port-i386/59585: pms0 gets out of sync and resets

[cp%rural-networks.com@localhost]

>Number:         59585
>Category:       port-i386
>Synopsis:       pms0 gets out of sync and resets
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Aug 10 16:55:00 +0000 2025
>Originator:     Christophe Prévotaux
>Release:        NetBSD 10.1
>Organization:
NetBSD
>Environment:
NetBSD zippy 10.1 NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024  mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC i386

>Description:
# dmesg | grep pms0

[     1.005228] pms0 at pckbc1 (aux slot)
[     1.005228] pms0: Synaptics touchpad version 6.2
[     1.005228] pms0: Up/down buttons, Palm detect, Multi-finger
[     1.005228] wsmouse0 at pms0 mux 0
[  3604.508932] pms0: pms_synaptics_input: 0x98 out of sync
[  3604.508932] pms0: pms_synaptics_input: 0x73 out of sync
[  3604.508932] pms0: pms_synaptics_input: 0x1a out of sync
[  3604.508932] pms0: pms_synaptics_input: 0xd8 out of sync
[  3604.508932] pms0: pms_synaptics_input: 0x34 out of sync
[  3604.508932] pms0: pms_synaptics_input: 0x1f out of sync
[  3604.518933] pms0: pms_synaptics_input: dropped in relative mode, reset
[  3605.018931] pms0: pms_synaptics_input: 0x98 out of sync
[  3605.018931] pms0: pms_synaptics_input: 0x6f out of sync
[  3605.018931] pms0: pms_synaptics_input: 0x37 out of sync
[  3605.018931] pms0: pms_synaptics_input: 0xc8 out of sync
[  3605.028932] pms0: pms_synaptics_input: dropped in relative mode, reset


