Re: kern/58037: faster SD cards not working on Hummingboard Pulse

To: kern-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,martin%NetBSD.org@localhost
Subject: Re: kern/58037: faster SD cards not working on Hummingboard Pulse
From: Martin Husemann <martin%duskware.de@localhost>
Date: Thu, 14 Mar 2024 15:55:02 +0000 (UTC)
The following reply was made to PR kern/58037; it has been noted by GNATS.

From: Martin Husemann <martin%duskware.de@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: kern/58037: faster SD cards not working on Hummingboard Pulse
Date: Thu, 14 Mar 2024 16:50:59 +0100

 Here is the dmesg for the device.
 
 Martin
 
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
     2024
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 10.99.10 (GENERIC64) #427: Thu Mar 14 12:31:00 CET 2024
 	martin%seven-days-to-the-wolves.aprisoft.de@localhost:/work/src/sys/arch/evbarm/compile/GENERIC64
 total memory = 3052 MB
 avail memory = 2941 MB
 timecounter: Timecounters tick every 10.000 msec
 Kernelized RAIDframe activated
 armfdt0 (root)
 simplebus0 at armfdt0: SolidRun i.MX8MQ HummingBoard Pulse
 simplebus1 at simplebus0
 cpus0 at simplebus0
 psci0 at simplebus0: PSCI 1.1
 simplebus2 at simplebus0
 cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0
 cpu0: package 0, core 0, smt 0
 cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
 cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
 cpu0: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
 cpu0: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
 cpu0: L1 32KB/64B 4-way (128 set) PIPT Data cache
 cpu0: L2 1024KB/64B 16-way (1024 set) PIPT Unified cache
 cpu0: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID
 cpu0: auxID=0x11120, GICv3, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
 cpufreqdt0 at cpu0
 cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1
 cpu1: package 0, core 1, smt 0
 cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
 cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
 cpu1: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
 cpu1: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
 cpu1: L1 32KB/64B 4-way (128 set) PIPT Data cache
 cpu1: L2 1024KB/64B 16-way (1024 set) PIPT Unified cache
 cpu1: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID
 cpu1: auxID=0x11120, GICv3, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
 cpufreqdt1 at cpu1
 cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2
 cpu2: package 0, core 2, smt 0
 cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
 cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
 cpu2: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
 cpu2: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
 cpu2: L1 32KB/64B 4-way (128 set) PIPT Data cache
 cpu2: L2 1024KB/64B 16-way (1024 set) PIPT Unified cache
 cpu2: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID
 cpu2: auxID=0x11120, GICv3, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
 cpufreqdt2 at cpu2
 cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3
 cpu3: package 0, core 3, smt 0
 cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
 cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
 cpu3: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
 cpu3: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
 cpu3: L1 32KB/64B 4-way (128 set) PIPT Data cache
 cpu3: L2 1024KB/64B 16-way (1024 set) PIPT Unified cache
 cpu3: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID
 cpu3: auxID=0x11120, GICv3, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
 cpufreqdt3 at cpu3
 simplebus3 at simplebus1
 simplebus4 at simplebus1
