NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
port-amd64/60405: UEFI boot hangs with blank screen
>Number: 60405
>Category: port-amd64
>Synopsis: UEFI boot hangs with blank screen
>Confidential: no
>Severity: critical
>Priority: medium
>Responsible: port-amd64-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sat Jul 04 19:20:00 +0000 2026
>Originator: Martin Husemann
>Release: NetBSD 11.99.6
>Organization:
The NetBSD Foundation, Inc.
>Environment:
System: NetBSD martins.aprisoft.de 11.99.6 NetBSD 11.99.6 (GENERIC) #306: Sat Jun 27 10:46:54 CEST 2026 martin%martins.aprisoft.de@localhost:/home/martin/current/src/sys/arch/amd64/compile/GENERIC amd64
Architecture: x86_64
Machine: amd64
>Description:
On this machine:
machdep.dmi.board-vendor = ASUSTeK Computer INC.
machdep.dmi.board-product = P8P67
booting via UEFI does not work. The kernel is loaded and then the screen
instantly turns black, and the system seems to hang.
This also happens when I drop to the boot prompt and select a different gop.
Boting via BIOS works and gives this dmesg output:
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.000000] 2024, 2025, 2026
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 11.99.6 (GENERIC) #0: Wed Jul 1 10:58:38 UTC 2026
[ 1.000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 16351 MB
[ 1.000000] avail memory = 15789 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 1.000004] ACPI: XSDT 0x00000000DF38D078 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 1.000004] ACPI: FACP 0x00000000DF398598 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 1.000004] ACPI: DSDT 0x00000000DF38D170 00B424 (v02 ALASKA A M I 00000015 INTL 20051117)
[ 1.000004] ACPI: FACS 0x00000000DF3B8F80 000040
[ 1.000004] ACPI: APIC 0x00000000DF398690 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 1.000004] ACPI: MCFG 0x00000000DF398708 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 1.000004] ACPI: HPET 0x00000000DF398748 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 1.000004] ACPI: SSDT 0x00000000DF398780 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 1.000004] ACPI: SSDT 0x00000000DF398AF0 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 1.000004] ACPI: SSDT 0x00000000DF3994A0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 1.000004] ACPI: BGRT 0x00000000DF399F90 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 1.000004] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
[ 1.000004] cpu0 at mainbus0 apid 0
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, id 0x206a7
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 2
[ 1.000004] cpu1: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, id 0x206a7
[ 1.000004] cpu1: node 0, package 0, core 1, smt 0
[ 1.000004] cpu2 at mainbus0 apid 4
[ 1.000004] cpu2: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, id 0x206a7
[ 1.000004] cpu2: node 0, package 0, core 2, smt 0
[ 1.000004] cpu3 at mainbus0 apid 6
[ 1.000004] cpu3: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, id 0x206a7
[ 1.000004] cpu3: node 0, package 0, core 3, smt 0
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20260408
[ 1.000004] acpi0: X/RSDT: OemId <ALASKA, A M I,01072009>, AslId <AMI ,00010013>
[ 1.000004] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFB1A5E5607008 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFB1A8E2EEB8C8 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFB1A5E559C7C8 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[ 1.034203] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.034203] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1.034316] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
[ 1.034316] TPMX (PNP0C01) at acpi0 not configured
[ 1.034316] FWHD (INT0800) at acpi0 not configured
[ 1.034316] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