Full dmesg

# dmesg
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[     1.000000]     2024
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[     1.000000] 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC
[     1.000000] total memory = 1022 MB
[     1.000000] avail memory = 979 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[     1.000004] mainbus0 (root)
[     1.000004] ACPI: RSDP 0x00000000000F6BA0 000014 (v00 PTLTD )
[     1.000004] ACPI: RSDT 0x000000003FE8FA3C 000040 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[     1.000004] ACPI: FACP 0x000000003FE99E20 000074 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[     1.000004] ACPI: DSDT 0x000000003FE903F8 009A28 (v01 INTEL  CALISTGA 06040000 MSFT 02000002)
[     1.000004] ACPI: FACS 0x000000003FE9AFC0 000040
[     1.000004] ACPI: APIC 0x000000003FE99E94 000068 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[     1.000004] ACPI: HPET 0x000000003FE99EFC 000038 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[     1.000004] ACPI: MCFG 0x000000003FE99F34 00003C (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[     1.000004] ACPI: APIC 0x000000003FE99F70 000068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[     1.000004] ACPI: BOOT 0x000000003FE99FD8 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[     1.000004] ACPI: SSDT 0x000000003FE8FA7C 0004F6 (v01 PmRef  CpuPm    00003000 INTL 20050624)
[     1.000004] ACPI: 2 ACPI AML tables successfully acquired and loaded
[     1.000004] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - Z006 (20221020/dspkginit-497)
[     1.000004] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - Z006 (20221020/dspkginit-497)
[     1.000004] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - Z006 (20221020/dspkginit-497)
[     1.000004] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - Z006 (20221020/dspkginit-497)
[     1.000004] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
[     1.000004] cpu0 at mainbus0 apid 0
[     1.000004] cpu0: Use lfence to serialize rdtsc
[     1.000004] cpu0: Genuine Intel(R) CPU           T2300  @ 1.66GHz, id 0x6e8
[     1.000004] cpu0: node 0, package 0, core 0, smt 0
[     1.000004] cpu1 at mainbus0 apid 1
[     1.000004] cpu1: Genuine Intel(R) CPU           T2300  @ 1.66GHz, id 0x6e8
[     1.000004] cpu1: node 0, package 0, core 1, smt 0
[     1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[     1.000004] acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
[     1.000004] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0x00000000C2D5DAC4 0001A8 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0x00000000C2D68404 0001D0 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0x00000000C2D87644 000089 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0x00000000C2D87704 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[     1.000004] acpi0: SCI interrupting at int 9
[     1.000004] acpi0: fixed power button present
[     1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[     1.005057] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[     1.005057] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[     1.005228] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
[     1.005228] MATH (PNP0C04) at acpi0 not configured
[     1.005228] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
[     1.005228] FIR (SMCF010) at acpi0 not configured
[     1.005228] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
[     1.005228] pckbc2 at acpi0 (PS2M, SYN1003) (aux port): irq 12
[     1.005228] acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
[     1.005228] acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
[     1.005228] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[     1.005228] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[     1.005228] acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[     1.005228] acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
[     1.005228] acpiwmibus at acpiwmi0 not configured
[     1.005228] acpitz0 at acpi0 (THRM): cpu0
[     1.005228] acpitz0: levels: critical 97.0 C, passive 93.0 C, passive cooling
[     1.005228] apm0 at acpi0: Power Management spec V1.2
[     1.005228] ACPI: Enabled 5 GPEs in block 00 to 1F
[     1.005228] pckbd0 at pckbc1 (kbd slot)
[     1.005228] pckbc1: using irq 1 for kbd slot
