NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed to boot on J3455-ITX board (ASRock)
Hi,
I had attached them .....
now as inline copy again:
output of cpuctl identify 0 ...
cpu0: highest basic info 00000015
cpu0: highest extended info 80000008
cpu0: "Intel(R) Celeron(R) CPU J3455 @ 1.50GHz"
cpu0: Intel Atom (Goldmont) (686-class), 1497.60 MHz
cpu0: TSC freq CPUID 1497600000 Hz
cpu0: family 0x6 model 0x5c stepping 0xa (id 0x506ca)
cpu0: features
0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE>
cpu0: features
0xbfebfbff<MCA,CMOV,PAT,PSE36,CLFSH,DS,ACPI,MMX,FXSR,SSE,SSE2>
cpu0: features 0xbfebfbff<SS,HTT,TM,PBE>
cpu0: features1
0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MONITOR,DS-CPL,VMX,EST,TM2>
cpu0: features1
0x4ff8ebbf<SSSE3,SDBG,CX16,xTPR,PDCM,SSE41,SSE42,X2APIC,MOVBE>
cpu0: features1 0x4ff8ebbf<POPCNT,DEADLINE,AES,XSAVE,OSXSAVE,RDRAND>
cpu0: features2 0x2c100800<SYSCALL/SYSRET,XD,P1GB,RDTSCP,EM64T>
cpu0: features3 0x101<LAHF,PREFETCHW>
cpu0: features5
0x2294e283<FSGSBASE,TSCADJUST,SMEP,ERMS,FPUCSDS,MPX,PQE,RDSEED>
cpu0: features5 0x2294e283<SMAP,CLFLUSHOPT,PT,SHA>
cpu0: features7 0xac000400<MD_CLEAR,IBRS,STIBP,ARCH_CAP,SSBD>
cpu0: xsave features 0x1b<x87,SSE,BNDREGS,BNDCSR>
cpu0: xsave instructions 0xf<XSAVEOPT,XSAVEC,XGETBV,XSAVES>
cpu0: xsave area size: current 576, maximum 1088, xgetbv enabled
cpu0: enabled xsave 0x3<x87,SSE>
cpu0: I-cache: 32KB 64B/line 8-way, D-cache: 24KB 64B/line 6-way
cpu0: L2 cache: 1MB 64B/line 16-way
cpu0: ITLB: 48 4KB entries fully associative
cpu0: DTLB: 512 4KB entries 4-way, 32 2M/4M entries
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: Core ID 0
cpu0: SMT ID 0
cpu0: MONITOR/MWAIT extensions 0x3<EMX,IBE>
cpu0: monitor-line size 64
cpu0: C1 substates 2
cpu0: C3 substates 2
cpu0: C4 substates 4
cpu0: C5 substates 2
cpu0: C6 substates 1
cpu0: C7 substates 1
cpu0: DSPM-eax 0x57<DTS,IDA,ARAT,PLN,PTM>
cpu0: DSPM-ecx 0x1<HWF,NTDC=0>
cpu0: SEF highest subleaf 00000000
cpu0: Power Management features: 0x100<ITSC>
cpu0: Perfmon: Ver. 4 <ANYTHREAD>
cpu0: Perfmon: General: bitwidth 48, 4 counters
cpu0: Perfmon: General: avail
0x7f<CORECYCL,INST,REFCYCL,LLCREF,LLCMISS,BRINST>
cpu0: Perfmon: General: avail 0x7f<BRMISPR>
cpu0: Perfmon: Fixed: bitwidth 48, 3 counters
cpu0: Perfmon: Fixed: avail 0x7<INST,CLK_CORETHREAD,CLK_REF_TSC>
cpu0: microcode version 0x1a, platform ID 0
output of /proc/cpuinfo ....
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 92
model name : Intel(R) Celeron(R) CPU J3455 @ 1.50GHz
stepping : 10
cpu MHz : 1497.60
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 21
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
pdpe1gb rdtscp lm pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3
sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer
aes xsave rdrand lahf_lm 3dnowprefetch fsgsbase tsc_adjust smep erms mpx
rdt_a rdseed smap clflushopt intel_pt sha_ni xsaveopt xsavec xgetbv1
xsaves dtherm ida arat pln pts md_clear arch_capabilities ssbd
clflush size : 64
dmesg - contains multiple boot tries last one with success ..
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
2012, 2013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021,
2022, 2023,
[ 1.000000] 2024
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[ 1.000000]
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 16041 MB
[ 1.000000] avail memory = 15488 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.000004] efi: systbl at pa 6dd86018
[ 1.000004] mainbus0 (root)
[ 1.000004] cpu0 at mainbus0
[ 1.000004] ACPI Error: AE_BAD_PARAMETER, Thread 2173218816 could
not acquire Mutex [ACPI_MTX_Tables] (0x2) (20221020/utmutex-326)
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: TSC freq CPUID 1497600000 Hz
[ 1.000004] cpu0: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, id
0x506ca
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.000004] pci0: i/o space, memory space enabled, rd/line, rd/mult,
wr/inv ok
[ 1.000004] pchb0 at pci0 dev 0 function 0: Intel Apollo Lake Host
Bridge (rev. 0x0d)
[ 1.000004] i915drmkms0 at pci0 dev 2 function 0: Intel Apollo Lake
Graphics (12EU) (rev. 0x0d)
[ 1.000004] hdaudio0 at pci0 dev 14 function 0: HD Audio Controller
[ 1.000004] pci_intr_map: bad interrupt line 25
[ 1.000004] cannot set up pci_intr_handle_t
[ 1.000004] hdaudio0: autoconfiguration error: couldn't map
interrupt
[ 1.000004] Intel Apollo Lake TXE HECI1 (miscellaneous
communications, revision 0x0d) at pci0 dev 15 function 0 not configured
[ 1.000004] ahcisata0 at pci0 dev 18 function 0: Intel Apollo Lake
SATA (rev. 0x0d)
[ 1.000004] pci_intr_map: no mapping for pin A (line=ff)
[ 1.000004] cannot set up pci_intr_handle_t
[ 1.000004] ahcisata0: autoconfiguration error: can't allocate
handler
[ 1.000004] ppb0 at pci0 dev 19 function 0: Intel Apollo Lake PCIe
A0 (rev. 0xfd)
[ 1.000004] ppb0: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.000004] ppb0: link is x1 @ 2.5GT/s
[ 1.000004] pci1 at ppb0 bus 1
[ 1.000004] pci1: i/o space, memory space enabled
[ 1.000004] re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe
Gigabit Ethernet (rev. 0x11)
[ 1.000004] pci_intr_map: no mapping for pin A (line=ff)
[ 1.000004] cannot set up pci_intr_handle_t
[ 1.000004] re0: autoconfiguration error: couldn't map interrupt