[ 1.034316] com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
[ 1.034316] com0: ns16550a, 16-byte FIFO
[ 1.034316] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
[ 1.034316] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
[ 1.034316] acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
[ 1.034316] acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
[ 1.034316] acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
[ 1.034316] acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
[ 1.034316] acpitz0 at acpi0 (TZ00)
[ 1.034316] acpitz0: active cooling level 0: 80.0C
[ 1.034316] acpitz0: active cooling level 1: 55.0C
[ 1.034316] acpitz0: active cooling level 2: 0.0C
[ 1.034316] acpitz0: active cooling level 3: 0.0C
[ 1.034316] acpitz0: active cooling level 4: 0.0C
[ 1.034316] acpitz0: levels: critical 99.0 C
[ 1.034316] acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
[ 1.034316] acpitz1: levels: critical 99.0 C, passive 99.0 C, passive cooling
[ 1.034316] acpiwmi0 at acpi0 (AMW0, PNP0C14-ASUSWMI): ACPI WMI Interface
[ 1.034316] wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
[ 1.034316] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 1.034316] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.034316] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.034316] pchb0 at pci0 dev 0 function 0: Intel Sandy Bridge (desktop) Host Bridge (rev. 0x09)
[ 1.034316] ppb0 at pci0 dev 1 function 0: Intel Sandy Bridge (desktop) PCIe Root port (rev. 0x09)
[ 1.034316] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
[ 1.034316] pci1 at ppb0 bus 1
[ 1.034316] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.034316] radeon0 at pci1 dev 0 function 0: ATI Technologies Mobility Radeon HD 5430 (rev. 0x00)
[ 1.034316] hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
[ 1.034316] hdaudio0: interrupting at msi0 vec 0
[ 1.034316] hdaudio0: HDA ver. 1.0, OSS 1, ISS 0, BSS 0, SDO 1, 64-bit
[ 1.034316] hdafg0 at hdaudio0: ATI R6xx HDMI
[ 1.034316] hdafg0: HDMI00 2ch: Digital Out [Jack]
[ 1.034316] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
[ 1.034316] audio0 at hdafg0: playback
[ 1.034316] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.034316] spkr0 at audio0: PC Speaker (synthesized)
[ 1.034316] wsbell at spkr0 not configured
[ 1.034316] Intel 6 Series Chipset Family MEI (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
[ 1.034316] ehci0 at pci0 dev 26 function 0: Intel 6 Series Chipset Family USB (rev. 0x05)
[ 1.034316] ehci0: 64-bit DMA
[ 1.034316] ehci0: interrupting at ioapic0 pin 16
[ 1.034316] ehci0: BIOS has given up ownership
[ 1.034316] ehci0: EHCI version 1.0
[ 1.034316] ehci0: Using DMA subregion for control data structures
[ 1.034316] usb0 at ehci0: USB revision 2.0
[ 1.034316] hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
[ 1.034316] hdaudio1: interrupting at msi1 vec 0
[ 1.034316] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1.034316] hdafg1 at hdaudio1: Realtek ALC892
[ 1.034316] hdafg1: DAC00 8ch: Speaker [Jack]
[ 1.034316] hdafg1: DAC01 2ch: HP Out [Jack]
[ 1.034316] hdafg1: DIG02 2ch: SPDIF Out [Jack]
[ 1.034316] hdafg1: DIG03 2ch: SPDIF Out [Built-In]
[ 1.034316] hdafg1: ADC04 2ch: Line In [Jack], Mic In [Jack]
[ 1.034316] hdafg1: ADC05 2ch: Mic In [Jack]
[ 1.034316] hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[ 1.034316] audio1 at hdafg1: playback, capture, full duplex, independent
[ 1.034316] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.034316] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.034316] spkr1 at audio1: PC Speaker (synthesized)
[ 1.034316] wsbell at spkr1 not configured
[ 1.034316] hdaudio1: autoconfiguration error: RIRB timeout
[ 1.034316] hdaudio1: autoconfiguration error: RIRB timeout
[ 1.034316] ppb1 at pci0 dev 28 function 0: Intel 6 Series Chipset Family PCIe Root Port 1 (rev. 0xb5)
