc0 drive 1: <Maxtor 7345 AT>
wd1: using 16-sector 16-bit pio transfers, chs mode
wd1: 329MB, 790 cyl, 15 head, 57 sec, 512 bytes/sec
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
wd2 at wdc1 drive 0: <Maxtor 7213 AT>
wd2: using 16-sector 16-bit pio transfers, chs mode
wd2: 202MB, 683 cyl, 16 head, 38 sec, 512 bytes/sec
we0 at isa0 port 0x280-0x29f iomem 0xd0000-0xd3fff irq 9
we0: WD8013EP Ethernet (16-bit)
we0: Ethernet address 00:00:c0:98:94:26
sb0 at isa0 port 0x220-0x237 irq 7 drq 1 drq2 5: dsp v4.12
audio0 at sb0
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: et4000, 80/132 col, color, 8 scr, mf2-kbd, [R3.32]
spkr0 at vt0 port 0x61
vt0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask c840 netmask ca40 ttymask cac2
boot device: wd0
root on wd0a dumps on wd0b
lpt0: offline
root file system type: ffs