NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: port-amd64/59434 (Unable to install NetBSD on Samsung Flash NP530XBB)



The following reply was made to PR port-amd64/59434; it has been noted by GNATS.

From: =?UTF-8?Q?Hudson_Dalpr=C3=A1?= <hudson%bduncanltd.com@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: port-amd64-maintainer%netbsd.org@localhost, gnats-admin%netbsd.org@localhost, 
	netbsd-bugs%netbsd.org@localhost
Subject: Re: port-amd64/59434 (Unable to install NetBSD on Samsung Flash NP530XBB)
Date: Wed, 21 May 2025 07:54:01 +1200

 > This sounds like an interrupt issue
 
 How can I provide more information?
 
 > Do you have a serial console on that device?
 > Any other option to save the output of the "dmesg" command and post
 > it here?
 > Does that hardware have other USB ports that you could try or maybe you
 > could try a USB 2 Hub and connect the USB stick to that HUB?
 
 I can plug a USB 2 Hub and repeat the installation to capture the "dmesg".
 But I don't know how to do it. Is there any documentation I can follow?
 
 > If the error comes from ld0, the installation goes to the "disk",
 > which is either a UFS card (no idea how that works) or a regular
 > SD card. Then we probably lack a quirk for the controller.
 
 The Samsung Flash NP530XBB has 64 GB e.MMC as a hard drive, maybe that
 is useful information?
 
 > There are instructions to add a M.2 SATA (not NVME) card as an
 > internal disk. This might be an option.
 
 Unfortunately, I have no budget for hardware modifications.
 I would like to install NetBSD as it is, if possible.
 


Home | Main Index | Thread Index | Old Index