[     1.005228] wskbd0 at pckbd0: console keyboard
[     1.005228] pms0 at pckbc1 (aux slot)
[     1.005228] pms0: Synaptics touchpad version 6.2
[     1.005228] pms0: Up/down buttons, Palm detect, Multi-finger
[     1.005228] pckbc1: using irq 12 for aux slot
[     1.005228] wsmouse0 at pms0 mux 0
[     1.005228] pci0 at mainbus0 bus 0: configuration mode 1
[     1.005228] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.005228] pchb0 at pci0 dev 0 function 0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
[     1.005228] agp0 at pchb0autoconfiguration error: : can't find internal VGA config space
[     1.005228] ppb0 at pci0 dev 1 function 0: Intel product 27a1 (rev. 0x03)
[     1.005228] ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
[     1.005228] pci1 at ppb0 bus 1
[     1.005228] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.005228] radeon0 at pci1 dev 0 function 0: ATI Technologies Mobility Radeon X1400 (rev. 0x00)
[     1.005228] radeon0: autoconfiguration error: unable to reserve VGA registers for i386 radeondrmkms hack
[     1.005228] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[     1.005228] hdaudio0: interrupting at msi0 vec 0
[     1.005228] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[     1.005228] hdafg0 at hdaudio0: Realtek ALC883
[     1.005228] hdafg0: DAC00 4ch: Speaker [Jack], SPDIF Out [Built-In]
[     1.005228] hdafg0: ADC01 2ch: Line In [Jack] [Built-In], Mic In [Jack]
[     1.005228] hdafg0: 4ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[     1.005228] audio0 at hdafg0: playback, capture, full duplex, independent
[     1.005228] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[     1.005228] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[     1.005228] hdvsmfg at hdaudio0 not configured
[     1.005228] ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
[     1.005228] ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.005228] pci2 at ppb1 bus 2
[     1.005228] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.005228] ppb2 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02)
[     1.005228] ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.005228] pci3 at ppb2 bus 3
[     1.005228] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.005228] wpi0 at pci3 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (rev. 0x02)
[     1.005228] wpi0: interrupting at msi1 vec 0
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: $9<2147483615><2147483586>wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] , address 00:00:00:00:00:00
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] wpi0: autoconfiguration error: could not read EEPROM
[     1.005228] ppb3 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02)
[     1.005228] ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.005228] pci4 at ppb3 bus 4
[     1.005228] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.005228] bge0 at pci4 dev 0 function 0: Broadcom BCM5789 Gigabit Ethernet
[     1.005228] bge0: autoconfiguration error: can't find mem space
[     1.005228] ppb4 at pci0 dev 28 function 3: Intel 82801GB/GR PCI Express Port #4 (rev. 0x02)
[     1.005228] ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.005228] pci5 at ppb4 bus 5
[     1.005228] pci5: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.005228] uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
[     1.005228] uhci0: interrupting at ioapic0 pin 23
[     1.005228] usb0 at uhci0: USB revision 1.0
[     1.005228] uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
[     1.005228] uhci1: interrupting at ioapic0 pin 19
[     1.005228] usb1 at uhci1: USB revision 1.0
[     1.005228] uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
[     1.005228] uhci2: interrupting at ioapic0 pin 18
[     1.005228] usb2 at uhci2: USB revision 1.0
[     1.005228] uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
[     1.005228] uhci3: interrupting at ioapic0 pin 16
[     1.005228] usb3 at uhci3: USB revision 1.0
[     1.005228] ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02)
[     1.005228] ehci0: 64-bit DMA - limited
[     1.005228] ehci0: interrupting at ioapic0 pin 23
[     1.005228] ehci0: EHCI version 1.0
[     1.005228] ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
[     1.005228] ehci0: Using DMA subregion for control data structures
[     1.005228] usb4 at ehci0: USB revision 2.0
