NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: port-amd64/58732: i915drmkms black screen on boot

The following reply was made to PR port-amd64/58732; it has been noted by GNATS.

From: Bryan Zuber <bjzuber%icloud.com@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: port-amd64/58732: i915drmkms black screen on boot
Date: Wed, 9 Oct 2024 10:21:50 -0500

 Adding `userconf=disable acpivga*` to /boot.cfg has no effect, the 
 device still hangs when booting without a monitor plugged in.
 
 Here is /var/run/dmesg.boot:
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
      2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
      2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
      2024
      The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
      The Regents of the University of California.  All rights reserved.
 
 NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
 mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
 total memory = 1921 MB
 avail memory = 1828 MB
 timecounter: Timecounters tick every 10.000 msec
 Kernelized RAIDframe activated
 i915drmkms* disabled
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 efi: systbl at pa 77df7018
 mainbus0 (root)
 ACPI: RSDP 0x0000000077E1C014 000024 (v02 COREv4)
 ACPI: XSDT 0x0000000077E1B0E8 00006C (v01 COREv4 COREBOOT 00000000      
 01000013)
 ACPI: FACP 0x0000000077E1A000 000114 (v06 COREv4 COREBOOT 00000000 CORE 
 20230628)
 ACPI: DSDT 0x0000000077E16000 00357C (v02 COREv4 COREBOOT 20110725 INTL 
 20230628)
 ACPI: FACS 0x0000000077E36240 000040
 ACPI: SSDT 0x0000000077E15000 000EFC (v02 COREv4 COREBOOT 00000000 CORE 
 20230628)
 ACPI: MCFG 0x0000000077E14000 00003C (v01 COREv4 COREBOOT 00000000 CORE 
 20230628)
 ACPI: TCPA 0x0000000077E13000 000032 (v02 COREv4 COREBOOT 00000000 CORE 
 20230628)
 ACPI: APIC 0x0000000077E12000 000062 (v03 COREv4 COREBOOT 00000000 CORE 
 20230628)
 ACPI: HPET 0x0000000077E11000 000038 (v01 COREv4 COREBOOT 00000000 CORE 
 20230628)
 ACPI: SSDT 0x0000000077E10000 00005C (v02 COREv4 SERIALIO 0000002B CORE 
 20230628)
 ACPI: TCPA 0x0000000077E0F000 000032 (v02 INTEL  EDK2 00000002      
 01000013)
 ACPI: BGRT 0x0000000077E0E000 000038 (v01 INTEL  EDK2 00000002      
 01000013)
 ACPI: 3 ACPI AML tables successfully acquired and loaded
 ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 40 pins
 cpu0 at mainbus0 apid 0
 cpu0: Use lfence to serialize rdtsc
 cpu0: Intel(R) Celeron(R) 2955U @ 1.40GHz, id 0x40651
 cpu0: node 0, package 0, core 0, smt 0
 cpu1 at mainbus0 apid 2
 cpu1: Intel(R) Celeron(R) 2955U @ 1.40GHz, id 0x40651
 cpu1: node 0, package 0, core 1, smt 0
 acpi0 at mainbus0: Intel ACPICA 20221020
 acpi0: X/RSDT: OemId <COREv4,COREBOOT,00000000>, AslId <    ,01000013>
 acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
 acpi0: SCI interrupting at int 9
 acpi0: fixed power button present
 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 FWH (INT0800) at acpi0 not configured
 attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
 GPIO (INT33C7) at acpi0 not configured
 com0 at acpi0 (COM1, PNP0501-1): io 0x3f8-0x3ff irq 4
 com0: ns16550a, 16-byte FIFO
 tpm0 at acpi0 (TPM, PNP0C31-2313387420): io 0xc31-0xc32 mem 
 0xfed40000-0xfed44fff
 tpm0: device 0x000b15d1 rev 0x10
 acpitz0 at acpi0 (THRM): cpu0 cpu1
 acpitz0: active cooling level 0: 90.0C
 acpitz0: active cooling level 1: 75.0C
 acpitz0: active cooling level 2: 67.0C
 acpitz0: active cooling level 3: 50.0C
 acpitz0: active cooling level 4: 0.0C
 acpitz0: levels: critical 100.0 C, passive 90.0 C
 acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
 acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
 acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
 acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
 acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
 CTBL (BOOT0000) at acpi0 not configured