[ 1.000004] ppb1 at pci0 dev 19 function 1: Intel Apollo Lake PCIe
A1 (rev. 0xfd)
[ 1.000004] ppb1: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.000004] pci2 at ppb1 bus 2
[ 1.000004] pci2: i/o space, memory space enabled
[ 1.000004] ppb2 at pci0 dev 19 function 2: Intel Apollo Lake PCIe
A2 (rev. 0xfd)
[ 1.000004] ppb2: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.000004] pci3 at ppb2 bus 3
[ 1.000004] pci3: i/o space, memory space enabled
[ 1.000004] ahcisata1 at pci3 dev 0 function 0: ASMedia ASM1061 AHCI
SATA III Controller (rev. 0x02)
[ 1.000004] pci_intr_map: no mapping for pin A (line=ff)
[ 1.000004] cannot set up pci_intr_handle_t
[ 1.000004] ahcisata1: autoconfiguration error: can't allocate
handler
[ 1.000004] ppb3 at pci0 dev 19 function 3: Intel Apollo Lake PCIe
A3 (rev. 0xfd)
[ 1.000004] ppb3: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.000004] pci4 at ppb3 bus 4
[ 1.000004] pci4: i/o space, memory space enabled
[ 1.000004] xhci0 at pci0 dev 21 function 0: Intel Apollo Lake USB
Host (xHCI) (rev. 0x0d)
[ 1.000004] xhci0: 64-bit DMA
[ 1.000004] pci_intr_map: bad interrupt line 17
[ 1.000004] cannot set up pci_intr_handle_t
[ 1.000004] xhci0: autoconfiguration error: can't allocate handler
[ 1.000004] pcib0 at pci0 dev 31 function 0: Intel Apollo Lake LPC
(rev. 0x0d)
[ 1.000004] ichsmb0 at pci0 dev 31 function 1: Intel Apollo Lake
SMBus (rev. 0x0d)
[ 1.000004] pci_intr_map: no mapping for pin A (line=ff)
[ 1.000004] cannot set up pci_intr_handle_t
[ 1.000004] ichsmb0: polling
[ 1.000004] iic0 at ichsmb0: I2C bus
[ 1.000004] isa0 at pcib0
[ 1.000004] lpt0 at isa0 port 0x378-0x37b irq 7
[ 1.000004] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte
FIFO
[ 1.000004] pckbc0 at isa0 port 0x60-0x64
[ 1.000004] attimer0 at isa0 port 0x40-0x43
[ 1.000004] pcppi0 at isa0 port 0x61
[ 1.000004] spkr0 at pcppi0: PC Speaker
[ 1.000004] wsbell at spkr0 not configured
[ 1.000004] midi0 at pcppi0: PC speaker
[ 1.000004] sysbeep0 at pcppi0
[ 1.000004] attimer0: attached to pcppi0
[ 1.000004] coretemp0 at cpu0: thermal sensor, 1 C resolution,
Tjmax=105
[ 1.000004] cpu0: TSC freq CPUID 1497600000 Hz
[ 1.000004] cpu0: TSC freq calibrated 1669612940 Hz
[ 1.015652] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[ 1.015652] timecounter: Timecounter "TSC" frequency 1669612940 Hz
quality 3000
[ 1.016429] IPsec: Initialized Security Association Processing.
[ 1.018068] swwdog0: software watchdog initialized
[ 1.018068] WARNING: 5 errors while detecting hardware; check system
log.
[ 1.018068] boot device: <unknown>
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
2012, 2013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021,
2022, 2023,
[ 1.000000] 2024
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[ 1.000000]
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 16041 MB
[ 1.000000] avail memory = 15488 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.000004] efi: systbl at pa 6dd86018
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x000000006D9C5000 000024 (v02 ALASKA)
[ 1.000004] ACPI: XSDT 0x000000006D9C50C0 0000DC (v01 ALASKA A M I
01072009 AMI 00010013)
[ 1.000004] ACPI: FACP 0x000000006D9CE200 000114 (v06 ALASKA A M I
01072009 AMI 00010013)
[ 1.000004] ACPI: DSDT 0x000000006D9C5240 008FB3 (v02 ALASKA A M I
01072009 INTL 20120913)
[ 1.000004] ACPI: FACS 0x000000006D9E3080 000040
[ 1.000004] ACPI: FPDT 0x000000006D9CE320 000044 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 1.000004] ACPI: FIDT 0x000000006D9CE370 00009C (v01 ALASKA A M I
01072009 AMI 00010013)
[ 1.000004] ACPI: MCFG 0x000000006D9CE410 00003C (v01 ALASKA A M I
01072009 MSFT 00000097)
[ 1.000004] ACPI: DBG2 0x000000006D9CE450 000072 (v00 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: DBGP 0x000000006D9CE4D0 000034 (v01 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: HPET 0x000000006D9CE510 000038 (v01 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: LPIT 0x000000006D9CE550 00005C (v01 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: APIC 0x000000006D9CE5B0 000084 (v03 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: NPKT 0x000000006D9CE640 000065 (v01 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: PRAM 0x000000006D9CE6B0 000030 (v01 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: WSMT 0x000000006D9CE6E0 000028 (v00 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: SSDT 0x000000006D9CE710 000B53 (v02 INTEL
UsbCTabl 00000003 BRXT 0100000D)
[ 1.000004] ACPI: SSDT 0x000000006D9CF270 0016E9 (v01 Intel_
Platform 00001000 INTL 20120913)
[ 1.000004] ACPI: AAFT 0x000000006D9D0960 0002DA (v01 ALASKA OEMAAFT
01072009 MSFT 00000097)
[ 1.000004] ACPI: SSDT 0x000000006D9D0C40 000442 (v02 PmRef Cpu0Ist
00003000 INTL 20120913)
[ 1.000004] ACPI: SSDT 0x000000006D9D1090 00072B (v02 CpuRef CpuSsdt
00003000 INTL 20120913)
[ 1.000004] ACPI: SSDT 0x000000006D9D17C0 00032D (v02 PmRef Cpu0Tst
00003000 INTL 20120913)
[ 1.000004] ACPI: SSDT 0x000000006D9D1AF0 00017C (v02 PmRef ApTst
00003000 INTL 20120913)
[ 1.000004] ACPI: SSDT 0x000000006D9D1C70 002760 (v02 SaSsdt SaSsdt
00003000 INTL 20120913)
[ 1.000004] ACPI: UEFI 0x000000006D9D43D0 000042 (v01 ALASKA A M I
00000000 00000000)
[ 1.000004] ACPI: WDAT 0x000000006D9D4420 000104 (v01