[     1.005228] ppb5 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
[     1.005228] pci6 at ppb5 bus 10
[     1.005228] pci6: i/o space, memory space enabled
[     1.005228] cbb0 at pci6 dev 9 function 0: Texas Instruments PCIXX12 Cardbus Controller (rev. 0x00)
[     1.005228] fwohci0 at pci6 dev 9 function 1: Texas Instruments PCIXX12 IEEE 1394 Host Controller (rev. 0x00)
[     1.005228] fwohci0: interrupting at ioapic0 pin 20
[     1.005228] fwohci0: OHCI version 1.10 (ROM=1)
[     1.005228] fwohci0: No. of Isochronous channels is 4.
[     1.005228] fwohci0: EUI64 00:c0:9f:00:00:91:28:0f
[     1.005228] fwohci0: Phy 1394a available S400, 3 ports.
[     1.005228] fwohci0: Link S400, max_rec 2048 bytes.
[     1.005228] ieee1394if0 at fwohci0: IEEE1394 bus
[     1.005228] fwip0 at ieee1394if0: IP over IEEE1394
[     1.005228] fwohci0: Initiate bus reset
[     1.005228] fwohci0: Clear PME# now
[     1.005228] Texas Instruments PCIXX12 Integrated FlashMedia Controller (miscellaneous mass storage) at pci6 dev 9 function 2 not configured
[     1.005228] cbb0: cacheline 0x10 lattimer 0x30
[     1.005228] cbb0: bhlc 0x823010
[     1.005228] cbb0: interrupting at ioapic0 pin 20
[     1.005228] cardslot0 at cbb0
[     1.005228] cardbus0 at cardslot0: bus 11
[     1.005228] pcmcia0 at cardslot0
[     1.005228] ichlpcib0 at pci0 dev 31 function 0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
[     1.005228] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
[     1.005228] ichlpcib0: 24-bit timer
[     1.005228] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[     1.005228] tco0: Min/Max interval 1/367 seconds
[     1.005228] piixide0 at pci0 dev 31 function 2: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
[     1.005228] piixide0: bus-master DMA support present
[     1.005228] piixide0: primary channel wired to compatibility mode
[     1.005228] piixide0: primary channel interrupting at ioapic0 pin 14
[     1.005228] atabus0 at piixide0 channel 0
[     1.005228] piixide0: secondary channel wired to compatibility mode
[     1.005228] piixide0: secondary channel interrupting at ioapic0 pin 15
[     1.005228] atabus1 at piixide0 channel 1
[     1.005228] ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x02)
[     1.005228] ichsmb0: interrupting at ioapic0 pin 19
[     1.005228] iic0 at ichsmb0: I2C bus
[     1.005228] isa0 at ichlpcib0
[     1.005228] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
[     1.005228] pcppi0 at isa0 port 0x61
[     1.005228] midi0 at pcppi0: PC speaker
[     1.005228] sysbeep0 at pcppi0
[     1.005228] attimer1: attached to pcppi0
[     1.005228] acpicpu0 at cpu0: ACPI CPU
[     1.005228] acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
[     1.005228] acpicpu0: C2: I/O, lat   1 us, pow   500 mW
[     1.005228] acpicpu0: C3: I/O, lat  57 us, pow   100 mW
[     1.005228] acpicpu0: P0: FFH, lat  10 us, pow 31000 mW, 1667 MHz
[     1.005228] acpicpu0: P1: FFH, lat  10 us, pow 22000 mW, 1333 MHz
[     1.005228] acpicpu0: P2: FFH, lat  10 us, pow 13000 mW, 1000 MHz
[     1.005228] acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
[     1.005228] acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
[     1.005228] acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
[     1.005228] acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
[     1.005228] acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
[     1.005228] acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
[     1.005228] acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
[     1.005228] acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
[     1.005228] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[     1.005228] acpicpu1 at cpu1: ACPI CPU
[     1.005228] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
[     1.005228] fwohci0: BUS reset
[     1.005228] fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
[     1.005228] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
[     1.005228] ieee1394if0: bus manager 0
[     1.005228] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.005228] acpiacad0: AC adapter online.
[     1.425333] IPsec: Initialized Security Association Processing.
[     1.435421] uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.435421] uhub0: 2 ports with 2 removable, self powered
