NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Acer Aspire One d255E touchpad button tapping
Hello,
I do not have button tapping on the touchpad. I found this lines in
dmesg related to touchpad:
dmesg:
[ 1,042003] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 1,042003] pckbd0 at pckbc1 (kbd slot)
[ 1,042003] pckbc1: using irq 1 for kbd slot
[ 1,042003] wskbd0 at pckbd0: console keyboard
[ 1,042003] pms0 at pckbc1 (aux slot)
[ 1,042003] pms0: Elantech touchpad version 20.0 (140200)
[ 1,042003] pckbc1: using irq 12 for aux slot
[ 1,042003] wsmouse0 at pms0 mux 0[ 1465.991] ABI class: X.Org
xorg log:
XInput driver, version 24.4
[ 1465.991] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 1465.991] (**) /dev/wsmouse: always reports core events
[ 1465.991] (II) /dev/wsmouse: debuglevel 0
[ 1465.991] (**) /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 1465.991] (**) /dev/wsmouse associated screen: 0
[ 1465.991] (**) Option "Device" "/dev/wsmouse"
[ 1465.997] (II) /dev/wsmouse minimum x position: 0
[ 1465.997] (II) /dev/wsmouse maximum x position: 1023
[ 1465.997] (II) /dev/wsmouse minimum y position: 0
[ 1465.998] (II) /dev/wsmouse maximum y position: 599
[ 1465.998] (**) /dev/wsmouse: Buttons: 5
[ 1466.002] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 7)
[ 1466.008] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 1466.008] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 1466.008] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 1466.008] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 1469.990] (II) intel(0): EDID vendor "CMO", prod id 4120
I am a bit lost about drivers interelationships and where to configure it.
full dmesg and xorg log:
netbsd-acer# dmesg
[ 1,000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003,
[ 1,000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
2012, 2013,
[ 1,000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021,
2022, 2023,
[ 1,000000] 2024
[ 1,000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1,000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1,000000] The Regents of the University of California. All
rights reserved.
[ 1,000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[ 1,000000]
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1,000000] total memory = 2037 MB
[ 1,000000] avail memory = 1942 MB
[ 1,000000] timecounter: Timecounters tick every 10.000 msec
[ 1,000000] Kernelized RAIDframe activated
[ 1,000000] RTC BIOS diagnostic error 0x80<clock_battery>
[ 1,000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1,000004] mainbus0 (root)
[ 1,000004] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 1,000004] ACPI: XSDT 0x000000007F5FE120 000064 (v01 ACRSYS
ACRPRDCT 00000001 01000013)
[ 1,000004] ACPI: FACP 0x000000007F5FD000 0000F4 (v04 ACRSYS
ACRPRDCT 00000001 1025 01000013)
[ 1,000004] ACPI: DSDT 0x000000007F5F1000 008DCF (v01 ACRSYS
ACRPRDCT 00000001 1025 01000013)
[ 1,000004] ACPI: FACS 0x000000007F584000 000040
[ 1,000004] ACPI: HPET 0x000000007F5FC000 000038 (v01 ACRSYS
ACRPRDCT 00000001 1025 01000013)
[ 1,000004] ACPI: APIC 0x000000007F5FB000 000078 (v02 ACRSYS
ACRPRDCT 00000001 1025 01000013)
[ 1,000004] ACPI: MCFG 0x000000007F5FA000 00003C (v01 ACRSYS
ACRPRDCT 00000001 1025 01000013)
[ 1,000004] ACPI: SLIC 0x000000007F5F0000 000176 (v01 ACRSYS
ACRPRDCT 00000001 1025 01000013)
[ 1,000004] ACPI: BOOT 0x000000007F5EF000 000028 (v01 ACRSYS
ACRPRDCT 00000001 1025 01000013)
[ 1,000004] ACPI: SSDT 0x000000007F5ED000 000655 (v01 PmRef CpuPm
00003000 INTL 20051117)
[ 1,000004] ACPI: WDAT 0x000000007F5EC000 000194 (v01 INSYDE INSYDE
00000001 MSFT 01000013)
[ 1,000004] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 1,000004] ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x20,
24 pins
[ 1,000004] cpu0 at mainbus0 apid 0
[ 1,000004] cpu0: Use lfence to serialize rdtsc
[ 1,000004] cpu0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz, id 0x106ca
[ 1,000004] cpu0: node 0, package 0, core 0, smt 0
[ 1,000004] cpu1 at mainbus0 apid 1
[ 1,000004] cpu1: Intel(R) Atom(TM) CPU N455 @ 1.66GHz, id 0x106ca
[ 1,000004] cpu1: node 0, package 0, core 0, smt 1
[ 1,000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1,000004] acpi0: X/RSDT: OemId <ACRSYS,ACRPRDCT,00000001>, AslId <
,01000013>
[ 1,000004] acpi0: MCFG: segment 0, bus 0-255, address
0x00000000e0000000
[ 1,000004] ACPI: Dynamic OEM Table Load:
[ 1,000004] ACPI: SSDT 0xFFFF9D96B93B0008 000708 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 1,000004] ACPI: Dynamic OEM Table Load:
[ 1,000004] ACPI: SSDT 0xFFFF9D96B93B0808 000646 (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 1,000004] ACPI: Dynamic OEM Table Load:
[ 1,000004] ACPI: SSDT 0xFFFF9D96F3DFD348 00015F (v01 PmRef ApIst
00003000 INTL 20051117)
[ 1,000004] ACPI: Dynamic OEM Table Load:
[ 1,000004] ACPI: SSDT 0xFFFF9D96B9319F48 00008D (v01 PmRef ApCst
00003000 INTL 20051117)
[ 1,000004] acpi0: SCI interrupting at int 9
[ 1,000004] acpi0: fixed power button present
[ 1,000004] timecounter: Timecounter "ACPI-Safe" frequency 3579545
Hz quality 900
[ 1,041643] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[ 1,041643] timecounter: Timecounter "hpet0" frequency 14318180 Hz
quality 2000
[ 1,042003] acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
[ 1,042003] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1,042003] acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1,042003] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[ 1,042003] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
[ 1,042003] acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
[ 1,042003] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
[ 1,042003] FWHD (INT0800) at acpi0 not configured
[ 1,042003] pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64
irq 1
[ 1,042003] pckbc2 at acpi0 (MSE0, ETD0500) (aux port): irq 12
[ 1,042003] acpivga0 at acpi0 (OVGA): ACPI Display Adapter
[ 1,042003] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output
Device
[ 1,042003] acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output
Device
[ 1,042003] acpiout1: brightness levels:
[10,20,30,40,50,60,70,80,90,100]
[ 1,042003] acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output
Device
[ 1,042003] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output
Device
[ 1,042003] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output
Device
[ 1,042003] acpivga0: connected output devices:
[ 1,042003] acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
[ 1,042003] acpiwmi0 at acpi0 (WMID, PNP0C14-APGe): ACPI WMI Interface
[ 1,042003] acpiwmibus at acpiwmi0 not configured
[ 1,042003] acpifan0 at acpi0 (FAN, PNP0C0B-0): ACPI Fan
[ 1,042003] acpitz0 at acpi0 (THRM): cpu0
[ 1,042003] acpitz0: active cooling level 0: 70.0C
[ 1,042003] acpitz0: levels: critical 100.0 C, passive 95.0 C
[ 1,042003] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 1,042003] pckbd0 at pckbc1 (kbd slot)
[ 1,042003] pckbc1: using irq 1 for kbd slot
[ 1,042003] wskbd0 at pckbd0: console keyboard
[ 1,042003] pms0 at pckbc1 (aux slot)
[ 1,042003] pms0: Elantech touchpad version 20.0 (140200)
[ 1,042003] pckbc1: using irq 12 for aux slot
[ 1,042003] wsmouse0 at pms0 mux 0
[ 1,042003] pci0 at mainbus0 bus 0: configuration mode 1
[ 1,042003] pci0: i/o space, memory space enabled, rd/line, rd/mult,
wr/inv ok
[ 1,042003] pchb0 at pci0 dev 0 function 0: Intel Pineview Host
Bridge (rev. 0x00)
[ 1,042003] agp0 at pchb0: Pineview chipset
[ 1,042003] agp0: detected 7164k stolen memory
[ 1,042003] agp0: aperture at 0x80000000, size 0x10000000
[ 1,042003] i915drmkms0 at pci0 dev 2 function 0: Intel Pineview
Integrated Graphics Device (rev. 0x00)
[ 1,042003] Intel Pineview Integrated Graphics Device (miscellaneous
display) at pci0 dev 2 function 1 not configured
[ 1,042003] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[ 1,042003] hdaudio0: interrupting at msi0 vec 0
[ 1,042003] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1,042003] hdafg0 at hdaudio0: Realtek ALC272
[ 1,042003] hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
[ 1,042003] hdafg0: ADC01 2ch: Mic In [Built-In]
[ 1,042003] hdafg0: ADC02 2ch: Mic In [Jack]
[ 1,042003] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16
PCM20 PCM24 AC3
[ 1,042003] audio0 at hdafg0: playback, capture, full duplex,
independent
[ 1,042003] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for playback
[ 1,042003] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for recording
[ 1,042003] spkr0 at audio0: PC Speaker (synthesized)
[ 1,042003] wsbell at spkr0 not configured
[ 1,042003] ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI
Express Port #1 (rev. 0x02)
[ 1,042003] ppb0: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1,042003] pci1 at ppb0 bus 1
[ 1,042003] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1,042003] alc0 at pci1 dev 0 function 0: Atheros AR8152 v1.1 PCIe
Fast Ethernet
[ 1,042003] alc0: interrupting at ioapic0 pin 16
[ 1,042003] alc0: Ethernet address 1c:75:08:e0:4a:fb