00000000 00000000)
[ 1.000004] ACPI: NHLT 0x000000006D9D4530 001A50 (v00 INTEL EDK2
00000002 01000013)
[ 1.000004] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20,
120 pins
[ 1.000004] cpu0 at mainbus0 apid 0
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: TSC freq CPUID 1497600000 Hz
[ 1.000004] cpu0: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, id
0x506ca
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 2autoconfiguration error: :
multiprocessor boot disabled
[ 1.000004] cpu2 at mainbus0 apid 4autoconfiguration error: :
multiprocessor boot disabled
[ 1.000004] cpu3 at mainbus0 apid 6autoconfiguration error: :
multiprocessor boot disabled
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1.000004] acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId
<AMI ,00010013>
[ 1.000004] acpi0: MCFG: segment 0, bus 0-255, address
0x00000000e0000000
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFB098CC258888 000102 (v02 PmRef Cpu0Cst
00003001 INTL 20120913)
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545
Hz quality 1000
[ 1.033905] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[ 1.033905] timecounter: Timecounter "hpet0" frequency 19200000 Hz
quality 2000
[ 1.036254] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
[ 1.036254] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1.036254] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output
Device
[ 1.036254] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output
Device
[ 1.036254] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output
Device
[ 1.036254] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output
Device
[ 1.036254] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output
Device
[ 1.036254] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output
Device
[ 1.036254] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output
Device
[ 1.036254] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output
Device
[ 1.036254] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output
Device
[ 1.036254] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output
Device
[ 1.036254] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display
Output Device
[ 1.036254] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display
Output Device
[ 1.036254] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display
Output Device
[ 1.036254] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display
Output Device
[ 1.036254] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display
Output Device
[ 1.036254] acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display
Output Device
[ 1.036254] acpiout15: brightness levels: [1-100]
[ 1.036254] acpiout16 at acpivga0 (IPU0, 0x34d7): ACPI Display
Output Device
[ 1.036254] acpivga0: connected output devices:
[ 1.036254] acpivga0: 0x0400 (acpiout15): Unknown Output Device,
head 0
[ 1.036254] com0 at acpi0 (UAR1, PNP0501-0): io 0x3f8-0x3ff irq 4
[ 1.036254] com0: ns16550a, 16-byte FIFO
[ 1.036254] attimer1 at acpi0 (TIMR, PNP0100): io
0x40-0x43,0x50-0x53 irq 0
[ 1.036254] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.036254] GPO0 (INT3452) at acpi0 not configured
[ 1.036254] GPO1 (INT3452) at acpi0 not configured
[ 1.036254] GPO2 (INT3452) at acpi0 not configured
[ 1.036254] GPO3 (INT3452) at acpi0 not configured
[ 1.036254] PEPD (INT33A1) at acpi0 not configured
[ 1.036254] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
[ 1.036254] acpifan0: autoconfiguration error: failed to initialize
[ 1.036254] acpitz0 at acpi0 (TZ01): cpu0
[ 1.036254] acpitz0: active cooling level 0: 60.0C
[ 1.036254] acpitz0: levels: critical 100.0 C, passive 95.0 C
[ 1.036254] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 1.036254] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.036254] pci0: i/o space, memory space enabled, rd/line, rd/mult,
wr/inv ok
[ 1.036254] pchb0 at pci0 dev 0 function 0: Intel Apollo Lake Host
Bridge (rev. 0x0d)
[ 1.036254] i915drmkms0 at pci0 dev 2 function 0: Intel Apollo Lake
Graphics (12EU) (rev. 0x0d)
[ 1.036254] hdaudio0 at pci0 dev 14 function 0: HD Audio Controller
[ 1.036254] hdaudio0: interrupting at msi0 vec 0
[ 1.036254] hdaudio0: HDA ver. 1.0, OSS 6, ISS 7, BSS 0, SDO 1,
64-bit
[ 1.036254] hdafg0 at hdaudio0: Realtek ALC892
[ 1.036254] hdafg0: DAC00 6ch: Speaker [Jack]
[ 1.036254] hdafg0: DAC01 2ch: HP Out [Jack]
[ 1.036254] hdafg0: DIG02 2ch: SPDIF Out [Jack]
[ 1.036254] hdafg0: ADC03 2ch: Line In [Jack], Mic In [Jack]
[ 1.036254] hdafg0: ADC04 2ch: Mic In [Jack]
[ 1.036254] hdafg0: 6ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz
192000Hz PCM16 PCM20 PCM24 AC3
[ 1.036254] audio0 at hdafg0: playback, capture, full duplex,
independent
[ 1.036254] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for playback
[ 1.036254] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for recording
[ 1.036254] spkr0 at audio0: PC Speaker (synthesized)
[ 1.036254] wsbell at spkr0 not configured
[ 1.036254] hdafg1 at hdaudio0: Intel HDMI/DP
[ 1.036254] hdafg1: DP00 8ch: Digital Out [Jack]
[ 1.036254] hdafg1: 8ch/0ch 48000Hz PCM16*
[ 1.036254] audio1 at hdafg1: playback, capture, full duplex,
independent
[ 1.036254] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for playback