[ 1.034316] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.034316] pci2 at ppb1 bus 2
[ 1.034316] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.034316] ppb2 at pci0 dev 28 function 1: Intel 6 Series Chipset Family PCIe Root Port 2 (rev. 0xb5)
[ 1.034316] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.034316] pci3 at ppb2 bus 3
[ 1.034316] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.034316] xhci0 at pci3 dev 0 function 0: NEC Renesas Electronics USB 3.0 Host Controller (rev. 0x04)
[ 1.034316] xhci0: 64-bit DMA
[ 1.034316] xhci0: interrupting at msix2 vec 0
[ 1.034316] xhci0: xHCI version 0.96
[ 1.034316] usb1 at xhci0: USB revision 3.0
[ 1.034316] usb2 at xhci0: USB revision 2.0
[ 1.034316] ppb3 at pci0 dev 28 function 4: Intel 6 Series Chipset Family PCIe Root Port 5 (rev. 0xb5)
[ 1.034316] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.034316] pci4 at ppb3 bus 4
[ 1.034316] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.034316] xhci1 at pci4 dev 0 function 0: NEC Renesas Electronics USB 3.0 Host Controller (rev. 0x04)
[ 1.034316] xhci1: 64-bit DMA
[ 1.034316] xhci1: interrupting at msix3 vec 0
[ 1.034316] xhci1: xHCI version 0.96
[ 1.034316] usb3 at xhci1: USB revision 3.0
[ 1.034316] usb4 at xhci1: USB revision 2.0
[ 1.034316] ppb4 at pci0 dev 28 function 5: Intel 6 Series Chipset Family PCIe Root Port 6 (rev. 0xb5)
[ 1.034316] ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.034316] ppb4: link is x1 @ 2.5GT/s
[ 1.034316] pci5 at ppb4 bus 5
[ 1.034316] pci5: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.034316] re0 at pci5 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
[ 1.034316] re0: interrupting at msix4 vec 0
[ 1.034316] re0: RTL8168E/8111E-VL (0x2c80)
[ 1.034316] re0: Ethernet address f4:6d:04:ac:71:05
[ 1.034316] re0: using 1024 tx descriptors
[ 1.034316] rgephy0 at re0 phy 7: RTL8211E 1000BASE-T media interface
[ 1.034316] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.034316] ppb5 at pci0 dev 28 function 6: Intel 82801BA Hub-PCI Bridge (rev. 0xb5)
[ 1.034316] ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.034316] ppb5: link is x1 @ 2.5GT/s
[ 1.034316] pci6 at ppb5 bus 6
[ 1.034316] pci6: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.034316] ppb6 at pci6 dev 0 function 0: ASMedia ASM1083/1085 PCIe-PCI Bridge (rev. 0x01)
[ 1.034316] pci7 at ppb6 bus 7
[ 1.034316] pci7: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.034316] fwohci0 at pci7 dev 3 function 0: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0xc0)
[ 1.034316] fwohci0: interrupting at ioapic0 pin 17
[ 1.034316] fwohci0: OHCI version 1.10 (ROM=1)
[ 1.034316] fwohci0: No. of Isochronous channels is 4.
[ 1.034316] fwohci0: EUI64 00:1e:8c:00:00:47:09:a7
[ 1.034316] fwohci0: Phy 1394a available S400, 2 ports.
[ 1.034316] fwohci0: Link S400, max_rec 2048 bytes.
[ 1.034316] ieee1394if0 at fwohci0: IEEE1394 bus
[ 1.034316] fwip0 at ieee1394if0: IP over IEEE1394
[ 1.034316] fwohci0: Initiate bus reset
[ 1.034316] ppb7 at pci0 dev 28 function 7: Intel 6 Series Chipset Family PCIe Root Port 8 (rev. 0xb5)
[ 1.034316] ppb7: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.034316] pci8 at ppb7 bus 8
[ 1.034316] pci8: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.034316] ahcisata0 at pci8 dev 0 function 0: Marvell 88SE9172 SATA Controller (rev. 0x11)
[ 1.034316] ahcisata0: 64-bit DMA
[ 1.034316] ahcisata0: AHCI revision 1.0, 2 ports, 32 slots, CAP 0xe237ff21<SXS,PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SAL,SSNTF,SNCQ,S64A>
[ 1.034316] ahcisata0: interrupting at msi5 vec 0
[ 1.034316] atabus0 at ahcisata0 channel 0
[ 1.034316] atabus1 at ahcisata0 channel 1
[ 1.034316] ehci1 at pci0 dev 29 function 0: Intel 6 Series Chipset Family USB (rev. 0x05)
[ 1.034316] ehci1: 64-bit DMA
[ 1.034316] ehci1: interrupting at ioapic0 pin 23