[ 1,042003] atphy0 at alc0 phy 0: L2 10/100 PHY, rev. 4
[ 1,042003] atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1,042003] ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI
Express Port #2 (rev. 0x02)
[ 1,042003] ppb1: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1,042003] pci2 at ppb1 bus 2
[ 1,042003] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1,042003] athn0 at pci2 dev 0 function 0: Atheros AR9285
[ 1,042003] athn0: rev 2 (1T1R), ROM rev 14, address ec:55:f9:39:23:f1
[ 1,042003] athn0: interrupting at ioapic0 pin 17
[ 1,042003] uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB
UHCI Controller (rev. 0x02)
[ 1,042003] uhci0: interrupting at ioapic0 pin 18
[ 1,042003] usb0 at uhci0: USB revision 1.0
[ 1,042003] uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB
UHCI Controller (rev. 0x02)
[ 1,042003] uhci1: interrupting at ioapic0 pin 20
[ 1,042003] usb1 at uhci1: USB revision 1.0
[ 1,042003] uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB
UHCI Controller (rev. 0x02)
[ 1,042003] uhci2: interrupting at ioapic0 pin 21
[ 1,042003] usb2 at uhci2: USB revision 1.0
[ 1,042003] uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB
UHCI Controller (rev. 0x02)
[ 1,042003] uhci3: interrupting at ioapic0 pin 22
[ 1,042003] usb3 at uhci3: USB revision 1.0
[ 1,042003] ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB
EHCI Controller (rev. 0x02)
[ 1,042003] ehci0: 64-bit DMA
[ 1,042003] ehci0: interrupting at ioapic0 pin 22
[ 1,042003] ehci0: EHCI version 1.0
[ 1,042003] ehci0: 4 companion controllers, 2 ports each: uhci0
uhci1 uhci2 uhci3
[ 1,042003] ehci0: Using DMA subregion for control data structures
[ 1,042003] usb4 at ehci0: USB revision 2.0
[ 1,042003] ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI
Bridge (rev. 0xe2)
[ 1,042003] pci3 at ppb2 bus 5
[ 1,042003] pci3: i/o space, memory space enabled
[ 1,042003] ichlpcib0 at pci0 dev 31 function 0: Intel NM10 Family
LPC Interface Bridge (rev. 0x02)
[ 1,042003] timecounter: Timecounter "ichlpcib0" frequency 3579545
Hz quality 1000
[ 1,042003] ichlpcib0: 24-bit timer
[ 1,042003] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1,042003] tco0: Min/Max interval 1/367 seconds
[ 1,042003] ahcisata0 at pci0 dev 31 function 2: Intel 82801GB/GR
AHCI SATA Controller (rev. 0x02)
[ 1,042003] ahcisata0: 64-bit DMA
[ 1,042003] ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP
0xdf22ff03<PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SMPS,SNCQ,S64A>
[ 1,042003] ahcisata0: interrupting at msi1 vec 0
[ 1,042003] atabus0 at ahcisata0 channel 0
[ 1,042003] atabus1 at ahcisata0 channel 1
[ 1,042003] ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR
SMBus Controller (rev. 0x02)
[ 1,042003] ichsmb0: interrupting at ioapic0 pin 17
[ 1,042003] iic0 at ichsmb0: I2C bus
[ 1,042003] isa0 at ichlpcib0
[ 1,042003] pcppi0 at isa0 port 0x61
[ 1,042003] spkr1 at pcppi0: PC Speaker
[ 1,042003] wsbell at spkr1 not configured
[ 1,042003] midi0 at pcppi0: PC speaker
[ 1,042003] sysbeep0 at pcppi0
[ 1,042003] attimer1: attached to pcppi0
[ 1,042003] acpicpu0 at cpu0: ACPI CPU
[ 1,042003] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1,042003] acpicpu0: C2: FFH, lat 20 us, pow 500 mW
[ 1,042003] acpicpu0: C3: FFH, lat 100 us, pow 100 mW, bus master
check
[ 1,042003] acpicpu0: P0: FFH, lat 10 us, pow 2000 mW, 1666 MHz
[ 1,042003] acpicpu0: P1: FFH, lat 10 us, pow 1300 mW, 1333 MHz
[ 1,042003] acpicpu0: P2: FFH, lat 10 us, pow 600 mW, 1000 MHz
[ 1,042003] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[ 1,042003] acpicpu1 at cpu1: ACPI CPU
[ 1,042003] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[ 1,042003] IPsec: Initialized Security Association Processing.
[ 1,238675] uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000),
class 9/0, rev 1.00/1.00, addr 1
[ 1,238675] uhub0: 2 ports with 2 removable, self powered
[ 1,238675] uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000),
class 9/0, rev 1.00/1.00, addr 1
[ 1,238675] uhub1: 2 ports with 2 removable, self powered
[ 1,238675] uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000),
class 9/0, rev 1.00/1.00, addr 1
[ 1,238675] uhub2: 2 ports with 2 removable, self powered
[ 1,238675] uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000),
class 9/0, rev 1.00/1.00, addr 1
[ 1,238675] uhub3: 2 ports with 2 removable, self powered
[ 1,238675] uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 1
[ 1,238675] uhub4: 8 ports with 8 removable, self powered
[ 1,278674] acpiacad0: AC adapter offline.