[ 1.036254] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for recording
[ 1.036254] spkr1 at audio1: PC Speaker (synthesized)
[ 1.036254] wsbell at spkr1 not configured
[ 1.036254] Intel Apollo Lake TXE HECI1 (miscellaneous
communications, revision 0x0d) at pci0 dev 15 function 0 not configured
[ 1.036254] ahcisata0 at pci0 dev 18 function 0: Intel Apollo Lake
SATA (rev. 0x0d)
[ 1.036254] ahcisata0: 64-bit DMA
[ 1.036254] ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP
0xe136ff01<PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SSNTF,SNCQ,S64A>
[ 1.036254] ahcisata0: interrupting at msi1 vec 0
[ 1.036254] atabus0 at ahcisata0 channel 0
[ 1.036254] atabus1 at ahcisata0 channel 1
[ 1.036254] ppb0 at pci0 dev 19 function 0: Intel Apollo Lake PCIe
A0 (rev. 0xfd)
[ 1.036254] ppb0: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.036254] ppb0: link is x1 @ 2.5GT/s
[ 1.036254] pci1 at ppb0 bus 1
[ 1.036254] pci1: i/o space, memory space enabled
[ 1.036254] re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe
Gigabit Ethernet (rev. 0x11)
[ 1.036254] re0: interrupting at msix2 vec 0
[ 1.036254] re0: RTL8168G/8111G (0x4c00)
[ 1.036254] re0: Ethernet address a8:a1:59:d8:d6:39
[ 1.036254] re0: using 256 tx descriptors
[ 1.036254] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media
interface, rev. 0
[ 1.036254] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, auto
[ 1.036254] ppb1 at pci0 dev 19 function 1: Intel Apollo Lake PCIe
A1 (rev. 0xfd)
[ 1.036254] ppb1: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.036254] pci2 at ppb1 bus 2
[ 1.036254] pci2: i/o space, memory space enabled
[ 1.036254] ppb2 at pci0 dev 19 function 2: Intel Apollo Lake PCIe
A2 (rev. 0xfd)
[ 1.036254] ppb2: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.036254] pci3 at ppb2 bus 3
[ 1.036254] pci3: i/o space, memory space enabled
[ 1.036254] ahcisata1 at pci3 dev 0 function 0: ASMedia ASM1061 AHCI
SATA III Controller (rev. 0x02)
[ 1.036254] ahcisata1: 64-bit DMA
[ 1.036254] ahcisata1: AHCI revision 1.20, 2 ports, 32 slots, CAP
0xeb32ffa1<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A>
[ 1.036254] ahcisata1: interrupting at msi3 vec 0
[ 1.036254] atabus2 at ahcisata1 channel 0
[ 1.036254] atabus3 at ahcisata1 channel 1
[ 1.036254] ppb3 at pci0 dev 19 function 3: Intel Apollo Lake PCIe
A3 (rev. 0xfd)
[ 1.036254] ppb3: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.036254] pci4 at ppb3 bus 4
[ 1.036254] pci4: i/o space, memory space enabled
[ 1.036254] xhci0 at pci0 dev 21 function 0: Intel Apollo Lake USB
Host (xHCI) (rev. 0x0d)
[ 1.036254] xhci0: 64-bit DMA
[ 1.036254] xhci0: interrupting at msi4 vec 0
[ 1.036254] xhci0: xHCI version 1.0
[ 1.036254] usb0 at xhci0: USB revision 3.0
[ 1.036254] usb1 at xhci0: USB revision 2.0
[ 1.036254] pcib0 at pci0 dev 31 function 0: Intel Apollo Lake LPC
(rev. 0x0d)
[ 1.036254] ichsmb0 at pci0 dev 31 function 1: Intel Apollo Lake
SMBus (rev. 0x0d)
[ 1.036254] pci_intr_map: no mapping for pin A (line=ff)
[ 1.036254] cannot set up pci_intr_handle_t
[ 1.036254] ichsmb0: polling
[ 1.036254] iic0 at ichsmb0: I2C bus
[ 1.036254] isa0 at pcib0
[ 1.036254] lpt0 at isa0 port 0x378-0x37b irq 7
[ 1.036254] pckbc0 at isa0 port 0x60-0x64
[ 1.036254] pcppi0 at isa0 port 0x61
[ 1.036254] spkr2 at pcppi0: PC Speaker
[ 1.036254] wsbell at spkr2 not configured
[ 1.036254] midi0 at pcppi0: PC speaker
[ 1.036254] sysbeep0 at pcppi0
[ 1.036254] attimer1: attached to pcppi0
[ 1.036254] acpicpu0 at cpu0: ACPI CPU
[ 1.036254] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.036254] acpicpu0: C2: FFH, lat 50 us, pow 10 mW
[ 1.036254] acpicpu0: C3: FFH, lat 150 us, pow 10 mW
[ 1.036254] acpicpu0: P0: FFH, lat 10 us, pow 0 mW, 1501 MHz,
turbo boost
[ 1.036254] acpicpu0: P1: FFH, lat 10 us, pow 0 mW, 1500 MHz
[ 1.036254] acpicpu0: P2: FFH, lat 10 us, pow 0 mW, 1400 MHz
[ 1.036254] acpicpu0: P3: FFH, lat 10 us, pow 0 mW, 1300 MHz
[ 1.036254] acpicpu0: P4: FFH, lat 10 us, pow 0 mW, 1200 MHz
[ 1.036254] acpicpu0: P5: FFH, lat 10 us, pow 0 mW, 1100 MHz
[ 1.036254] acpicpu0: P6: FFH, lat 10 us, pow 0 mW, 1000 MHz
[ 1.036254] acpicpu0: P7: FFH, lat 10 us, pow 0 mW, 900 MHz
[ 1.036254] acpicpu0: P8: FFH, lat 10 us, pow 0 mW, 800 MHz
[ 1.036254] acpicpu0: T0: FFH, lat 1 us, pow 0 mW, 100 %
[ 1.036254] acpicpu0: T1: FFH, lat 1 us, pow 0 mW, 88 %
[ 1.036254] acpicpu0: T2: FFH, lat 1 us, pow 0 mW, 75 %
[ 1.036254] acpicpu0: T3: FFH, lat 1 us, pow 0 mW, 63 %
[ 1.036254] acpicpu0: T4: FFH, lat 1 us, pow 0 mW, 50 %
[ 1.036254] acpicpu0: T5: FFH, lat 1 us, pow 0 mW, 38 %
[ 1.036254] acpicpu0: T6: FFH, lat 1 us, pow 0 mW, 25 %
[ 1.036254] acpicpu0: T7: FFH, lat 1 us, pow 0 mW, 13 %
[ 1.036254] coretemp0 at cpu0: thermal sensor, 1 C resolution,
Tjmax=105
[ 1.036254] cpu0: TSC freq CPUID 1497600000 Hz
[ 1.036254] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[ 1.036254] timecounter: Timecounter "TSC" frequency 1497600000 Hz
quality 3000
[ 2.034091] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 3.00/1.00, addr 0
[ 2.034091] uhub0: 7 ports with 7 removable, self powered
[ 2.034091] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 0
[ 2.034091] uhub1: 8 ports with 8 removable, self powered
[ 2.034091] IPsec: Initialized Security Association Processing.