 simplebus5 at simplebus1
 simplebus6 at simplebus1
 syscon0 at simplebus3: System Controller Registers
 gicvthree0 at simplebus1: GICv3
 gicvthree0: iidr 0x0001143b, cpuif non-secure, dist non-secure, priority shift 4, pmr shift 4, quirks 0
 syscon1 at simplebus3: System Controller Registers
 fclock0 at simplebus0: 32768 Hz fixed clock (ckil)
 fclock1 at simplebus0: 25000000 Hz fixed clock (osc_25m)
 fclock2 at simplebus0: 27000000 Hz fixed clock (osc_27m)
 fclock3 at simplebus0: 133000000 Hz fixed clock (clk_ext1)
 fclock4 at simplebus0: 133000000 Hz fixed clock (clk_ext2)
 fclock5 at simplebus0: 133000000 Hz fixed clock (clk_ext3)
 fclock6 at simplebus0: 133000000 Hz fixed clock (clk_ext4)
 syscon2 at simplebus3: System Controller Registers
 syscon3 at simplebus3: System Controller Registers
 syscon4 at simplebus3: System Controller Registers
 imx7gpc0 at simplebus3: General Power Controller
 imx8mqccm0 at simplebus3: Clock Control Module
 imxiomux0 at simplebus3: IOMUX Controller
 gtmr0 at simplebus0: Generic Timer
 gtmr0: interrupting on GICv3 irq 27
 armgtmr0 at gtmr0: Generic Timer (8333 kHz, virtual)
 timecounter: Timecounter "armgtmr0" frequency 8333333 Hz quality 500
 imxgpio0 at simplebus3: GPIO (gpio@30200000)
 imxgpio0: interrupting on irq 96
 imxgpio0: interrupting on irq 97
 imxgpio0: interrupts 16384..16415
 gpio0 at imxgpio0: 32 pins
 imxgpio1 at simplebus3: GPIO (gpio@30210000)
 imxgpio1: interrupting on irq 98
 imxgpio1: interrupting on irq 99
 imxgpio1: interrupts 16416..16447
 gpio1 at imxgpio1: 32 pins
 imxgpio2 at simplebus3: GPIO (gpio@30220000)
 imxgpio2: interrupting on irq 100
 imxgpio2: interrupting on irq 101
 imxgpio2: interrupts 16448..16479
 gpio2 at imxgpio2: 32 pins
 imxgpio3 at simplebus3: GPIO (gpio@30230000)
 imxgpio3: interrupting on irq 102
 imxgpio3: interrupting on irq 103
 imxgpio3: interrupts 16480..16511
 gpio3 at imxgpio3: 32 pins
 imxgpio4 at simplebus3: GPIO (gpio@30240000)
 imxgpio4: interrupting on irq 104
 imxgpio4: interrupting on irq 105
 imxgpio4: interrupts 16512..16543
 gpio4 at imxgpio4: 32 pins
 imxi2c0 at simplebus4
 iic0 at imxi2c0: I2C bus
 pmic (fsl,pfuze100) at iic0 addr 0x08 not configured
 seeprom0 at iic0 addr 0x50: eeprom
 seeprom0: autoconfiguration error: invalid size specified; assuming 2KB (16Kb)
 fregulator0 at simplebus0: VSD_3V3
 imxi2c1 at simplebus4
 iic1 at imxi2c1: I2C bus
 seeprom1 at iic1 addr 0x50: usb-typec
 seeprom1: autoconfiguration error: invalid size specified; assuming 2KB (16Kb)
 imxuart0 at simplebus4, 25000000 Hz
 imxuart0: interrupting on irq 58
 imxuart0: console
 imxuart1 at simplebus4, 25000000 Hz
 imxuart1: interrupting on irq 60
 imxuart2 at simplebus4, 25000000 Hz
 imxuart2: interrupting on irq 59
 imxi2c2 at simplebus4
 iic2 at imxi2c2: I2C bus
 seeprom2 at iic2 addr 0x57: eeprom: size 256
 rtc (abracon,ab1805) at iic2 addr 0x69 not configured
 imxuart3 at simplebus4, 25000000 Hz
 imxuart3: interrupting on irq 61
 fregulator1 at simplebus0: vdd_3v3
 fregulator2 at simplebus0: v_5v0
 imx8mqusbphy0 at simplebus1: USB PHY
 imx8mqusbphy1 at simplebus1: USB PHY
 /opp-table at simplebus0 not configured
 /soc@0/bus@30000000/tmu@30260000 at simplebus3 not configured
 /soc@0/gpu@38000000 at simplebus1 not configured
 /soc@0/bus@30000000/sdma@302c0000 at simplebus3 not configured
 /soc@0/bus@30800000/sdma@30bd0000 at simplebus4 not configured
 /soc@0/interconnect@32700000 at simplebus1 not configured
 /soc@0/bus@30000000/syscon@30340000/mux-controller at syscon2 not configured
 xhci0 at simplebus1autoconfiguration error: : cannot switch 'otg' mode to host
 enet0 at simplebus4: Gigabit Ethernet Controller