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: Intel Core 4G (mobile) Host Bridge, DRAM 
 (rev. 0x09)
 genfb0 at pci0 dev 2 function 0: Intel HD Graphics (GT1) (rev. 0x09)
 genfb0: framebuffer at 0x80000000, size 1024x768, depth 32, stride 4096
 genfb0: shadow framebuffer enabled, size 3072 KB
 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 drm at genfb0 not configured
 hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
 hdaudio0: interrupting at msi0 vec 0
 hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
 hdafg0 at hdaudio0: Intel HDMI/DP
 hdafg0: DP00 8ch: Digital Out [Jack]
 hdafg0: 8ch/0ch 48000Hz PCM16*
 audio0 at hdafg0: playback
 audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
 spkr0 at audio0: PC Speaker (synthesized)
 wsbell at spkr0 not configured
 Intel product 0a03 (miscellaneous DASP, revision 0x09) at pci0 dev 4 
 function 0 not configured
 xhci0 at pci0 dev 20 function 0: Intel Core 4G (mobile) USB xHCI (rev. 0x04)
 xhci0: 64-bit DMA
 xhci0: interrupting at msi1 vec 0
 xhci0: xHCI version 1.0
 usb0 at xhci0: USB revision 3.0
 usb1 at xhci0: USB revision 2.0
 Intel Core 4G (mobile) MEI (miscellaneous communications, revision 0x04) 
 at pci0 dev 22 function 0 not configured
 hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio1: interrupting at msi2 vec 0
 hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
 hdafg1 at hdaudio1: Realtek product 0283
 hdafg1: autoconfiguration error: pin 21 has wrong direction for 01
 hdafg1: 0ch/0ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 
 PCM16*
 audio1 at hdafg1: playback, capture, full duplex, independent
 audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
 audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
 spkr1 at audio1: PC Speaker (synthesized)
 wsbell at spkr1 not configured
 ppb0 at pci0 dev 28 function 0: Intel Core 4G (mobile) PCIe (rev. 0xe4)
 ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> 
 x1 @ 5.0GT/s
 ppb0: link is x1 @ 2.5GT/s
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet 
 (rev. 0x0c)
 re0: interrupting at msix3 vec 0
 re0: RTL8168G/8111G (0x4c00)
 re0: Ethernet address 2c:60:0c:b7:92:e4
 re0: using 256 tx descriptors
 rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
 ppb1 at pci0 dev 28 function 1: Intel Core 4G (mobile) PCIe (rev. 0xe4)
 ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> 
 x1 @ 5.0GT/s
 ppb1: link is x1 @ 2.5GT/s
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 Atheros Communications AR9462 Wireless LAN (miscellaneous network, 
 revision 0x01) at pci2 dev 0 function 0 not configured
 ppb2 at pci0 dev 28 function 2: Intel Core 4G (mobile) PCIe (rev. 0xe4)
 ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> 
 x2 @ 5.0GT/s
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 pcib0 at pci0 dev 31 function 0: Intel Core 4G (mobile) LPC (rev. 0x04)
 ahcisata0 at pci0 dev 31 function 2: Intel Core 4G (mobile) SATA 
 Controller (AHCI) (rev. 0x04)
 ahcisata0: 64-bit DMA
 ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 
 0xdf34ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SMPS,SNCQ,S64A>
 ahcisata0: interrupting at msi4 vec 0
 atabus0 at ahcisata0 channel 0
 ichsmb0 at pci0 dev 31 function 3: Intel Core 4G (mobile) SMBus (rev. 0x04)
 ichsmb0: interrupting at ioapic0 pin 18
 iic0 at ichsmb0: I2C bus
 Intel Core 4G (mobile) Thermal (miscellaneous DASP, revision 0x04) at 
 pci0 dev 31 function 6 not configured
 isa0 at pcib0
 pcppi0 at isa0 port 0x61
 spkr2 at pcppi0: PC Speaker
 wsbell at spkr2 not configured
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 attimer1: attached to pcppi0
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: FFH, lat   0 us, pow  1000 mW
 acpicpu0: C2: FFH, lat  67 us, pow   900 mW
 acpicpu0: C3: FFH, lat 148 us, pow   700 mW
 acpicpu0: P0: FFH, lat  10 us, pow 15000 mW, 1400 MHz
 acpicpu0: P1: FFH, lat  10 us, pow 12559 mW, 1200 MHz
 acpicpu0: P2: FFH, lat  10 us, pow 10217 mW, 1000 MHz