[ 1,318674] ahcisata0 port 0: device present, speed: 3.0Gb/s
[ 2,318675] ahcisata0 port 1: PHY offline
[ 2,398674] uvideo0 at uhub4 port 4 configuration 1 interface 0:
Y2B280PSB (0x0402) WebCam (0x7675), rev 2.00/0.04, addr 2
[ 2,398674] video0 at uvideo0: Y2B280PSB (0x0402) WebCam (0x7675),
rev 2.00/0.04, addr 2
[ 2,848674] wd0 at atabus0 drive 0
[ 2,848674] wd0: <KINGSTON SA400S37240G>
[ 2,848674] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
[ 2,848674] wd0: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect
x 468862128 sectors
[ 2,848674] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 2,858676] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 2,858676] swwdog0: software watchdog initialized
[ 2,858676] boot device: wd0
[ 2,858676] root on wd0a dumps on wd0b
[ 2,858676] root file system type: ffs
[ 2,858676] kern.module.path=/stand/amd64/10.1/modules
[ 2,918674] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2,928678] [drm] Driver supports precise vblank timestamp query.
[ 2,928678] WARNING: NVRAM century is 3 but RTC year is 2025
[ 2,931717] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
[ 2,968675] [drm] Initialized overlay support.
[ 2,968675] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on
minor 0
[ 2,988687] intelfb0 at i915drmkms0
[ 2,988687] [drm] DRM_I915_DEBUG enabled
[ 2,988687] [drm] DRM_I915_DEBUG_GEM enabled
[ 2,988687] intelfb0: framebuffer at 0x80009000, size 1024x600,
depth 32, stride 4096
[ 3,768675] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100
emulation), using wskbd0
[ 3,768675] wsmux1: connecting to wsdisplay0
[ 10,078679] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 10,088681] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 10,088681] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 10,088681] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 2679,197862] athn0: autoconfiguration error: device timeout
[ 3920,314843] athn0: autoconfiguration error: device timeout
netbsd-acer#
netbsd-acer#
netbsd-acer# cat /var/log/Xorg.0.log
[ 1465.084]
X.Org X Server 1.21.1.14
X Protocol Version 11, Revision 0
[ 1465.106] Current Operating System: NetBSD netbsd-acer 10.1 NetBSD
10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC amd64
[ 1465.106]
[ 1465.106] Current version of pixman: 0.38.4
[ 1465.106] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1465.106] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1465.108] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 4
11:16:23 2025
[ 1465.109] (II) Loader magic: 0x1f9e697a0
[ 1465.109] (II) Module ABI versions:
[ 1465.109] X.Org ANSI C Emulation: 0.4
[ 1465.109] X.Org Video Driver: 25.2
[ 1465.109] X.Org XInput driver : 24.4
[ 1465.109] X.Org Server Extension : 10.0
[ 1465.127] (--) PCI:*(0@0:2:0) 8086:a011:1025:0349 rev 0, Mem @
0x98180000/524288, 0x80000000/268435456, 0x98000000/1048576, I/O @
0x000060c0/8
[ 1465.127] (--) PCI: (0@0:2:1) 8086:a012:1025:0349 rev 0, Mem @
0x98100000/524288
[ 1465.127] (==) Using default built-in configuration (39 lines)
[ 1465.127] (==) --- Start of built-in configuration ---
[ 1465.127] Section "Device"
[ 1465.127] Identifier "Builtin Default intel Device 0"
[ 1465.127] Driver "intel"
[ 1465.127] EndSection
[ 1465.128] Section "Screen"
[ 1465.128] Identifier "Builtin Default intel Screen 0"
[ 1465.128] Device "Builtin Default intel Device 0"
[ 1465.128] EndSection
[ 1465.128] Section "Device"
[ 1465.128] Identifier "Builtin Default modesetting Device 0"
[ 1465.128] Driver "modesetting"
[ 1465.128] EndSection
[ 1465.128] Section "Screen"
[ 1465.128] Identifier "Builtin Default modesetting Screen 0"
[ 1465.128] Device "Builtin Default modesetting Device 0"
[ 1465.128] EndSection
[ 1465.128] Section "Device"
[ 1465.128] Identifier "Builtin Default vesa Device 0"
[ 1465.128] Driver "vesa"
[ 1465.128] EndSection
[ 1465.128] Section "Screen"
[ 1465.128] Identifier "Builtin Default vesa Screen 0"
[ 1465.128] Device "Builtin Default vesa Device 0"
[ 1465.128] EndSection
[ 1465.129] Section "Device"
[ 1465.129] Identifier "Builtin Default wsfb Device 0"
[ 1465.129] Driver "wsfb"
[ 1465.129] EndSection
[ 1465.129] Section "Screen"
[ 1465.129] Identifier "Builtin Default wsfb Screen 0"
[ 1465.129] Device "Builtin Default wsfb Device 0"
[ 1465.129] EndSection
[ 1465.129] Section "ServerLayout"
[ 1465.129] Identifier "Builtin Default Layout"
[ 1465.129] Screen "Builtin Default intel Screen 0"
[ 1465.129] Screen "Builtin Default modesetting Screen 0"
[ 1465.129] Screen "Builtin Default vesa Screen 0"
[ 1465.129] Screen "Builtin Default wsfb Screen 0"
[ 1465.129] EndSection
[ 1465.129] (==) --- End of built-in configuration ---
[ 1465.130] (==) ServerLayout "Builtin Default Layout"
[ 1465.130] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 1465.130] (**) | |-->Monitor "<default monitor>"
[ 1465.132] (**) | |-->Device "Builtin Default intel Device 0"
[ 1465.132] (==) No monitor specified for screen "Builtin Default intel
Screen 0".
