I installed a netbsd-1.2 on a hp360 and ran into few problems:

1. The generic kernel works only with an US-Keyboard, not with my
   German keyboard.

   Any solutions ?

2. I need a Xserver for this machine, because the idea is to use the
   machine as a XTerminal.

   Can anybody point me to a (european prefered) location for a
   hp300-X-package for this machine ?

please reply directly to me (werner@btp1da.phy.uni-bayreuth.de)
because I'm not member of the list.

Many thanks,
Werner

Here is the "dmesg" from the machine:

NetBSD 1.2 (GENERIC) #7: Sun Sep 15 16:15:20 PDT 1996
    thorpej@basalt:/u3/NetBSD-1.2/src/sys/arch/hp300/compile/GENERIC
HP9000/360 (25MHz MC68030 CPU+MMU, 25MHz MC68882 FPU)
delay constant for this cpu: 81
real mem = 8380416
avail mem = 5099520
using 204 buffers containing 835584 bytes of memory
hil1: US ASCII keyboard
dma0: 98620C, 2 channels, 32 bit
grf0 at addr 0x560000: 1024 x 768 64 color topcat display (console)
ite0 at grf0: attached
hpib0 at scode7 ipl 3: Internal HP-IB
rd0 at hpib0 slave 0: 7958B
rd0: 786 cylinders, 9 heads, 297108 blocks, 512 bytes/block
rd1 at hpib0 slave 1: 7958B
rd1: 786 cylinders, 9 heads, 297108 blocks, 512 bytes/block
rd2 at hpib0 slave 2: 7957B
rd2: 1269 cylinders, 7 heads, 159894 blocks, 512 bytes/block
ppi0 at hpib0 slave 5
dca0 at scode9 ipl 5 flags 0x1: no fifo
hpib1 at scode14 ipl 4: 98625A or 98625B fast HP-IB
le0 at scode21 ipl 5: address 08:00:09:02:44:fc
le0: 8 receive buffers, 2 transmit buffers
Changing root device to rd0a