[     1.435421] uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.435421] uhub1: 2 ports with 2 removable, self powered
[     1.435421] uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.435421] uhub2: 2 ports with 2 removable, self powered
[     1.435421] uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.435421] uhub3: 2 ports with 2 removable, self powered
[     1.435421] uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     1.435421] uhub4: 8 ports with 8 removable, self powered
[     2.505426] axen0 at uhub4 port 3
[     2.505426] axen0: ASIX Elec. Corp. (0x0b95) AX88179 (0x1790), rev 2.10/1.00, addr 2
[     2.945425] axen0: AX88179
[     2.945425] rgephy0 at axen0 phy 3: RTL8211E 1000BASE-T media interface
[     2.965426] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
[     2.965426] axen0: Ethernet address 34:3d:c4:9a:f1:67
[     3.175426] acpibat0: SONY LION rechargeable battery
[     3.175426] acpibat0: granularity: low->warn 0.032 Ah, warn->full 0.032 Ah
[     4.075424] ugen0 at uhub4 port 8
[     4.075424] ugen0: OEM (0x046d) Camera (0x0892), rev 2.00/1.00, addr 3
[     4.505423] wd0 at atabus0 drive 0
[     4.505423] wd0: <WDC WD1200BEVS-60UST0>
[     4.505423] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[     4.505423] wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
[     4.565423] wd0: GPT GUID: 79fdcf1f-bdb0-49ec-b2fa-2f439aec4c13
[     4.575423] dk0 at wd0: "f02e959a-32d0-428d-bb66-b2d24c6e718a", 232346432 blocks at 64, type: ffs
[     4.575423] dk1 at wd0: "c383d3ca-0dca-4252-8b8e-e14a86dee1a3", 2095104 blocks at 232346496, type: swap
[     4.575423] wd0: 32-bit data port
[     4.575423] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[     4.575423] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
[     4.575423] atapibus0 at atabus1: 2 targets
[     4.585423] cd0 at atapibus0 drive 0: <PIONEER DVD-RW DVR-K06RS, FCDL011924WL, 1.01> cdrom removable
[     4.605423] cd0: 32-bit data port
[     4.615422] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[     4.615422] cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
[     4.615422] swwdog0: software watchdog initialized
[     4.655422] WARNING: 18 errors while detecting hardware; check system log.
[     4.655422] boot device: wd0
[     4.655422] root on dk0 dumps on dk1
[     4.695423] root file system type: ffs
[     4.695423] kern.module.path=/stand/i386/10.1/modules
[     4.695423] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x1025:0x0094 0x00).
[     4.695423] [drm] register mmio base: 0xc8100000
[     4.695423] [drm] register mmio size: 65536
[     4.702113] ATOM BIOS: M54P
[     4.702113] [drm] Generation 2 PCI interface, using max accessible memory
[     4.702113] radeon0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used)
[     4.702113] radeon0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF
[     4.705423] [drm] Detected VRAM RAM=80M, BAR=128M
[     4.705423] [drm] RAM width 64bits DDR
[     4.705423] Zone  kernel: Available graphics memory: 277564 KiB
[     4.705423] [drm] radeon: 128M of VRAM memory ready
[     4.705423] [drm] radeon: 512M of GTT memory ready.
[     4.705423] [drm] GART: num cpu pages 131072, num gpu pages 131072
[     4.705423] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[     4.715422] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[     4.715422] radeon0: WB enabled
[     4.715422] radeon0: fence driver on ring 0 use gpu addr 0x0000000008000000 and cpu addr 0x0xdb5fe000
[     4.715422] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[     4.715422] [drm] Driver supports precise vblank timestamp query.
[     4.715422] radeon0: radeon: MSI limited to 32-bit
[     4.715422] radeon0: interrupting at ioapic0 pin 16 (radeon0)
[     4.715422] [drm] radeon: irq initialized.
[     4.715422] [drm] Loading R500 Microcode
[     4.745422] [drm] radeon: ring at 0x0000000008001000
[     4.745422] [drm] ring test succeeded in 7 usecs
[     4.745422] [drm] ib test succeeded in 0 usecs
[     4.745422] [drm] Radeon Display Connectors
[     4.745422] [drm] Connector 0:
[     4.745422] [drm]   VGA-1
[     4.745422] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[     4.745422] [drm]   Encoders:
[     4.745422] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[     4.755427] [drm] Connector 1:
[     4.755427] [drm]   LVDS-1
[     4.755427] [drm]   DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