[ 2.133347] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 2.133347] ahcisata0 port 1: device present, speed: 6.0Gb/s
[ 2.133347] ahcisata1 port 0: device present, speed: 6.0Gb/s
[ 2.133347] ahcisata1 port 1: device present, speed: 6.0Gb/s
[ 2.513347] uhidev0 at uhub1 port 5 configuration 1 interface 0
[ 2.513347] uhidev0: vendor 046a (0x046a) product 0011 (0x0011), rev
2.00/1.07, addr 1, iclass 3/1
[ 2.523351] ukbd0 at uhidev0
[ 2.523351] wskbd0 at ukbd0: console keyboard
[ 3.703347] wd0 at atabus0 drive 0
[ 3.703347] wd0: <ST1000LM048-2E7172>
[ 3.703347] wd0: drive supports 16-sector PIO transfers, LBA48
addressing
[ 3.703347] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512
bytes/sect x 1953525168 sectors (4096 bytes/physsect; first aligned
sector: 8)
[ 4.053349] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 4.083348] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 4.083348] wd1 at atabus1 drive 0
[ 4.083348] wd1: <ST2000LM015-2E8174>
[ 4.083348] wd1: drive supports 16-sector PIO transfers, LBA48
addressing
[ 4.083348] wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512
bytes/sect x 3907029168 sectors (4096 bytes/physsect; first aligned
sector: 8)
[ 4.463348] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 4.483348] wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 4.483348] wd2 at atabus2 drive 0
[ 4.493351] wd2: <ST1000LM048-2E7172>
[ 4.493351] wd2: drive supports 16-sector PIO transfers, LBA48
addressing
[ 4.493351] wd2: 931 GB, 1938021 cyl, 16 head, 63 sec, 512
bytes/sect x 1953525168 sectors (4096 bytes/physsect; first aligned
sector: 8)
[ 4.883348] wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 4.903348] wd2(ahcisata1:0:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 4.903348] wd3 at atabus3 drive 0
[ 4.913351] wd3: <ST2000LM015-2E8174>
[ 4.913351] wd3: drive supports 16-sector PIO transfers, LBA48
addressing
[ 4.913351] wd3: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512
bytes/sect x 3907029168 sectors (4096 bytes/physsect; first aligned
sector: 8)
[ 5.263347] wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 5.293348] wd3(ahcisata1:1:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 8.073347] uhub1: port 6, set config at addr 2 failed
[ 8.083349] uhub1: autoconfiguration error: device problem,
disabling port 6
[ 8.083349] swwdog0: software watchdog initialized
[ 8.103347] WARNING: 5 errors while detecting hardware; check system
log.
[ 8.113349] boot device: <unknown>
[ 8.113349] root device: sd0a
[ 10.299214] use one of: re0 wd0[a-p] wd1[a-p] wd2[a-p] wd3[a-p] ddb
halt reboot
[ 10.299214] root device: reboot
[ 12.008112] syncing disks... done
[ 12.008112] wd3: detached
[ 12.008112] wd2: detached
[ 12.008112] sysbeep0: detached
[ 12.008112] midi0: detached
[ 12.018373] atabus3: detached
[ 12.018373] atabus2: detached
[ 12.018373] wd1: detached
[ 12.018373] wd0: detached
[ 12.018373] uhub0: detached
[ 12.018373] ahcisata1: detached
[ 12.029016] iic0: detached
[ 12.029016] usb0: detached
[ 12.029016] pci4: detached
[ 12.029016] pci3: detached
[ 12.029016] pci2: detached
[ 12.029016] atabus1: detached
[ 12.039490] atabus0: detached
[ 12.039490] ichsmb0: detached
[ 12.039490] ppb3: detached
[ 12.039490] ppb2: detached
[ 12.039490] ppb1: detached
[ 12.048412] ahcisata0: detached
[ 12.048412] pchb0: detached
[ 12.048412] attimer1: detached
[ 12.048412] rebooting...
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
2012, 2013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021,
2022, 2023,
[ 1.000000] 2024
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[ 1.000000]
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 16041 MB
[ 1.000000] avail memory = 15488 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.000004] efi: systbl at pa 6dd86018
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x000000006D9C5000 000024 (v02 ALASKA)
[ 1.000004] ACPI: XSDT 0x000000006D9C50C0 0000DC (v01 ALASKA A M I
01072009 AMI 00010013)
[ 1.000004] ACPI: FACP 0x000000006D9CE200 000114 (v06 ALASKA A M I
01072009 AMI 00010013)
[ 1.000004] ACPI: DSDT 0x000000006D9C5240 008FB3 (v02 ALASKA A M I
01072009 INTL 20120913)
[ 1.000004] ACPI: FACS 0x000000006D9E3080 000040
[ 1.000004] ACPI: FPDT 0x000000006D9CE320 000044 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 1.000004] ACPI: FIDT 0x000000006D9CE370 00009C (v01 ALASKA A M I
01072009 AMI 00010013)
[ 1.000004] ACPI: MCFG 0x000000006D9CE410 00003C (v01 ALASKA A M I
01072009 MSFT 00000097)
[ 1.000004] ACPI: DBG2 0x000000006D9CE450 000072 (v00 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: DBGP 0x000000006D9CE4D0 000034 (v01 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: HPET 0x000000006D9CE510 000038 (v01 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: LPIT 0x000000006D9CE550 00005C (v01 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: APIC 0x000000006D9CE5B0 000084 (v03 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: NPKT 0x000000006D9CE640 000065 (v01 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: PRAM 0x000000006D9CE6B0 000030 (v01 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: WSMT 0x000000006D9CE6E0 000028 (v00 INTEL EDK2
00000003 BRXT 0100000D)
[ 1.000004] ACPI: SSDT 0x000000006D9CE710 000B53 (v02 INTEL
UsbCTabl 00000003 BRXT 0100000D)
[ 1.000004] ACPI: SSDT 0x000000006D9CF270 0016E9 (v01 Intel_
Platform 00001000 INTL 20120913)
[ 1.000004] ACPI: AAFT 0x000000006D9D0960 0002DA (v01 ALASKA OEMAAFT
01072009 MSFT 00000097)
[ 1.000004] ACPI: SSDT 0x000000006D9D0C40 000442 (v02 PmRef Cpu0Ist