Using a default monitor configuration.
[ 1465.132] (**) |-->Screen "Builtin Default modesetting Screen 0" (1)
[ 1465.132] (**) | |-->Monitor "<default monitor>"
[ 1465.134] (**) | |-->Device "Builtin Default modesetting Device 0"
[ 1465.134] (==) No monitor specified for screen "Builtin Default
modesetting Screen 0".
Using a default monitor configuration.
[ 1465.134] (**) |-->Screen "Builtin Default vesa Screen 0" (2)
[ 1465.134] (**) | |-->Monitor "<default monitor>"
[ 1465.136] (**) | |-->Device "Builtin Default vesa Device 0"
[ 1465.136] (==) No monitor specified for screen "Builtin Default vesa
Screen 0".
Using a default monitor configuration.
[ 1465.136] (**) |-->Screen "Builtin Default wsfb Screen 0" (3)
[ 1465.136] (**) | |-->Monitor "<default monitor>"
[ 1465.138] (**) | |-->Device "Builtin Default wsfb Device 0"
[ 1465.138] (==) No monitor specified for screen "Builtin Default wsfb
Screen 0".
Using a default monitor configuration.
[ 1465.138] (**) Allowing byte-swapped clients
[ 1465.139] (==) Automatically adding devices
[ 1465.139] (==) Automatically enabling devices
[ 1465.139] (==) Not automatically adding GPU devices
[ 1465.139] (==) Automatically binding GPU devices
[ 1465.139] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1465.139] (WW) The directory "/usr/pkg/share/fonts/X11/misc/" does
not exist.
[ 1465.139] Entry deleted from font path.
[ 1465.139] (WW) The directory "/usr/pkg/share/fonts/X11/Type1/" does
not exist.
[ 1465.140] Entry deleted from font path.
[ 1465.140] (WW) The directory "/usr/pkg/share/fonts/X11/75dpi/" does
not exist.
[ 1465.140] Entry deleted from font path.
[ 1465.140] (WW) The directory "/usr/pkg/share/fonts/X11/100dpi/" does
not exist.
[ 1465.140] Entry deleted from font path.
[ 1465.140] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/,
/usr/pkg/share/fonts/X11/TTF/
[ 1465.140] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 1465.140] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 1465.140] (II) LoadModule: "glx"
[ 1465.162] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 1465.163] (II) Module glx: vendor="X.Org Foundation"
[ 1465.163] compiled for 1.21.1.14, module version = 1.0.0
[ 1465.163] ABI class: X.Org Server Extension, version 10.0
[ 1465.163] (II) LoadModule: "intel"
[ 1465.165] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 1465.167] (II) Module intel: vendor="X.Org Foundation"
[ 1465.167] compiled for 1.21.1.14, module version = 2.99.917
[ 1465.167] Module class: X.Org Video Driver
[ 1465.167] ABI class: X.Org Video Driver, version 25.2
[ 1465.167] (II) LoadModule: "modesetting"
[ 1465.169] (II) Loading /usr/X11R7/lib/modules/drivers/modesetting_drv.so
[ 1465.170] (II) Module modesetting: vendor="X.Org Foundation"
[ 1465.170] compiled for 1.21.1.14, module version = 1.21.1
[ 1465.170] Module class: X.Org Video Driver
[ 1465.170] ABI class: X.Org Video Driver, version 25.2
[ 1465.170] (II) LoadModule: "vesa"
[ 1465.173] (II) Loading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[ 1465.173] (II) Module vesa: vendor="X.Org Foundation"
[ 1465.173] compiled for 1.21.1.14, module version = 2.5.0
[ 1465.174] Module class: X.Org Video Driver
[ 1465.174] ABI class: X.Org Video Driver, version 25.2
[ 1465.174] (II) LoadModule: "wsfb"
[ 1465.176] (II) Loading /usr/X11R7/lib/modules/drivers/wsfb_drv.so
[ 1465.177] (II) Module wsfb: vendor="X.Org Foundation"
[ 1465.177] compiled for 1.21.1.14, module version = 0.4.0
[ 1465.177] ABI class: X.Org Video Driver, version 25.2
[ 1465.177] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1465.179] (II) intel: Driver for Intel(R) HD Graphics
[ 1465.179] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 1465.179] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 1465.179] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1465.180] (II) VESA: driver for VESA chipsets: vesa
[ 1465.180] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[ 1465.180] (--) Using wscons driver on /dev/ttyE4 in pcvt
compatibility mode (version 3.32)
[ 1465.180] (--) using VT number 5
[ 1465.204] (WW) Falling back to old probe method for modesetting
[ 1465.204] (WW) Falling back to old probe method for wsfb
[ 1465.204] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[ 1465.205] (II) intel(0): Creating default Display subsection in
Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 1465.205] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1465.205] (==) intel(0): RGB weight 888