 acpicpu0: P3: FFH, lat  10 us, pow  7982 mW,  800 MHz
 acpicpu0: T0: FFH, lat   1 us, pow  1000 mW, 100 %
 acpicpu0: T1: FFH, lat   1 us, pow   940 mW,  94 %
 acpicpu0: T2: FFH, lat   1 us, pow   880 mW,  88 %
 acpicpu0: T3: FFH, lat   1 us, pow   820 mW,  82 %
 acpicpu0: T4: FFH, lat   1 us, pow   760 mW,  75 %
 acpicpu0: T5: FFH, lat   1 us, pow   700 mW,  69 %
 acpicpu0: T6: FFH, lat   1 us, pow   640 mW,  63 %
 acpicpu0: T7: FFH, lat   1 us, pow   580 mW,  57 %
 acpicpu0: T8: FFH, lat   1 us, pow   520 mW,  50 %
 acpicpu0: T9: FFH, lat   1 us, pow   460 mW,  44 %
 acpicpu0: T10: FFH, lat   1 us, pow   400 mW,  38 %
 acpicpu0: T11: FFH, lat   1 us, pow   340 mW,  32 %
 acpicpu0: T12: FFH, lat   1 us, pow   280 mW,  25 %
 acpicpu0: T13: FFH, lat   1 us, pow   220 mW,  19 %
 acpicpu0: T14: FFH, lat   1 us, pow   160 mW,  13 %
 coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
 acpicpu1 at cpu1: ACPI CPU
 coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 1396768000 Hz quality 3000
 uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 
 3.00/1.00, addr 0
 uhub0: 4 ports with 4 removable, self powered
 uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 
 2.00/1.00, addr 0
 uhub1: 8 ports with 8 removable, self powered
 IPsec: Initialized Security Association Processing.
 tpm0: read 8 bytes, expected 10
 tpm0: deactivating entropy source
 ahcisata0 port 0: device present, speed: 6.0Gb/s
 uhidev0 at uhub1 port 3 configuration 1 interface 0
 uhidev0: CHICONY (0x04f2) USB Keyboard (0x0833), rev 1.10/1.11, addr 1, 
 iclass 3/1
 ukbd0 at uhidev0
 wskbd0 at ukbd0: console keyboard, using wsdisplay0
 uhidev1 at uhub1 port 3 configuration 1 interface 1
 uhidev1: CHICONY (0x04f2) USB Keyboard (0x0833), rev 1.10/1.11, addr 1, 
 iclass 3/0
 uhidev1: 3 report ids
 uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
 uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
 ubt0 at uhub1 port 4
 ubt0: <2147483624><2147483520><2147483529> (0x04ca) 
 <2147483624><2147483520><2147483529> (0x3007), rev 1.10/0.01, addr 2
 wd0 at atabus0 drive 0
 wd0: <SanDisk SSD U110 16GB>
 wd0: drive supports 1-sector PIO transfers, LBA48 addressing
 wd0: 15272 MB, 31029 cyl, 16 head, 63 sec, 512 bytes/sect x 31277232 sectors
 wd0: GPT GUID: ab842c07-d989-4572-92d4-3faa9f70399d
 dk0 at wd0: "01b2d171-4276-47b4-b31c-a10f6a6c4070", 262144 blocks at 64, 
 type: msdos
 dk1 at wd0: "999ca1ce-3017-4285-9778-07c83377f7a9", 28917824 blocks at 
 262208, type: ffs
 dk2 at wd0: "f9eb9c83-fd6b-4782-bbcb-3cc9c6f3e038", 2097152 blocks at 
 29180032, type: swap
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
 (Ultra/133), NCQ (32 tags)
 wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
 (Ultra/133) (using DMA), NCQ (31 tags)
 swwdog0: software watchdog initialized
 WARNING: 1 error while detecting hardware; check system log.
 boot device: wd0
 root on dk1 dumps on dk2
 root file system type: ffs
 kern.module.path=/stand/amd64/10.0/modules
 wsdisplay0: screen 1 added (default, vt100 emulation)
 wsdisplay0: screen 2 added (default, vt100 emulation)
 wsdisplay0: screen 3 added (default, vt100 emulation)
 wsdisplay0: screen 4 added (default, vt100 emulation)
 
 On 10/8/2024 11:40 PM, Rin Okuyama via gnats wrote:
 > The following reply was made to PR port-amd64/58732; it has been noted by GNATS.
 >
 > From: Rin Okuyama <rokuyama.rk%gmail.com@localhost>
 > To: gnats-bugs%netbsd.org@localhost, port-amd64-maintainer%netbsd.org@localhost,
 >   gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost, bjzuber%icloud.com@localhost
 > Cc:
 > Subject: Re: port-amd64/58732: i915drmkms black screen on boot
 > Date: Wed, 9 Oct 2024 13:35:10 +0900
 >
 >   - Can you share /var/run/dmesg.boot for successful boot?
 >   - What happens if additional `userconf disable acpivga*` for
 >      bootloader?
 >   
 >   Thanks,
 >   rin
 >
Home | Main Index | Thread Index | Old Index