00003000 INTL 20120913)
[ 1.000004] ACPI: SSDT 0x000000006D9D1090 00072B (v02 CpuRef CpuSsdt
00003000 INTL 20120913)
[ 1.000004] ACPI: SSDT 0x000000006D9D17C0 00032D (v02 PmRef Cpu0Tst
00003000 INTL 20120913)
[ 1.000004] ACPI: SSDT 0x000000006D9D1AF0 00017C (v02 PmRef ApTst
00003000 INTL 20120913)
[ 1.000004] ACPI: SSDT 0x000000006D9D1C70 002760 (v02 SaSsdt SaSsdt
00003000 INTL 20120913)
[ 1.000004] ACPI: UEFI 0x000000006D9D43D0 000042 (v01 ALASKA A M I
00000000 00000000)
[ 1.000004] ACPI: WDAT 0x000000006D9D4420 000104 (v01
00000000 00000000)
[ 1.000004] ACPI: NHLT 0x000000006D9D4530 001A50 (v00 INTEL EDK2
00000002 01000013)
[ 1.000004] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20,
120 pins
[ 1.000004] cpu0 at mainbus0 apid 0
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: TSC freq CPUID 1497600000 Hz
[ 1.000004] cpu0: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, id
0x506ca
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 2autoconfiguration error: :
multiprocessor boot disabled
[ 1.000004] cpu2 at mainbus0 apid 4autoconfiguration error: :
multiprocessor boot disabled
[ 1.000004] cpu3 at mainbus0 apid 6autoconfiguration error: :
multiprocessor boot disabled
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1.000004] acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId
<AMI ,00010013>
[ 1.000004] acpi0: MCFG: segment 0, bus 0-255, address
0x00000000e0000000
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFF93DC96858888 000102 (v02 PmRef Cpu0Cst
00003001 INTL 20120913)
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545
Hz quality 1000
[ 1.033834] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[ 1.033834] timecounter: Timecounter "hpet0" frequency 19200000 Hz
quality 2000
[ 1.036188] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
[ 1.036188] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1.036188] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output
Device
[ 1.036188] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output
Device
[ 1.036188] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output
Device
[ 1.036188] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output
Device
[ 1.036188] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output
Device
[ 1.036188] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output
Device
[ 1.036188] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output
Device
[ 1.036188] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output
Device
[ 1.036188] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output
Device
[ 1.036188] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output
Device
[ 1.036188] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display
Output Device
[ 1.036188] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display
Output Device
[ 1.036188] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display
Output Device
[ 1.036188] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display
Output Device
[ 1.036188] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display
Output Device
[ 1.036188] acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display
Output Device
[ 1.036188] acpiout15: brightness levels: [1-100]
[ 1.036188] acpiout16 at acpivga0 (IPU0, 0x34d7): ACPI Display
Output Device
[ 1.036188] acpivga0: connected output devices:
[ 1.036188] acpivga0: 0x0400 (acpiout15): Unknown Output Device,
head 0
[ 1.036188] com0 at acpi0 (UAR1, PNP0501-0): io 0x3f8-0x3ff irq 4
[ 1.036188] com0: ns16550a, 16-byte FIFO
[ 1.036188] attimer1 at acpi0 (TIMR, PNP0100): io
0x40-0x43,0x50-0x53 irq 0
[ 1.036188] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.036188] GPO0 (INT3452) at acpi0 not configured
[ 1.036188] GPO1 (INT3452) at acpi0 not configured
[ 1.036188] GPO2 (INT3452) at acpi0 not configured
[ 1.036188] GPO3 (INT3452) at acpi0 not configured
[ 1.036188] PEPD (INT33A1) at acpi0 not configured
[ 1.036188] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
[ 1.036188] acpifan0: autoconfiguration error: failed to initialize
[ 1.036188] acpitz0 at acpi0 (TZ01): cpu0
[ 1.036188] acpitz0: active cooling level 0: 60.0C
[ 1.036188] acpitz0: levels: critical 100.0 C, passive 95.0 C
[ 1.036188] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 1.036188] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.036188] pci0: i/o space, memory space enabled, rd/line, rd/mult,
wr/inv ok
[ 1.036188] pchb0 at pci0 dev 0 function 0: Intel Apollo Lake Host
Bridge (rev. 0x0d)
[ 1.036188] i915drmkms0 at pci0 dev 2 function 0: Intel Apollo Lake
Graphics (12EU) (rev. 0x0d)
[ 1.036188] hdaudio0 at pci0 dev 14 function 0: HD Audio Controller
[ 1.036188] hdaudio0: interrupting at msi0 vec 0
[ 1.036188] hdaudio0: HDA ver. 1.0, OSS 6, ISS 7, BSS 0, SDO 1,
64-bit
[ 1.036188] hdafg0 at hdaudio0: Realtek ALC892
[ 1.036188] hdafg0: DAC00 6ch: Speaker [Jack]
[ 1.036188] hdafg0: DAC01 2ch: HP Out [Jack]
[ 1.036188] hdafg0: DIG02 2ch: SPDIF Out [Jack]
[ 1.036188] hdafg0: ADC03 2ch: Line In [Jack], Mic In [Jack]
[ 1.036188] hdafg0: ADC04 2ch: Mic In [Jack]
[ 1.036188] hdafg0: 6ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz
192000Hz PCM16 PCM20 PCM24 AC3
[ 1.036188] audio0 at hdafg0: playback, capture, full duplex,
independent
[ 1.036188] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for playback
[ 1.036188] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for recording
[ 1.036188] spkr0 at audio0: PC Speaker (synthesized)
[ 1.036188] wsbell at spkr0 not configured
[ 1.036188] hdafg1 at hdaudio0: Intel HDMI/DP