[ 1465.205] (==) intel(0): Default visual is TrueColor
[ 1465.205] (--) intel(0): Integrated Graphics Chipset: Intel(R)
Pineview GM
[ 1465.206] (**) intel(0): Relaxed fencing enabled
[ 1465.206] (**) intel(0): Wait on SwapBuffers? enabled
[ 1465.206] (**) intel(0): Triple buffering? enabled
[ 1465.206] (**) intel(0): Framebuffer tiled
[ 1465.206] (**) intel(0): Pixmaps tiled
[ 1465.206] (**) intel(0): 3D buffers tiled
[ 1465.206] (**) intel(0): SwapBuffers wait enabled
[ 1465.206] (==) intel(0): video overlay key set to 0x101fe
[ 1465.207] (II) intel(0): Output LVDS1 has no monitor section
[ 1465.221] (II) intel(0): Output VGA1 has no monitor section
[ 1465.222] (II) intel(0): EDID for output LVDS1
[ 1465.222] (II) intel(0): Manufacturer: CMO Model: 1018 Serial#: 0
[ 1465.222] (II) intel(0): Year: 2009 Week: 51
[ 1465.222] (II) intel(0): EDID Version: 1.3
[ 1465.222] (II) intel(0): Digital Display Input
[ 1465.222] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 12
[ 1465.222] (II) intel(0): Gamma: 2.20
[ 1465.222] (II) intel(0): No DPMS capabilities specified
[ 1465.222] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[ 1465.222] (II) intel(0): First detailed timing is preferred mode
[ 1465.223] (II) intel(0): redX: 0.560 redY: 0.355 greenX: 0.350
greenY: 0.565
[ 1465.223] (II) intel(0): blueX: 0.155 blueY: 0.115 whiteX: 0.313
whiteY: 0.329
[ 1465.223] (II) intel(0): Manufacturer's mask: 0
[ 1465.223] (II) intel(0): Supported detailed timing:
[ 1465.223] (II) intel(0): clock: 54.2 MHz Image Size: 222 x 125 mm
[ 1465.223] (II) intel(0): h_active: 1024 h_sync: 1133 h_sync_end
1205 h_blank_end 1386 h_border: 0
[ 1465.223] (II) intel(0): v_active: 600 v_sync: 607 v_sync_end 620
v_blanking: 652 v_border: 0
[ 1465.223] (II) intel(0): N101L6-L0D
[ 1465.223] (II) intel(0): CMO
[ 1465.223] (II) intel(0): N101L6-L0D
[ 1465.223] (II) intel(0): EDID (in hex):
[ 1465.223] (II) intel(0): 00ffffffffffff000daf181000000000
[ 1465.223] (II) intel(0): 3313010380160c780a4be58f5b599027
[ 1465.224] (II) intel(0): 1d505400000001010101010101010101
[ 1465.224] (II) intel(0): 0101010101012c15006a415834206d48
[ 1465.224] (II) intel(0): 7d00de7d00000018000000fe004e3130
[ 1465.224] (II) intel(0): 314c362d4c30440a2020000000fe0043
[ 1465.224] (II) intel(0): 4d4f0a202020202020202020000000fe
[ 1465.224] (II) intel(0): 004e3130314c362d4c30440a20200047
[ 1465.225] (II) intel(0): Not using default mode "320x240" (doublescan
mode not supported)
[ 1465.225] (II) intel(0): Not using default mode "400x300" (doublescan
mode not supported)
[ 1465.225] (II) intel(0): Not using default mode "400x300" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "512x384" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "640x480" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "640x512" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "800x600" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "700x525" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "320x180" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "320x180" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "360x202" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "360x202" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "432x243" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "432x243" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "480x270" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "480x270" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "512x288" (doublescan
mode not supported)
[ 1465.226] (II) intel(0): Not using default mode "512x288" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "640x360" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "640x360" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "684x384" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "684x384" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "800x450" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "800x450" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "960x540" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "960x540" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "1024x576"
(doublescan mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "1024x576"