 enet0: interrupting on irq 150
 enet0: interrupting on irq 151
 enet0: interrupting on irq 152
 enet0: autoconfiguration error: couldn't find phy reset gpios
 enet0: autoconfiguration error: cannot get mac address. set randomly
 enet0: Ethernet address 00:00:41:a7:3a:f1
 atphy0 at enet0 phy 4: Atheros AR8035 10/100/1000 PHY, rev. 4
 atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto
 /soc@0/memory-controller@3d400000 at simplebus1 not configured
 /soc@0/bus@30000000/watchdog@30280000 at simplebus3 not configured
 /soc@0/bus@30000000/snvs@30370000/snvs-rtc-lp at syscon1 not configured
 /soc@0/bus@30400000/timer@306a0000 at simplebus5 not configured
 /soc@0/bus@30800000/crypto@30900000 at simplebus4 not configured
 /soc@0/bus@30800000/mailbox@30aa0000 at simplebus4 not configured
 sdhc0 at simplebus4: SDMMC (400000 kHz)
 sdhc0: interrupting on irq 54
 sdhc0: SDHC 3.0, rev 0, caps <07ffb407/00000005>, 32-bit ADMA2, 180000 kHz, HS SDR50 DDR50 1.8V 3.0V 3.3V, re-tuning mode 1, 4096 byte blocks
 sdmmc0 at sdhc0 slot 0
 sdhc1 at simplebus4: SDMMC (200000 kHz)
 sdhc1: interrupting on irq 55
 sdhc1: SDHC 3.0, rev 0, caps <07ffb407/00000005>, 32-bit ADMA2, 180000 kHz, HS SDR50 DDR50 1.8V 3.0V 3.3V, re-tuning mode 1, 4096 byte blocks
 sdmmc1 at sdhc1 slot 0
 /soc@0/bus@30800000/spi@30bb0000 at simplebus4 not configured
 /soc@0/bus@32c00000/interrupt-controller@32e2d000 at simplebus6 not configured
 xhci1 at simplebus1: DesignWare USB3 XHCI (rev. 3.10a)
 xhci1: interrupting on irq 73
 xhci1: xHCI version 1.10
 usb0 at xhci1: USB revision 3.0
 usb1 at xhci1: USB revision 2.0
 /soc@0/video-codec@38300000 at simplebus1 not configured
 armpmu0 at simplebus0: Performance Monitor Unit
 /soc@0/ddr-pmu@3d800000 at simplebus1 not configured
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 cpufreqdt0: autoconfiguration error: couldn't acquire clock
 cpufreqdt1: autoconfiguration error: couldn't acquire clock
 cpufreqdt2: autoconfiguration error: couldn't acquire clock
 cpufreqdt3: autoconfiguration error: couldn't acquire clock
 uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
 uhub0: 1 port with 1 removable, self powered
 uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
 uhub1: 1 port with 1 removable, self powered
 armpmu0: interrupting on GICv3 irq 23
 WARNING: system needs entropy for security; see entropy(7)
 IPsec: Initialized Security Association Processing.
 sdmmc1: SD card status: 4-bit, C10
 ld1 at sdmmc1: <0xfe:0x3432:SD16G:0x20:0x0000ea76:0x153>
 ld1: 7680 MB, 3900 cyl, 64 head, 63 sec, 512 bytes/sect x 15728640 sectors
 ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz
 uhub2 at uhub1 port 1: vendor 04b4 (0x04b4) product 6502 (0x6502), class 9/0, rev 2.10/50.10, addr 1
 uhub2: multiple transaction translators
 uhub3 at uhub0 port 1: vendor 04b4 (0x04b4) product 6500 (0x6500), class 9/0, rev 3.00/50.10, addr 2
 uhub2: 4 ports with 4 removable, self powered
 uhub3: 4 ports with 4 removable, self powered
 swwdog0: software watchdog initialized
 WARNING: 9 errors while detecting hardware; check system log.
 boot device: ld1
 root on ld1a dumps on ld1b
 root file system type: ffs
 kern.module.path=/stand/evbarm/10.99.10/modules
 WARNING: no TOD clock present
 WARNING: using filesystem time
 WARNING: CHECK AND RESET THE DATE!
 entropy: ready
Prev by Date: Re: port-evbarm/58035: [RB] evbarm/earmv6: sshramdisk probably has firmware files in a wrong place
Next by Date: Re: port-evbarm/58035: [RB] evbarm/earmv6: sshramdisk probably has firmware files in a wrong place
Previous by Thread: kern/58037: faster SD cards not working on Hummingboard Pulse
Indexes:
Home | Main Index | Thread Index | Old Index