Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed to boot on J3455-ITX board (ASRock)

["wgstuken%grimme-reitenspezial.de@localhost via gnats" <gnats-admin%NetBSD.org@localhost>]

The following reply was made to PR port-amd64/58982; it has been noted by GNATS.

From: wgstuken%grimme-reitenspezial.de@localhost
To: gnats-bugs%netbsd.org@localhost
Cc: port-amd64-maintainer%netbsd.org@localhost, gnats-admin%netbsd.org@localhost,
 netbsd-bugs%netbsd.org@localhost
Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed to
 boot on J3455-ITX board (ASRock)
Date: Fri, 17 Jan 2025 17:08:19 +0100

 HI again - the relevant Makefile is only once inside the tgz files and 
 it has this block:
 
 # Install include files in ${TOOLDIR}/include/compat
 includes: .PHONY ${HOST_INCINSTDIRS} .WAIT ${HOST_INCINSTFILES}
          @(cd include && find . -name '*.h' -print | while read f ; do \
              ${HOST_INSTALL_FILE} $$f ${HOST_INCSDIR}/compat/$$f ; \
          done)
 
 No .CURDIR used here ....
 
 I tried to compile on NetBSD 7.1 but this runs into compilation 
 problems.
 - first reports that it need -std=gnu99,
 - but setting HOST_CFLAGS='-O -std=gnu99' does not help: next error 
 intptr_t and uintptr_t are unknown types
 -> no way to get to the relevant point on this 7.1 (amd64) system
 
 I have also a try on 9.3 (amd64)  system .
 Here it run through - so same as your test Martin.
 
 But it definitly fails on the i386 system I have setup with 10.1 for 
 compilation.
 I'm currently running release build there to see if it now works (with 
 my .CURDIR patch) - will run for hours if not for days on this slow 
 system.
 I forget to setup network login on it - so console only and that is 
 blocked with release build ....
 
 But I saw some error messages during tools builds under 9.3:
 
 cleandir ===> installboot
 sh: 
 /nsw-data/nsw/ttt-10.1/usr/src/obj/tooldir.NetBSD-9.3-amd64/bin/nbsed: 
 not found
 nbmake[2]: 
 "/nsw-data/nsw/ttt-10.1/usr/src/tools/libprop/../Makefile.nbincludes" 
 line 27: warning: "/nsw-data/nsw/ttt-10.1/usr/src/obj/tooldir.NetBSD-
 9.3-amd64/bin/nbsed -e 's/^#.*//' 
 /nsw-data/nsw/ttt-10.1/usr/src/tools/libprop/../headerlist" returned 
 non-zero status
 
 nbsed is compiled later - this is last message before it is build.
 There are also some (not only a few) messages like this during objdir 
 creation:
 
 obj ===> tools/ctfmerge
 sh: 
 /nsw-data/nsw/ttt-10.1/usr/src/obj/tooldir.NetBSD-9.3-amd64/bin/nbsed: 
 not found
 nbmake[3]: 
 "/nsw-data/nsw/ttt-10.1/usr/src/tools/libctf/../Makefile.nbincludes" 
 line 27: warning: "/nsw-data/nsw/ttt-10.1/usr/src/obj/tooldir.NetBSD-9
 .3-amd64/bin/nbsed -e 's/^#.*//' 
 /nsw-data/nsw/ttt-10.1/usr/src/tools/libctf/../headerlist" returned 
 non-zero status
 
 
 not sure if this hurts, but this is ugly.
 
 As soon as my i386 build is done I will setup network login, create 
 second src-tree and run this under screen with log-file so that you can 
 see that it is failing and also what I have done.
 
 
 
 
 
 Am 17.01.2025 13:30, schrieb wgstuken%grimme-reitenspezial.de@localhost:
 > I have extracted all files - including xsrc
 > I will extract all of them again into different folders - and check
 > the suspect Makefile.
 > It was definitly not working here and when I add ${.CURDIR}/ to the cd
 > command it starts working.
 > 
 > will come back when done new extraction.
 > 
 > 
 > Am 17.01.2025 13:20, schrieb Martin Husemann via gnats:
 >> The following reply was made to PR port-amd64/58982; it has been noted 
 >> by GNATS.
 >> 
 >> From: Martin Husemann <martin%duskware.de@localhost>
 >> To: gnats-bugs%netbsd.org@localhost
 >> Cc:
 >> Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) 
 >> failed to
 >>  boot on J3455-ITX board (ASRock)
 >> Date: Fri, 17 Jan 2025 13:18:36 +0100
 >> 
 >>  On Fri, Jan 17, 2025 at 11:05:01AM +0000,
 >> wgstuken%grimme-reitenspezial.de@localhost via gnats wrote:
 >>  >  I have reinstalled source tree and had a try with './build.sh 
 >> tools'
 >>  >  after everything else was failing before.
 >>  >
 >>  >  But not even this is working !!!!
 >>  >
 >>  >  Has anybody ever build the sources from the tgz files found in
 >>  >  /pub/NetBSD/NetBSD-10.1/source/sets ?
 >> 
 >>  I just tried it and it worked fine. Did you extract all the files?
 >>  I left out xsrc, but you definitively need {share,gnu,sys,}src.tgz.
 >> 
 >>  ===> Summary of results:
 >>           build.sh command:    ./build.sh -U -j 8 tools
 >>           build.sh started:    Fri Jan 17 13:05:17 CET 2025
 >>           NetBSD version:      10.1
 >>           MACHINE:             amd64
 >>           MACHINE_ARCH:        x86_64
 >>           Build platform:      NetBSD 10.99.12 amd64
 >>           HOST_SH:             /bin/sh
 >>           No $TOOLDIR/bin/nbmake, needs building.
 >>           Bootstrapping nbmake
 >>           MAKECONF file:       /etc/mk.conf
 >>           TOOLDIR path:
 >> /tmp/src-10.1/usr/src/obj/tooldir.NetBSD-10.99.12-amd64
 >>           DESTDIR path:        /tmp/src-10.1/usr/src/obj/destdir.amd64
 >>           RELEASEDIR path:     /tmp/src-10.1/usr/src/obj/releasedir
 >>           Created
 >> /tmp/src-10.1/usr/src/obj/tooldir.NetBSD-10.99.12-amd64/bin/nbmake
 >>           Updated makewrapper:
 >> /tmp/src-10.1/usr/src/obj/tooldir.NetBSD-10.99.12-amd64/bin/nbmake-amd64
 >>           Tools built to 
 >> /tmp/src-10.1/usr/src/obj/tooldir.NetBSD-10.99.12-amd64
 >>           build.sh ended:      Fri Jan 17 13:14:11 CET 2025
 >> 
 >>  Martin