[ 1.036188] hdafg1: DP00 8ch: Digital Out [Jack]
[ 1.036188] hdafg1: 8ch/0ch 48000Hz PCM16*
[ 1.036188] audio1 at hdafg1: playback, capture, full duplex,
independent
[ 1.036188] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for playback
[ 1.036188] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for recording
[ 1.036188] spkr1 at audio1: PC Speaker (synthesized)
[ 1.036188] wsbell at spkr1 not configured
[ 1.036188] Intel Apollo Lake TXE HECI1 (miscellaneous
communications, revision 0x0d) at pci0 dev 15 function 0 not configured
[ 1.036188] ahcisata0 at pci0 dev 18 function 0: Intel Apollo Lake
SATA (rev. 0x0d)
[ 1.036188] ahcisata0: 64-bit DMA
[ 1.036188] ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP
0xe136ff01<PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SSNTF,SNCQ,S64A>
[ 1.036188] ahcisata0: interrupting at msi1 vec 0
[ 1.036188] atabus0 at ahcisata0 channel 0
[ 1.036188] atabus1 at ahcisata0 channel 1
[ 1.036188] ppb0 at pci0 dev 19 function 0: Intel Apollo Lake PCIe
A0 (rev. 0xfd)
[ 1.036188] ppb0: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.036188] ppb0: link is x1 @ 2.5GT/s
[ 1.036188] pci1 at ppb0 bus 1
[ 1.036188] pci1: i/o space, memory space enabled
[ 1.036188] re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe
Gigabit Ethernet (rev. 0x11)
[ 1.036188] re0: interrupting at msix2 vec 0
[ 1.036188] re0: RTL8168G/8111G (0x4c00)
[ 1.036188] re0: Ethernet address a8:a1:59:d8:d6:39
[ 1.036188] re0: using 256 tx descriptors
[ 1.036188] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media
interface, rev. 0
[ 1.036188] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, auto
[ 1.036188] ppb1 at pci0 dev 19 function 1: Intel Apollo Lake PCIe
A1 (rev. 0xfd)
[ 1.036188] ppb1: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.036188] pci2 at ppb1 bus 2
[ 1.036188] pci2: i/o space, memory space enabled
[ 1.036188] ppb2 at pci0 dev 19 function 2: Intel Apollo Lake PCIe
A2 (rev. 0xfd)
[ 1.036188] ppb2: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.036188] pci3 at ppb2 bus 3
[ 1.036188] pci3: i/o space, memory space enabled
[ 1.036188] ahcisata1 at pci3 dev 0 function 0: ASMedia ASM1061 AHCI
SATA III Controller (rev. 0x02)
[ 1.036188] ahcisata1: 64-bit DMA
[ 1.036188] ahcisata1: AHCI revision 1.20, 2 ports, 32 slots, CAP
0xeb32ffa1<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A>
[ 1.036188] ahcisata1: interrupting at msi3 vec 0
[ 1.036188] atabus2 at ahcisata1 channel 0
[ 1.036188] atabus3 at ahcisata1 channel 1
[ 1.036188] ppb3 at pci0 dev 19 function 3: Intel Apollo Lake PCIe
A3 (rev. 0xfd)
[ 1.036188] ppb3: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.036188] pci4 at ppb3 bus 4
[ 1.036188] pci4: i/o space, memory space enabled
[ 1.036188] xhci0 at pci0 dev 21 function 0: Intel Apollo Lake USB
Host (xHCI) (rev. 0x0d)
[ 1.036188] xhci0: 64-bit DMA
[ 1.036188] xhci0: interrupting at msi4 vec 0
[ 1.036188] xhci0: xHCI version 1.0
[ 1.036188] usb0 at xhci0: USB revision 3.0
[ 1.036188] usb1 at xhci0: USB revision 2.0
[ 1.036188] pcib0 at pci0 dev 31 function 0: Intel Apollo Lake LPC
(rev. 0x0d)
[ 1.036188] ichsmb0 at pci0 dev 31 function 1: Intel Apollo Lake
SMBus (rev. 0x0d)
[ 1.036188] pci_intr_map: no mapping for pin A (line=ff)
[ 1.036188] cannot set up pci_intr_handle_t
[ 1.036188] ichsmb0: polling
[ 1.036188] iic0 at ichsmb0: I2C bus
[ 1.036188] isa0 at pcib0
[ 1.036188] lpt0 at isa0 port 0x378-0x37b irq 7
[ 1.036188] pckbc0 at isa0 port 0x60-0x64
[ 1.036188] pcppi0 at isa0 port 0x61
[ 1.036188] spkr2 at pcppi0: PC Speaker
[ 1.036188] wsbell at spkr2 not configured
[ 1.036188] midi0 at pcppi0: PC speaker
[ 1.036188] sysbeep0 at pcppi0
[ 1.036188] attimer1: attached to pcppi0
[ 1.036188] acpicpu0 at cpu0: ACPI CPU
[ 1.036188] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.036188] acpicpu0: C2: FFH, lat 50 us, pow 10 mW
[ 1.036188] acpicpu0: C3: FFH, lat 150 us, pow 10 mW
[ 1.036188] acpicpu0: P0: FFH, lat 10 us, pow 0 mW, 1501 MHz,
turbo boost
[ 1.036188] acpicpu0: P1: FFH, lat 10 us, pow 0 mW, 1500 MHz
[ 1.036188] acpicpu0: P2: FFH, lat 10 us, pow 0 mW, 1400 MHz
[ 1.036188] acpicpu0: P3: FFH, lat 10 us, pow 0 mW, 1300 MHz
[ 1.036188] acpicpu0: P4: FFH, lat 10 us, pow 0 mW, 1200 MHz
[ 1.036188] acpicpu0: P5: FFH, lat 10 us, pow 0 mW, 1100 MHz
[ 1.036188] acpicpu0: P6: FFH, lat 10 us, pow 0 mW, 1000 MHz
[ 1.036188] acpicpu0: P7: FFH, lat 10 us, pow 0 mW, 900 MHz
[ 1.036188] acpicpu0: P8: FFH, lat 10 us, pow 0 mW, 800 MHz
[ 1.036188] acpicpu0: T0: FFH, lat 1 us, pow 0 mW, 100 %
[ 1.036188] acpicpu0: T1: FFH, lat 1 us, pow 0 mW, 88 %
[ 1.036188] acpicpu0: T2: FFH, lat 1 us, pow 0 mW, 75 %
[ 1.036188] acpicpu0: T3: FFH, lat 1 us, pow 0 mW, 63 %
[ 1.036188] acpicpu0: T4: FFH, lat 1 us, pow 0 mW, 50 %
[ 1.036188] acpicpu0: T5: FFH, lat 1 us, pow 0 mW, 38 %
[ 1.036188] acpicpu0: T6: FFH, lat 1 us, pow 0 mW, 25 %
[ 1.036188] acpicpu0: T7: FFH, lat 1 us, pow 0 mW, 13 %
[ 1.036188] coretemp0 at cpu0: thermal sensor, 1 C resolution,
Tjmax=105
[ 1.036188] cpu0: TSC freq CPUID 1497600000 Hz
[ 1.036188] cpu0: TSC freq calibrated 1497602000 Hz
[ 1.036188] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[ 1.036188] timecounter: Timecounter "TSC" frequency 1497602000 Hz
quality 3000
[ 2.033940] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 3.00/1.00, addr 0
[ 2.033940] uhub0: 7 ports with 7 removable, self powered
[ 2.033940] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 0
[ 2.033940] uhub1: 8 ports with 8 removable, self powered
[ 2.033940] IPsec: Initialized Security Association Processing.