[     4.755427] [drm]   Encoders:
[     4.755427] [drm]     LCD1: INTERNAL_LVTM1
[     4.755427] [drm] Connector 2:
[     4.755427] [drm]   SVIDEO-1
[     4.755427] [drm]   Encoders:
[     4.755427] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[     4.755427] [drm] Connector 3:
[     4.755427] [drm]   DVI-I-1
[     4.755427] [drm]   HPD1
[     4.755427] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[     4.755427] [drm]   Encoders:
[     4.755427] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[     5.145421] radeondrmkmsfb0 at radeon0
[     5.145421] [drm] Initialized radeon 2.50.0 20080528 for radeon0 on minor 0
[     5.155421] radeondrmkmsfb0: framebuffer at 0xd00c0000, size 1280x800, depth 32, stride 5120
[     5.875420] wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[     5.895420] wsmux1: connecting to wsdisplay0
[    31.535375] acpibat0: state changed on 'charge state' to 'WARNING'
[    73.305298] wsdisplay0: screen 1 added (default, vt100 emulation)
[    73.305298] wsdisplay0: screen 2 added (default, vt100 emulation)
[    73.315300] wsdisplay0: screen 3 added (default, vt100 emulation)
[    73.315300] wsdisplay0: screen 4 added (default, vt100 emulation)
[  1861.972074] wpi0: autoconfiguration error: timeout waiting for master
[  1862.022074] wpi0: autoconfiguration error: timeout waiting for NIC to power up
[  1863.252071] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  1864.252069] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  1864.252069] wpi0: autoconfiguration error: timeout waiting for master
[  1864.252069] wpi0: cannot assign link-local address
[  1864.262070] wpi0: autoconfiguration error: timeout waiting for master
[  1864.312069] wpi0: autoconfiguration error: timeout waiting for NIC to power up
[  1865.312067] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  1866.312066] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  1866.312066] wpi0: autoconfiguration error: timeout waiting for master
[  1866.322066] wpi0: autoconfiguration error: timeout waiting for master
[  1866.372065] wpi0: autoconfiguration error: timeout waiting for NIC to power up
[  1867.372064] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  1868.372062] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  1868.372062] wpi0: autoconfiguration error: timeout waiting for master
[  1868.372062] wpi0: cannot assign link-local address
[  2460.880994] wpi0: autoconfiguration error: timeout waiting for master
[  2460.930993] wpi0: autoconfiguration error: timeout waiting for NIC to power up
[  2461.920992] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  2462.920990] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  2462.920990] wpi0: autoconfiguration error: timeout waiting for master
[  2462.920990] wpi0: cannot assign link-local address
[  2462.930990] wpi0: autoconfiguration error: timeout waiting for master
[  2462.980990] wpi0: autoconfiguration error: timeout waiting for NIC to power up
[  2463.980988] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  2464.980986] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  2464.980986] wpi0: autoconfiguration error: timeout waiting for master
[  2464.990986] wpi0: autoconfiguration error: timeout waiting for master
[  2465.040986] wpi0: autoconfiguration error: timeout waiting for NIC to power up
[  2466.040984] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  2467.040983] wpi0: autoconfiguration error: timeout waiting for adapter to initialize
[  2467.040983] wpi0: autoconfiguration error: timeout waiting for master
[  2467.040983] wpi0: cannot assign link-local address
[  3604.508932] pms0: pms_synaptics_input: 0x98 out of sync
[  3604.508932] pms0: pms_synaptics_input: 0x73 out of sync
[  3604.508932] pms0: pms_synaptics_input: 0x1a out of sync
[  3604.508932] pms0: pms_synaptics_input: 0xd8 out of sync
[  3604.508932] pms0: pms_synaptics_input: 0x34 out of sync
[  3604.508932] pms0: pms_synaptics_input: 0x1f out of sync
[  3604.518933] pms0: pms_synaptics_input: dropped in relative mode, reset
[  3605.018931] pms0: pms_synaptics_input: 0x98 out of sync
[  3605.018931] pms0: pms_synaptics_input: 0x6f out of sync
[  3605.018931] pms0: pms_synaptics_input: 0x37 out of sync
[  3605.018931] pms0: pms_synaptics_input: 0xc8 out of sync
[  3605.028932] pms0: pms_synaptics_input: dropped in relative mode, reset