[ 1.034316] ehci1: BIOS has given up ownership
[ 1.034316] ehci1: EHCI version 1.0
[ 1.034316] ehci1: Using DMA subregion for control data structures
[ 1.034316] usb5 at ehci1: USB revision 2.0
[ 1.034316] ichlpcib0 at pci0 dev 31 function 0: Intel P67 LPC (rev. 0x05)
[ 1.034316] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
[ 1.034316] ichlpcib0: 24-bit timer
[ 1.034316] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.034316] tco0: Min/Max interval 1/367 seconds
[ 1.034316] ahcisata1 at pci0 dev 31 function 2: Intel 6 Series Chipset Family AHCI 1 (rev. 0x05)
[ 1.034316] ahcisata1: 64-bit DMA
[ 1.034316] ahcisata1: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
[ 1.034316] ahcisata1: interrupting at msi6 vec 0
[ 1.034316] atabus2 at ahcisata1 channel 3
[ 1.034316] atabus3 at ahcisata1 channel 4
[ 1.034316] ichsmb0 at pci0 dev 31 function 3: Intel 6 Series Chipset Family SMBus Controller (rev. 0x05)
[ 1.034316] ichsmb0: interrupting at ioapic0 pin 18
[ 1.034316] iic0 at ichsmb0: I2C bus
[ 1.034316] isa0 at ichlpcib0
[ 1.034316] pckbc0 at isa0 port 0x60-0x64
[ 1.034316] pcppi0 at isa0 port 0x61
[ 1.034316] spkr2 at pcppi0: PC Speaker
[ 1.034316] wsbell at spkr2 not configured
[ 1.034316] midi0 at pcppi0: PC speaker
[ 1.034316] sysbeep0 at pcppi0
[ 1.034316] attimer1: attached to pcppi0
[ 1.034316] acpicpu0 at cpu0: ACPI CPU
[ 1.034316] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.034316] acpicpu0: C2: FFH, lat 80 us, pow 500 mW
[ 1.034316] acpicpu0: C3: FFH, lat 104 us, pow 350 mW
[ 1.034316] acpicpu0: P0: FFH, lat 10 us, pow 95000 mW, 3301 MHz, turbo boost
[ 1.034316] acpicpu0: P1: FFH, lat 10 us, pow 95000 mW, 3300 MHz
[ 1.034316] acpicpu0: P2: FFH, lat 10 us, pow 90163 mW, 3200 MHz
[ 1.034316] acpicpu0: P3: FFH, lat 10 us, pow 86347 mW, 3100 MHz
[ 1.034316] acpicpu0: P4: FFH, lat 10 us, pow 78924 mW, 2900 MHz
[ 1.034316] acpicpu0: P5: FFH, lat 10 us, pow 75316 mW, 2800 MHz
[ 1.034316] acpicpu0: P6: FFH, lat 10 us, pow 71791 mW, 2700 MHz
[ 1.034316] acpicpu0: P7: FFH, lat 10 us, pow 68319 mW, 2600 MHz
[ 1.034316] acpicpu0: P8: FFH, lat 10 us, pow 61575 mW, 2400 MHz
[ 1.034316] acpicpu0: P9: FFH, lat 10 us, pow 58302 mW, 2300 MHz
[ 1.034316] acpicpu0: P10: FFH, lat 10 us, pow 55107 mW, 2200 MHz
[ 1.034316] acpicpu0: P11: FFH, lat 10 us, pow 51964 mW, 2100 MHz
[ 1.034316] acpicpu0: P12: FFH, lat 10 us, pow 48886 mW, 2000 MHz
[ 1.034316] acpicpu0: P13: FFH, lat 10 us, pow 42921 mW, 1800 MHz
[ 1.034316] acpicpu0: P14: FFH, lat 10 us, pow 40033 mW, 1700 MHz
[ 1.034316] acpicpu0: P15: FFH, lat 10 us, pow 37215 mW, 1600 MHz
[ 1.034316] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=98
[ 1.034316] acpicpu1 at cpu1: ACPI CPU
[ 1.034316] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=98
[ 1.034316] acpicpu2 at cpu2: ACPI CPU
[ 1.034316] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=98
[ 1.034316] acpicpu3 at cpu3: ACPI CPU
[ 1.034316] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=98
[ 1.034316] fwohci0: BUS reset
[ 1.034316] fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
[ 1.034316] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
[ 1.034316] ieee1394if0: bus manager 0
[ 1.034316] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.034316] timecounter: Timecounter "TSC" frequency 3310797000 Hz quality 3000
[ 1.270730] uhub0 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.270730] uhub0: 2 ports with 2 removable, self powered
[ 1.270730] uhub1 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.270730] uhub1: 2 ports with 2 removable, self powered
[ 1.270730] uhub2 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.270730] uhub2: 2 ports with 2 removable, self powered
[ 1.270730] uhub3 at usb4: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.270730] uhub3: 2 ports with 2 removable, self powered
[ 1.270730] IPsec: Initialized Security Association Processing.
