Matthew Patton <patton@sysnet.net> writes:

> By now I'm sure you're aware that IRQ2 is used to cascade onto the second 
> interrupt handler circuit at IRQ9.  No devices should be placed on either 
> of these.
> 
> With your handy DOS based etherexpress setup disk, force the card into an 
> IRQ.  10 is the most common one I've seen but I believe you havd and 
> Adaptec on that port.  You probably need to set and write down teh bios 
> map as well as the amount of on-card RAM.  Long ago I vaguely recall that 
> cards <16kb didn't work right.

Changing from irq 9 to irq 11 fixed it.  Thanks.