# dmidecode
# dmidecode 3.5
# SMBIOS entry point at 0x000f6be0
Found SMBIOS entry point in EFI, reading table from /dev/smbios.
SMBIOS 2.4 present.
34 structures occupying 1113 bytes.
Table at 0x000DF810.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
	Vendor: Acer   
	Version: v1.3221
	Release Date: 02/24/06
	Address: 0xE7BE0
	Runtime Size: 99360 bytes
	ROM Size: 512 kB
	Characteristics:
		ISA is supported
		PCI is supported
		PC Card (PCMCIA) is supported
		PNP is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		ESCD support is available
		Boot from CD is supported
		ACPI is supported
		USB legacy is supported
		BIOS boot specification is supported

Handle 0x0001, DMI type 1, 27 bytes
System Information
	Manufacturer: Acer, inc.
	Product Name: Aspire 5670     
	Version: Not Applicable
	Serial Number: LXAA7051436120F0F0EM14
	UUID: 00291ff7-0adb-d811-aab0-001636363a1c
	Wake-up Type: Power Switch
	SKU Number: Not Specified
	Family: Not Specified

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
	Manufacturer: Acer, Inc.
	Product Name: Bodensee        
	Version: Not Applicable
	Serial Number: LXAA7051436120F0F0EM14

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
	Manufacturer:     , Inc.
	Type: Other
	Lock: Not Present
	Version: N/A
	Serial Number: None
	Asset Tag:                                  
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Safe
	Security Status: None
	OEM Information: 0x00001234

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
	Socket Designation: U2E1
	Type: Central Processor
	Family: Other
	Manufacturer: Intel
	ID: E8 06 00 00 FF FB E9 BF
	Version: Genuine Intel(R) CPU           T2
	Voltage: 3.3 V
	External Clock: 166 MHz
	Max Speed: 1600 MHz
	Current Speed: 1600 MHz
	Status: Populated, Enabled
	Upgrade: ZIF Socket
	L1 Cache Handle: 0x0005
	L2 Cache Handle: 0x0006
	L3 Cache Handle: Not Provided
	Serial Number: Not Specified
	Asset Tag: Not Specified
	Part Number: Not Specified

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
	Socket Designation: L1 Cache
	Configuration: Enabled, Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 16 kB
	Maximum Size: 16 kB
	Supported SRAM Types:
		Burst
		Pipeline Burst
		Asynchronous
	Installed SRAM Type: Asynchronous
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
	Socket Designation: L2 Cache
	Configuration: Enabled, Socketed, Level 2
	Operational Mode: Write Back
	Location: External
	Installed Size: 2 MB
	Maximum Size: 512 kB
	Supported SRAM Types:
		Burst
		Pipeline Burst
		Asynchronous
	Installed SRAM Type: Burst
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J19
	Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
	External Reference Designator: COM 1
	External Connector Type: DB-9 male
	Port Type: Serial Port 16550A Compatible

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J23
	Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
	External Reference Designator: Parallel
	External Connector Type: DB-25 female
	Port Type: Parallel Port ECP/EPP

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J11
	Internal Connector Type: None
	External Reference Designator: Keyboard
	External Connector Type: Circular DIN-8 male
	Port Type: Keyboard Port

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: J12
	Internal Connector Type: None
	External Reference Designator: PS/2 Mouse
	External Connector Type: Circular DIN-8 male
	Port Type: Keyboard Port

Handle 0x000B, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI Slot J11
	Type: 32-bit PCI
	Current Usage: Unknown
	Length: Long
	ID: 0
	Characteristics:
		5.0 V is provided
		3.3 V is provided

Handle 0x000C, DMI type 10, 6 bytes
On Board Device Information
	Type: Sound
	Status: Disabled
	Description: HD-Audio

Handle 0x000D, DMI type 11, 5 bytes
OEM Strings
	String 1: This is the Intel Calistoga
	String 2: Chipset CRB Platform

Handle 0x000E, DMI type 12, 5 bytes
System Configuration Options
	Option 1: Jumper settings can be described here.

Handle 0x000F, DMI type 15, 29 bytes
System Event Log
	Area Length: 16 bytes
	Header Start Offset: 0x0000
	Header Length: 16 bytes
	Data Start Offset: 0x0010
	Access Method: General-purpose non-volatile data functions
	Access Address: 0x0000
	Status: Valid, Not Full
	Change Token: 0x00000000
	Header Format: Type 1
	Supported Log Type Descriptors: 3
	Descriptor 1: POST error
	Data Format 1: POST results bitmap
	Descriptor 2: Single-bit ECC memory error
	Data Format 2: Multiple-event
	Descriptor 3: Multi-bit ECC memory error
	Data Format 3: Multiple-event

Handle 0x0010, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 4 GB
	Error Information Handle: Not Provided
	Number Of Devices: 2