(doublescan mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "640x400" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "640x400" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "700x450" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "700x450" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "840x525" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "840x525" (doublescan
mode not supported)
[ 1465.227] (II) intel(0): Not using default mode "960x600" (doublescan
mode not supported)
[ 1465.228] (II) intel(0): Not using default mode "960x600" (doublescan
mode not supported)
[ 1465.228] (II) intel(0): Printing probed modes for output LVDS1
[ 1465.228] (II) intel(0): Modeline "1024x600"x60.0 54.20 1024 1133
1205 1386 600 607 620 652 -hsync -vsync (39.1 kHz eP)
[ 1465.228] (II) intel(0): Modeline "1024x576"x59.9 46.50 1024 1064
1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 1465.228] (II) intel(0): Modeline "1024x576"x59.8 42.00 1024 1072
1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 1465.228] (II) intel(0): Modeline "960x540"x59.6 40.75 960 992
1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 1465.228] (II) intel(0): Modeline "960x540"x59.8 37.25 960 1008
1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 1465.228] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 1465.228] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 1465.228] (II) intel(0): Modeline "864x486"x59.9 32.50 864 888 968
1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 1465.228] (II) intel(0): Modeline "864x486"x59.6 30.50 864 912 944
1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 1465.229] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 1465.229] (II) intel(0): Modeline "720x405"x59.5 22.50 720 744 808
896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 1465.229] (II) intel(0): Modeline "720x405"x59.0 21.75 720 768 800
880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 1465.229] (II) intel(0): Modeline "640x360"x59.8 18.00 640 664 720
800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 1465.229] (II) intel(0): Modeline "640x360"x59.3 17.75 640 688 720
800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 1465.243] (II) intel(0): EDID for output VGA1
[ 1465.243] (II) intel(0): Output LVDS1 connected
[ 1465.243] (II) intel(0): Output VGA1 disconnected
[ 1465.243] (II) intel(0): Using exact sizes for initial modes
[ 1465.243] (II) intel(0): Output LVDS1 using initial mode 1024x600 +0+0
[ 1465.244] (II) intel(0): Kernel page flipping support detected, enabling
[ 1465.244] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1465.244] (==) intel(0): DPI set to (96, 96)
[ 1465.244] (II) Loading sub module "fb"
[ 1465.244] (II) LoadModule: "fb"
[ 1465.244] (II) Module "fb" already built-in
[ 1465.244] (II) Loading sub module "dri2"
[ 1465.244] (II) LoadModule: "dri2"
[ 1465.244] (II) Module "dri2" already built-in
[ 1465.244] (II) UnloadModule: "modesetting"
[ 1465.244] (II) Unloading modesetting
[ 1465.245] (II) UnloadModule: "vesa"
[ 1465.245] (II) Unloading vesa
[ 1465.245] (II) UnloadModule: "wsfb"
[ 1465.245] (II) Unloading wsfb
[ 1465.245] (II) intel(0): Allocated new frame buffer 1024x600 stride
4096, tiled
[ 1465.246] (II) UXA(0): Driver registered support for the following
operations:
[ 1465.246] (II) solid
[ 1465.246] (II) copy
[ 1465.246] (II) composite (RENDER acceleration)
[ 1465.246] (II) put_image
[ 1465.246] (II) get_image
[ 1465.247] (II) intel(0): [DRI2] Setup complete
[ 1465.247] (II) intel(0): [DRI2] DRI driver: i915
[ 1465.247] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 1465.247] (==) intel(0): Backing store enabled
[ 1465.247] (==) intel(0): Silken mouse enabled
[ 1465.247] (II) intel(0): Initializing HW Cursor
[ 1465.248] (==) intel(0): DPMS enabled
[ 1465.248] (==) intel(0): Intel XvMC decoder disabled
[ 1465.248] (II) intel(0): Set up textured video
[ 1465.248] (II) intel(0): Set up overlay video
[ 1465.248] (II) intel(0): DRI2: Enabled
[ 1465.248] (II) intel(0): DRI3: Not available
[ 1465.270] (II) Initializing extension Generic Event Extension
[ 1465.272] (II) Initializing extension SHAPE
[ 1465.274] (II) Initializing extension MIT-SHM
[ 1465.277] (II) Initializing extension XInputExtension
[ 1465.279] (II) Initializing extension XTEST
[ 1465.282] (II) Initializing extension BIG-REQUESTS
[ 1465.284] (II) Initializing extension SYNC
[ 1465.287] (II) Initializing extension XKEYBOARD
[ 1465.289] (II) Initializing extension XC-MISC
[ 1465.291] (II) Initializing extension SECURITY
[ 1465.294] (II) Initializing extension XFIXES