[ 1.288001] uhub4 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.288001] uhub4: 2 ports with 2 removable, self powered
[ 1.288001] uhub5 at usb5: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.288001] uhub5: 2 ports with 2 removable, self powered
[ 1.368001] ahcisata1 port 3: device present, speed: 1.5Gb/s
[ 1.368001] ahcisata1 port 4: device present, speed: 3.0Gb/s
[ 1.748000] umass0 at uhub3 port 1 configuration 1 interface 0
[ 1.748000] umass0: Generic (0x1234) Flash Disk (0x5678), rev 2.00/1.00, addr 1
[ 1.748000] umass0: using SCSI over Bulk-Only
[ 1.748000] scsibus0 at umass0: 2 targets, 1 lun per target
[ 1.748000] sd0 at scsibus0 target 0 lun 0: <Generic, Flash Disk, 5.00> disk removable
[ 1.748000] sd0: fabricating a geometry
[ 1.748000] sd0: 4040 MB, 4040 cyl, 64 head, 32 sec, 512 bytes/sect x 8273920 sectors
[ 1.748000] sd0: fabricating a geometry
[ 1.758000] sd0: GPT GUID: d018c300-753b-11f1-8000-000000000000
[ 1.758000] dk0 at sd0: "EFI system", 262144 blocks at 2048, type: msdos
[ 1.758000] dk1 at sd0: "NBImgRoot", 3639296 blocks at 264192, type: ffs
[ 2.357999] uhub6 at uhub5 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
[ 2.357999] uhub6: single transaction translator
[ 2.357999] uhub7 at uhub4 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
[ 2.357999] uhub7: single transaction translator
[ 2.357999] uhub6: 8 ports with 8 removable, self powered
[ 2.357999] uhub7: 6 ports with 6 removable, self powered
[ 2.897998] atapibus0 at atabus2: 1 targets
[ 2.897998] cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GH22NS70, K1GB4JA5055, EX00> cdrom removable
[ 2.907998] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[ 2.907998] cd0(ahcisata1:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
[ 2.907998] wd0 at atabus3 drive 0
[ 2.907998] wd0: <Samsung SSD 850 EVO 250GB>
[ 2.907998] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
[ 2.907998] wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
[ 2.917998] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 2.917998] wd0(ahcisata1:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 3.227997] uhidev0 at uhub6 port 5 configuration 1 interface 0
[ 3.227997] uhidev0: Dell (0x413c) Dell USB Keyboard (0x2105), rev 1.10/3.52, addr 3, iclass 3/1
[ 3.227997] ukbd0 at uhidev0
[ 3.227997] wskbd0 at ukbd0: console keyboard
[ 3.737997] uhidev1 at uhub6 port 6 configuration 1 interface 0
[ 3.737997] uhidev1: PixArt (0x04f2) USB Optical Mouse (0x0939), rev 2.00/1.00, addr 4, iclass 3/1
[ 3.737997] ums0 at uhidev1: 3 buttons and Z dir
[ 3.737997] wsmouse0 at ums0 mux 0
[ 4.247996] aubtfwl0 at uhub6 port 7
[ 4.247996] swwdog0: software watchdog initialized
[ 4.297996] WARNING: 2 errors while detecting hardware; check system log.
