Re: install/58288

["DF4NX via gnats" <gnats-admin%NetBSD.org@localhost>]

The following reply was made to PR install/58288; it has been noted by GNATS.

From: DF4NX <df4nx%gmx.net@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: install/58288
Date: Sat, 26 Sep 2026 17:38:47 +0200

 Hi,
 
 I have the same problem with "Window too short ..." on my Acer Aspire=20
 One netbook. A workaround is to type
 
 # wsconctl -dw font=3DBoldface
 # exit
 
 on the screen. This returns with a smaller font to the installer and=20
 installation can proceed. This happens on NetBSD 11.0
 
 dmesg:
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
      2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
      2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
      2024, 2025, 2026
      The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
      The Regents of the University of California.  All rights reserved.
 
 NetBSD 11.0 (GENERIC) #0: Thu Jul 30 15:23:12 UTC 2026
 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
 total memory =3D 1013 MB
 avail memory =3D 952 MB
 timecounter: Timecounters tick every 10.000 msec
 Kernelized RAIDframe activated
 RTC BIOS diagnostic error 0x80<clock_battery>
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 mainbus0 (root)
 ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
 ACPI: XSDT 0x000000003F5FE120 000064 (v01 ACRSYS ACRPRDCT 00000001=20
 01000013)
 ACPI: FACP 0x000000003F5FD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025=20
 01000013)
 ACPI: DSDT 0x000000003F5F1000 008DCF (v01 ACRSYS ACRPRDCT 00000001 1025=20
 01000013)
 ACPI: FACS 0x000000003F584000 000040
 ACPI: HPET 0x000000003F5FC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025=20
 01000013)
 ACPI: APIC 0x000000003F5FB000 000078 (v02 ACRSYS ACRPRDCT 00000001 1025=20
 01000013)
 ACPI: MCFG 0x000000003F5FA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025=20
 01000013)
 ACPI: SLIC 0x000000003F5F0000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025=20
 01000013)
 ACPI: BOOT 0x000000003F5EF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025=20
 01000013)
 ACPI: SSDT 0x000000003F5ED000 000655 (v01 PmRef  CpuPm    00003000 INTL=20
 20051117)
 ACPI: WDAT 0x000000003F5EC000 000194 (v01 INSYDE INSYDE   00000001 MSFT=20
 01000013)
 ACPI: 2 ACPI AML tables successfully acquired and loaded
 ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x20, 24 pins
 cpu0 at mainbus0 apid 0
 cpu0: Use lfence to serialize rdtsc
 cpu0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz, id 0x106ca
 cpu0: node 0, package 0, core 0, smt 0
 cpu1 at mainbus0 apid 1
 cpu1: Intel(R) Atom(TM) CPU N450   @ 1.66GHz, id 0x106ca
 cpu1: node 0, package 0, core 0, smt 1
 acpi0 at mainbus0: Intel ACPICA 20241212
 acpi0: X/RSDT: OemId <ACRSYS,ACRPRDCT,00000001>, AslId <    ,01000013>
 acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFB08A53028008 000708 (v01 PmRef  Cpu0Ist  00003000 INTL=20
 20051117)
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFB08A53028808 000646 (v01 PmRef  Cpu0Cst  00003001 INTL=20
 20051117)
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFB08A8E0BF348 00015F (v01 PmRef  ApIst    00003000 INTL=20
 20051117)
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFB08A52FA1E88 00008D (v01 PmRef  ApCst    00003000 INTL=20
 20051117)
 acpi0: SCI interrupting at int 9
 acpi0: fixed power button present
 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
 acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
 acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
 acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
 attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
 FWHD (INT0800) at acpi0 not configured
 pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
 pckbc2 at acpi0 (MSS0, SYN1B1C) (aux port): irq 12
 acpivga0 at acpi0 (OVGA): ACPI Display Adapter
 acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
 acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
 acpiout1: brightness levels: [10,20,30,40,50,60,70,80,90,100]
 acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output Device
 acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
 acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
 acpivga0: connected output devices:
 acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0
 acpiwmi0 at acpi0 (WMID, PNP0C14-APGe): ACPI WMI Interface
 acpiwmibus at acpiwmi0 not configured
 acpifan0 at acpi0 (FAN, PNP0C0B-0): ACPI Fan
 acpitz0 at acpi0 (THRM): cpu0
 acpitz0: active cooling level 0: 70.0C
 acpitz0: levels: critical 100.0 C, passive 95.0 C
 ACPI: Enabled 5 GPEs in block 00 to 1F
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc1 (aux slot)
 pms0: Synaptics touchpad version 7.2
 pms0: Extended W mode, Palm detect, Multi-finger Report, Reports max
 pms0: Probed max coordinates right: 5612, top: 4618
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: Intel Pineview Host Bridge (rev. 0x00)
 agp0 at pchb0: Pineview chipset
 agp0: detected 7164k stolen memory
 agp0: aperture at 0x40000000, size 0x10000000
 i915drmkms0 at pci0 dev 2 function 0: Intel Pineview Integrated Graphics=
 =20
 Device (rev. 0x00)
 Intel Pineview Integrated Graphics Device (miscellaneous display) at=20
 pci0 dev 2 function 1 not configured
 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio0: interrupting at msi0 vec 0
 hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
 hdafg0 at hdaudio0: Realtek ALC272
 hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
 hdafg0: ADC01 2ch: Mic In [Built-In]
 hdafg0: ADC02 2ch: Mic In [Jack]
 hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
 audio0 at hdafg0: playback, capture, full duplex, independent
 audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
 audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
 spkr0 at audio0: PC Speaker (synthesized)
 wsbell at spkr0 not configured
 ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1=20
 (rev. 0x02)
 ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex>=
 =20
 x1 @ 2.5GT/s
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 alc0 at pci1 dev 0 function 0: Atheros AR8152 v1.1 PCIe Fast Ethernet
 alc0: interrupting at ioapic0 pin 16
 alc0: Ethernet address 1c:75:08:43:a4:62
 atphy0 at alc0 phy 0: L2 10/100 PHY, rev. 4
 atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2=20
 (rev. 0x02)
 ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex>=
 =20
 x1 @ 2.5GT/s
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 athn0 at pci2 dev 0 function 0: Atheros AR9285
 athn0: rev 2 (1T1R), ROM rev 14, address 88:9f:fa:2a:5b:80
 athn0: interrupting at ioapic0 pin 17
 uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller=20
 (rev. 0x02)
 uhci0: interrupting at ioapic0 pin 18
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller=20
 (rev. 0x02)
 uhci1: interrupting at ioapic0 pin 20
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller=20
 (rev. 0x02)
 uhci2: interrupting at ioapic0 pin 21
 usb2 at uhci2: USB revision 1.0
 uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller=20
 (rev. 0x02)
 uhci3: interrupting at ioapic0 pin 22
 usb3 at uhci3: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller=20
 (rev. 0x02)
 ehci0: 64-bit DMA
 ehci0: interrupting at ioapic0 pin 22
 ehci0: EHCI version 1.0
 ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
 ehci0: Using DMA subregion for control data structures
 usb4 at ehci0: USB revision 2.0
 ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
 pci3 at ppb2 bus 5
 pci3: i/o space, memory space enabled
 ichlpcib0 at pci0 dev 31 function 0: Intel NM10 Family LPC Interface=20
 Bridge (rev. 0x02)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 tco0 at ichlpcib0: TCO (watchdog) timer configured.
 tco0: Min/Max interval 1/367 seconds
 ahcisata0 at pci0 dev 31 function 2: Intel 82801GB/GR AHCI SATA=20
 Controller (rev. 0x02)
 ahcisata0: 64-bit DMA
 ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP=20
 0xdf22ff03<PSC,SSC,PMD,SPM,ISS=3D0x2=3DGen2,SCLO,SAL,SALP,SSS,SMPS,SNCQ,S6=
 4A>
 ahcisata0: interrupting at msi1 vec 0
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 1
 ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller=20
 (rev. 0x02)
 ichsmb0: interrupting at ioapic0 pin 17
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 pcppi0 at isa0 port 0x61
 spkr1 at pcppi0: PC Speaker
 wsbell at spkr1 not configured
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 attimer1: attached to pcppi0
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
 acpicpu0: C2: FFH, lat  20 us, pow   500 mW
 acpicpu0: C3: FFH, lat 100 us, pow   100 mW, bus master check
 acpicpu0: P0: FFH, lat  10 us, pow  2000 mW, 1666 MHz
 acpicpu0: P1: FFH, lat  10 us, pow  1300 mW, 1333 MHz
 acpicpu0: P2: FFH, lat  10 us, pow   600 mW, 1000 MHz
 acpicpu1 at cpu1: ACPI CPU
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 IPsec: Initialized Security Association Processing.
 uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev=20
 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev=20
 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev=20
 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev=20
 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev=20
 2.00/1.00, addr 1
 uhub4: 8 ports with 8 removable, self powered
 acpiacad0: AC adapter online.
 ahcisata0 port 0: device present, speed: 3.0Gb/s
 ahcisata0 port 1: PHY offline
 uvideo0 at uhub4 port 4 configuration 1 interface 0: Suyin (0x064e) 1.3M=
 =20
 WebCam (0xa219), rev 2.00/2.15, addr 2
 video0 at uvideo0: Suyin (0x064e) 1.3M WebCam (0xa219), rev 2.00/2.15,=20
 addr 2
 wd0 at atabus0 drive 0
 wd0: <TOSHIBA MK2565GSX>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 secto=
 rs
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5=20
 (Ultra/100), WRITE DMA FUA, NCQ (32 tags)
 wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5=20
 (Ultra/100) (using DMA), NCQ (31 tags)
 swwdog0: software watchdog initialized
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 kern.module.path=3D/stand/amd64/11.0/modules
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] Driver supports precise vblank timestamp query.
 i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
 [drm] Initialized overlay support.
 [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
 intelfb0 at i915drmkms0
 [drm] DRM_I915_DEBUG enabled
 [drm] DRM_I915_DEBUG_GEM enabled
 intelfb0: framebuffer at 0x40009000, size 1024x600, depth 32, stride 4096
 wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation),=20
 using wskbd0
 wsmux1: connecting to wsdisplay0
 wsdisplay0: screen 1 added (default, vt100 emulation)
 wsdisplay0: screen 2 added (default, vt100 emulation)
 wsdisplay0: screen 3 added (default, vt100 emulation)
 wsdisplay0: screen 4 added (default, vt100 emulation)
 wsdisplay0: screen 5 added (default, vt100 emulation)
 wsdisplay0: screen 6 added (default, vt100 emulation)