[ 1465.296] (II) Initializing extension XFree86-Bigfont
[ 1465.298] (II) Initializing extension RENDER
[ 1465.301] (II) Initializing extension RANDR
[ 1465.305] (II) Initializing extension COMPOSITE
[ 1465.308] (II) Initializing extension DAMAGE
[ 1465.310] (II) Initializing extension MIT-SCREEN-SAVER
[ 1465.312] (II) Initializing extension DOUBLE-BUFFER
[ 1465.314] (II) Initializing extension RECORD
[ 1465.317] (II) Initializing extension DPMS
[ 1465.319] (II) Initializing extension Present
[ 1465.321] (II) Initializing extension DRI3
[ 1465.321] (II) Initializing extension X-Resource
[ 1465.324] (II) Initializing extension XVideo
[ 1465.326] (II) Initializing extension XVideo-MotionCompensation
[ 1465.326] (II) Initializing extension GLX
[ 1465.342] (II) AIGLX: Loaded and initialized i915
[ 1465.342] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1465.342] (II) Initializing extension XFree86-VidModeExtension
[ 1465.344] (II) Initializing extension XFree86-DGA
[ 1465.347] (II) Initializing extension XFree86-DRI
[ 1465.347] (II) Initializing extension DRI2
[ 1465.350] (II) intel(0): Setting screen physical size to 270 x 158
[ 1465.863] (II) config/wscons: checking input device /dev/wskbd
[ 1465.863] (II) wskbd: using layout es
[ 1465.863] (II) LoadModule: "kbd"
[ 1465.864] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 1465.865] (II) Module kbd: vendor="X.Org Foundation"
[ 1465.865] compiled for 1.21.1.14, module version = 2.0.0
[ 1465.865] Module class: X.Org XInput Driver
[ 1465.865] ABI class: X.Org XInput driver, version 24.4
[ 1465.865] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 1465.865] (**) /dev/wskbd: always reports core events
[ 1465.865] (**) /dev/wskbd: always reports core events
[ 1465.866] (**) Option "Protocol" "standard"
[ 1465.866] (**) Option "XkbRules" "base"
[ 1465.866] (**) Option "XkbModel" "pc105"
[ 1465.866] (**) Option "XkbLayout" "es"
[ 1465.866] (II) XINPUT: Adding extended input device "/dev/wskbd"
(type: KEYBOARD, id 6)
[ 1465.988] (II) config/wscons: checking input device /dev/wsmouse
[ 1465.988] (II) LoadModule: "ws"
[ 1465.990] (II) Loading /usr/X11R7/lib/modules/drivers/ws_drv.so
[ 1465.991] (II) Module ws: vendor="X.Org Foundation"
[ 1465.991] compiled for 1.21.1.14, module version = 1.3.0
[ 1465.991] Module class: X.Org XInput Driver
[ 1465.991] ABI class: X.Org XInput driver, version 24.4
[ 1465.991] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 1465.991] (**) /dev/wsmouse: always reports core events
[ 1465.991] (II) /dev/wsmouse: debuglevel 0
[ 1465.991] (**) /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 1465.991] (**) /dev/wsmouse associated screen: 0
[ 1465.991] (**) Option "Device" "/dev/wsmouse"
[ 1465.997] (II) /dev/wsmouse minimum x position: 0
[ 1465.997] (II) /dev/wsmouse maximum x position: 1023
[ 1465.997] (II) /dev/wsmouse minimum y position: 0
[ 1465.998] (II) /dev/wsmouse maximum y position: 599
[ 1465.998] (**) /dev/wsmouse: Buttons: 5
[ 1466.002] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 7)
[ 1466.008] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 1466.008] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 1466.008] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 1466.008] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 1469.990] (II) intel(0): EDID vendor "CMO", prod id 4120
[ 1469.990] (II) intel(0): Printing DDC gathered Modelines:
[ 1469.990] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1133
1205 1386 600 607 620 652 -hsync -vsync (39.1 kHz eP)
[ 1470.007] (II) intel(0): EDID vendor "CMO", prod id 4120
[ 1470.007] (II) intel(0): Printing DDC gathered Modelines:
[ 1470.007] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1133
1205 1386 600 607 620 652 -hsync -vsync (39.1 kHz eP)
netbsd-acer#
In man ws I cannot see anything related to the mouse button tapping:
NAME
WS - wscons pointer input driver for Xorg on *BSD
SYNOPSIS
Section "InputDevice"
Identifier "name"
Driver "ws"
Option "Buttons" "integer"
Option "Emulate3Buttons" "boolean"
Option "Emulate3Timeout" "integer"
Option "DebugLevel" "integer"
Option "Device" "path"
Option "MinX" "integer"
Option "MaxX" "integer"
Option "MinY" "integer"
Option "MaxY" "integer"
Option "Raw" "boolean"
Option "Rotate" "string"
Option "SwapXY" "boolean"
Option "ZAxisMapping" "N1 N2"
Option "WAxisMapping" "N1 N2"
EndSection
Thanks in advance for your help.
Regards.
Ramiro.
Home |
Main Index |
Thread Index |
Old Index