[ 4.297996] boot device: sd0
[ 4.297996] root on dk1
[ 4.297996] root file system type: ffs
[ 4.297996] kern.module.path=/stand/amd64/11.99.6/modules
[ 4.306569] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E1 0x174B:0x6000 0x00).
[ 4.306569] [drm] register mmio base: 0xf7e20000
[ 4.306569] [drm] register mmio size: 131072
[ 4.918001] ATOM BIOS: PARK
[ 4.918001] radeon0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 4.918001] radeon0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 4.918001] [drm] Detected VRAM RAM=200M, BAR=256M
[ 4.918001] [drm] RAM width 64bits DDR
[ 4.918001] Zone kernel: Available graphics memory: 9007199252887496 KiB
[ 4.918001] Zone dma32: Available graphics memory: 2097152 KiB
[ 4.918001] [drm] radeon: 512M of VRAM memory ready
[ 4.918001] [drm] radeon: 1024M of GTT memory ready.
[ 4.918001] [drm] Loading CEDAR Microcode
[ 4.927995] aubtfwl0: autoconfiguration error: 'ath3k-1.fw' open fail 2
[ 4.937995] [drm] Internal thermal controller with fan control
[ 4.957994] [drm] radeon: dpm initialized
[ 4.967995] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.977996] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[ 4.977996] radeon0: WB enabled
[ 4.977996] radeon0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xffffb1a5e6a79c00
[ 4.977996] radeon0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xffffb1a5e6a79c0c
[ 4.977996] radeon0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffffd304bf5fc418
[ 4.977996] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.977996] [drm] Driver supports precise vblank timestamp query.
[ 4.977996] radeon0: radeon: MSI limited to 32-bit
[ 4.977996] radeon0: radeon: using MSI.
[ 4.977996] radeon0: interrupting at msi7 vec 0 (radeon0)
[ 4.977996] [drm] radeon: irq initialized.
[ 4.987994] [drm] ring test on 0 succeeded in 1 usecs
[ 4.987994] [drm] ring test on 3 succeeded in 2 usecs
[ 5.177993] [drm] ring test on 5 succeeded in 1 usecs
[ 5.177993] [drm] UVD initialized successfully.
[ 5.177993] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5.177993] [drm] ib test on ring 3 succeeded in 0 usecs
[ 5.847993] [drm] ib test on ring 5 succeeded
[ 5.847993] [drm] Radeon Display Connectors
[ 5.847993] [drm] Connector 0:
[ 5.847993] [drm] HDMI-A-1
[ 5.847993] [drm] HPD2
[ 5.847993] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 5.847993] [drm] Encoders:
[ 5.847993] [drm] DFP1: INTERNAL_UNIPHY1
[ 5.847993] [drm] Connector 1:
[ 5.847993] [drm] DVI-I-1
[ 5.847993] [drm] HPD4
[ 5.847993] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 5.847993] [drm] Encoders:
[ 5.847993] [drm] DFP2: INTERNAL_UNIPHY
[ 5.847993] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.847993] [drm] Connector 2:
[ 5.847993] [drm] VGA-1
[ 5.847993] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 5.847993] [drm] Encoders:
[ 5.847993] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 5.907992] radeondrmkmsfb0 at radeon0
[ 5.907992] [drm] Initialized radeon 2.50.0 20080528 for radeon0 on minor 0
[ 5.907992] radeondrmkmsfb0: framebuffer at 0xe034d000, size 1920x1080, depth 32, stride 7680
[ 5.907992] no data for est. mode 640x480x67
[ 5.927993] wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[ 5.927993] wsmux1: connecting to wsdisplay0
[ 16.667973] uid 0, pid 494, command master, on /: file system full
[ 95.797829] uid 0, pid 1847, command makemandb, on /: file system full
>How-To-Repeat:
s/a
>Fix:
n/a
Home |
Main Index |
Thread Index |
Old Index