[ 2.133198] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 2.133198] ahcisata0 port 1: device present, speed: 6.0Gb/s
[ 2.133198] ahcisata1 port 0: device present, speed: 6.0Gb/s
[ 2.133198] ahcisata1 port 1: device present, speed: 6.0Gb/s
[ 3.703195] wd0 at atabus0 drive 0
[ 3.703195] wd0: <ST1000LM048-2E7172>
[ 3.703195] wd0: drive supports 16-sector PIO transfers, LBA48
addressing
[ 3.703195] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512
bytes/sect x 1953525168 sectors (4096 bytes/physsect; first aligned
sector: 8)
[ 4.073196] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 4.103195] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 4.103195] wd1 at atabus1 drive 0
[ 4.103195] wd1: <ST2000LM015-2E8174>
[ 4.113341] wd1: drive supports 16-sector PIO transfers, LBA48
addressing
[ 4.113341] wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512
bytes/sect x 3907029168 sectors (4096 bytes/physsect; first aligned
sector: 8)
[ 4.463196] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 4.493195] wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 4.493195] wd2 at atabus2 drive 0
[ 4.493195] wd2: <ST1000LM048-2E7172>
[ 4.503808] wd2: drive supports 16-sector PIO transfers, LBA48
addressing
[ 4.503808] wd2: 931 GB, 1938021 cyl, 16 head, 63 sec, 512
bytes/sect x 1953525168 sectors (4096 bytes/physsect; first aligned
sector: 8)
[ 4.873194] wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 4.903194] wd2(ahcisata1:0:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 4.903194] wd3 at atabus3 drive 0
[ 4.903194] wd3: <ST2000LM015-2E8174>
[ 4.914151] wd3: drive supports 16-sector PIO transfers, LBA48
addressing
[ 4.914151] wd3: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512
bytes/sect x 3907029168 sectors (4096 bytes/physsect; first aligned
sector: 8)
[ 5.263195] wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 5.293194] wd3(ahcisata1:1:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 13.003183] umass0 at uhub1 port 3 configuration 1 interface 0
[ 13.003183] umass0: JetFlash (0x058f) product 6387 (0x6387), rev
2.00/1.00, addr 1
[ 13.003183] umass0: using SCSI over Bulk-Only
[ 13.003183] scsibus0 at umass0: 2 targets, 1 lun per target
[ 13.003183] sd0 at scsibus0 target 0 lun 0: <JetFlash, Transcend
4GB, 8.07> disk removable
[ 13.014508] sd0: fabricating a geometry
[ 13.014508] sd0: 3830 MB, 3830 cyl, 64 head, 32 sec, 512 bytes/sect
x 7843840 sectors
[ 13.023184] sd0: fabricating a geometry
[ 13.393182] sd0: GPT GUID: 867794b8-d609-49ee-9c51-33a08260ec8b
[ 13.393182] dk0 at sd0: "EFI system", 262144 blocks at 2048, type:
msdos
[ 13.393182] dk1 at sd0: "3c386667-4e85-4442-ac6e-943931e02174",
4853760 blocks at 264192, type: ffs
[ 13.483182] uhidev0 at uhub1 port 5 configuration 1 interface 0
[ 13.483182] uhidev0: vendor 046a (0x046a) product 0011 (0x0011), rev
2.00/1.07, addr 2, iclass 3/1
[ 13.493183] ukbd0 at uhidev0
[ 13.493183] wskbd0 at ukbd0: console keyboard
[ 13.493183] swwdog0: software watchdog initialized
[ 13.613181] WARNING: 4 errors while detecting hardware; check system
log.
[ 13.625087] boot device: sd0
[ 13.625087] root on dk1
[ 13.643184] root file system type: ffs
[ 13.643184] kern.module.path=/stand/amd64/10.1/modules
[ 13.643184] [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
[ 13.655253] [drm] Driver supports precise vblank timestamp query.
[ 13.655253] i915drmkms0: interrupting at msi5 vec 0 (i915drmkms0)
[ 13.655253] WARNING: clock gained 27 days
[ 13.663184] i915drmkms0: notice: Failed to load DMC firmware
i915/bxt_dmc_ver1_07.bin. Disabling runtime power management.
[ 13.683183] i915drmkms0: notice: RC6 and powersaving disabled by
BIOS
[ 13.694487] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on
minor 0
[ 13.723180] intelfb0 at i915drmkms0
[ 13.723180] [drm] DRM_I915_DEBUG enabled
[ 13.733960] [drm] DRM_I915_DEBUG_GEM enabled
[ 13.733960] intelfb0: framebuffer at 0x80040000, size 1024x768,
depth 32, stride 4096
[ 13.763180] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100
emulation), using wskbd0
[ 13.763180] wsmux1: connecting to wsdisplay0
Am 12.01.2025 22:20, schrieb Andrius V via gnats:
The following reply was made to PR port-amd64/58982; it has been noted
by GNATS.
From: Andrius V <vezhlys%gmail.com@localhost>
To: wgstuken%grimme-reitenspezial.de@localhost
Cc: gnats-bugs%netbsd.org@localhost
Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed
to
boot on J3455-ITX board (ASRock)
Date: Sun, 12 Jan 2025 23:14:58 +0200
On Sun, Jan 12, 2025 at 10:02=E2=80=AFPM
<wgstuken%grimme-reitenspezial.de@localhost>=
wrote:
>
> Hi,
>
> just as remark at the beginning : today it was nessesary to reset
the
> CMOS after trying to boot of 10.1 in SMP mode (by accident) ....
> VGA monitor output was dark - even for bios setup menus.
> There must have something thrown some bombs around ...
> This has not happend yesterday - do not ask me why ...
Weird indeed, can't comment on this, likely some machine state was
messed up. I had issues with certain graphics cards in the past too.
>
> I had a try with 10.1 and 'boot -12'
> This bring up the kernel but failed to initialize USB - keyboard
lost,
> no input possible.
>
> next try 'boot -2'
> This bring up the kernel, but failed to setup sd0 (the USB-stick),
> keyboard not working anymore -> nothing to boot from ...
>
> next try 'boot -1'
> This bring up the kernel and allows to boot from USB-stick. (two
times
> due to USB initialisation problem when USB-stick attached to same
> hardware as keyboard also connected.)
> It enters system setup. I dropped to shell from there.
>
> the boot -1 and boot -2 messages are inside attached file - system
not
> powered down inbetween so all messages are there ...
>
> The 'boot -2 try failed to setup 'all' interrupt handler - no
devices
> active ...
>
> The 'boot -1' looks better ....
Yes, not all systems boot well without ACPI especially (-2 option) or
SMP (-1). Combinations in-between can result in unexpected issues. Not
out the question that there are more issues.
> "cpuctl -a cpu0" runs into usage message
> "cat /proc/cpuinfo' - output attached too.
>
> I run 'cpuctl identify 0' - this looks like what you like to get
with
> above cpuctl call.
> See output attached.
I can't seem to find attached files? Can you please try to resend them
or copy of them output to the email itself?
>
> Last thing I've done today: try with
NetBSD-8.0-amd64-uefi-install.img
> ...
>
> Boot failed too with 'failed to start CPU1' ....
> 'boot -1' comes up again.
>
> So looks like this is not covered by whatever workaround in 8.0.
>
Thanks for all of your testing, not working workaround adds to my
suspicion regarding stepping. Currently netbsd code applies errata to
stepping 9 only.
If we can confirm that your CPU stepping is different, removing the
check hopefully will help to solve the boot issue at least.
Regards,
Andrius V
Home |
Main Index |
Thread Index |
Old Index