Handle 0x0011, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0010
	Error Information Handle: No Error
	Total Width: 32 bits
	Data Width: 32 bits
	Size: 512 MB
	Form Factor: SODIMM
	Set: 1
	Locator: M1
	Bank Locator: Bank 0
	Type: DDR2
	Type Detail: Synchronous
	Speed: Unknown
	Manufacturer: Not Specified
	Serial Number: Not Specified
	Asset Tag: Not Specified
	Part Number: Not Specified

Handle 0x0012, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0010
	Error Information Handle: No Error
	Total Width: 32 bits
	Data Width: 32 bits
	Size: 512 MB
	Form Factor: SODIMM
	Set: 1
	Locator: M2
	Bank Locator: Bank 1
	Type: DDR2
	Type Detail: Synchronous
	Speed: Unknown
	Manufacturer: Not Specified
	Serial Number: Not Specified
	Asset Tag: Not Specified
	Part Number: Not Specified

Handle 0x0013, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0003FFFFFFF
	Range Size: 1 GB
	Physical Array Handle: 0x0010
	Partition Width: 2

Handle 0x0014, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0001FFFFFFF
	Range Size: 512 MB
	Physical Device Handle: 0x0011
	Memory Array Mapped Address Handle: 0x0013
	Partition Row Position: Unknown
	Interleave Position: Unknown
	Interleaved Data Depth: Unknown

Handle 0x0015, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00020000000
	Ending Address: 0x0003FFFFFFF
	Range Size: 512 MB
	Physical Device Handle: 0x0012
	Memory Array Mapped Address Handle: 0x0013
	Partition Row Position: Unknown
	Interleave Position: Unknown
	Interleaved Data Depth: Unknown

Handle 0x0016, DMI type 23, 13 bytes
System Reset
	Status: Enabled
	Watchdog Timer: Present
	Boot Option: Do Not Reboot
	Boot Option On Limit: Do Not Reboot
	Reset Count: Unknown
	Reset Limit: Unknown
	Timer Interval: Unknown
	Timeout: Unknown

Handle 0x0017, DMI type 24, 5 bytes
Hardware Security
	Power-On Password Status: Disabled
	Keyboard Password Status: Unknown
	Administrator Password Status: Disabled
	Front Panel Reset Status: Unknown

Handle 0x0018, DMI type 25, 9 bytes
System Power Controls
	Next Scheduled Power-on: 12-31 23:59:59

Handle 0x0019, DMI type 26, 20 bytes
Voltage Probe
	Description: Voltage Probe
	Location: Processor
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000

Handle 0x001A, DMI type 27, 12 bytes
Cooling Device
	Temperature Probe Handle: 0x001B
	Type: Fan
	Status: OK
	OEM-specific Information: 0x00000000

Handle 0x001B, DMI type 28, 20 bytes
Temperature Probe
	Description: Temperature Probe
	Location: Processor
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000

Handle 0x001C, DMI type 29, 20 bytes
Electrical Current Probe
	Description: Electrical Current Probe
	Location: Processor
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000

Handle 0x001D, DMI type 30, 6 bytes
Out-of-band Remote Access
	Manufacturer Name: Intel
	Inbound Connection: Enabled
	Outbound Connection: Disabled

Handle 0x001E, DMI type 32, 20 bytes
System Boot Information
	Status: <OUT OF SPEC>

Handle 0x001F, DMI type 129, 16 bytes
OEM-specific Type
	Header and Data:
		81 10 1F 00 01 01 02 01 00 00 00 01 00 00 08 01
	Strings:
		Intel_ASF_001
		Intel_ASF_001

Handle 0x0020, DMI type 136, 8 bytes
OEM-specific Type
	Header and Data:
		88 08 20 00 FF FF 00 00
	Strings:
		..!

Handle 0x0021, DMI type 127, 4 bytes
End Of Table

>How-To-Repeat:
Just start machine and start X then mouse mouse with synaptic pad or click synaptic pad buttons.
>Fix: