Number: 57794
Category: kern
Synopsis: only a small area of the touchpad works after kernel update
Confidential: no
Severity: non-critical
Priority: low
Responsible: kern-bug-people
State: open
Class: sw-bug
Submitter-Id: net
Arrival-Date: Mon Dec 25 20:15:00 +0000 2023
Originator: Guilherme Janczak
Release: 10.0RC1
Organization:
Environment:
NetBSD jan-evo-nbsd 10.0_RC1 NetBSD 10.0_RC1 (GENERIC) #0: Sun Nov 5 18:30:08 UTC 2023 mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC i386
Description:
Using the 9.3 kernel, the touchpad works flawlessly.
Using the 10.0RC1 kernel, there is only a small area on the left edge of the touchpad where moving my finger around moves the Xorg cursor. Moving my finger outside of this area does nothing.
I should point out that I'm using both kernels with the 9.3 userland. My window manager is bspwm.
Here's some more info:
$ sysctl hw.synaptics
hw.synaptics.up_down_emulation = 3
hw.synaptics.up_down_motion_delta = 1
hw.synaptics.gesture_move = 200
hw.synaptics.gesture_length = 20
hw.synaptics.edge_left = 836
hw.synaptics.edge_right = 2008
hw.synaptics.edge_top = 2074
hw.synaptics.edge_bottom = 2050
hw.synaptics.edge_motion_delta = 32
hw.synaptics.finger_high = 35
hw.synaptics.finger_low = 20
hw.synaptics.two_fingers_emulation = 0
hw.synaptics.scale_x = 8
hw.synaptics.scale_y = 8
hw.synaptics.scale_z = 32
hw.synaptics.max_speed_x = 32
hw.synaptics.max_speed_y = 32
hw.synaptics.max_speed_z = 2
hw.synaptics.movement_threshold = 4
hw.synaptics.movement_enable = 1
hw.synaptics.button_region_movement_enable = 1
hw.synaptics.button_boundary = 2050
hw.synaptics.button2_edge = 1226
hw.synaptics.button3_edge = 1617
hw.synaptics.aux_mid_button_scroll = 1
hw.synaptics.vert_scroll_percent = 0
hw.synaptics.horizontal_scroll_percent = 0
hw.synaptics.button_region_percent = 0
hw.synaptics.debug = 0
Here's a full dmesg with the 9.3 kernel:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021, 2022
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.3 (GENERIC) #0: Thu Aug 4 15:30:37 UTC 2022
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 1023 MB
avail memory = 986 MB
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
autoconfiguration error: BIOS32 entry point outside allowable range
Compaq Evo N1000v (F.0D)
mainbus0 (root)
ACPI: RSDP 0x00000000000F9970 000014 (v00 COMPAQ)
ACPI: RSDT 0x000000003FFF0C84 00002C (v01 COMPAQ CPQ004A 09050320 CPQ 00000001)
ACPI: FACP 0x000000003FFF0C00 000084 (v02 COMPAQ CPQ004A 00000002 CPQ 00000001)
ACPI: DSDT 0x000000003FFF0CB0 005987 (v01 COMPAQ EVON800 00010000 MSFT 0100000E)
ACPI: FACS 0x000000003FFFBE80 000040
ACPI: SSDT 0x000000003FFF6637 000343 (v01 COMPAQ CPQCroDT 00001001 MSFT 0100000E)
ACPI: 2 ACPI AML tables successfully acquired and loaded
cpu0 at mainbus0
cpu0: Intel(R) Pentium(R) 4 CPU 2.20GHz, id 0xf24
cpu0: package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <COMPAQ,CPQ004A ,09050320>, AslId <CPQ ,00000001>
C0B7: ACPI: Found matching pin for 0.31.INTA at func 1: 11
C0B6: ACPI: Found matching pin for 0.31.INTB at func 5: 5
C0B5: ACPI: Found matching pin for 1.0.INTA at func 0: 11
C0B6: ACPI: Found matching pin for 2.4.INTA at func 0: 5
C0B7: ACPI: Found matching pin for 2.5.INTA at func 0: 11
C0B8: ACPI: Found matching pin for 2.6.INTA at func 0: 11
C0B9: ACPI: Found matching pin for 2.8.INTA at func 0: 10
C0B9: ACPI: Found matching pin for 2.14.INTA at func 0: 10
C0B9: ACPI: Found matching pin for 2.14.INTB at func 1: 10
C0B9: ACPI: Found matching pin for 2.14.INTC at func 2: 10
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiec0 at acpi0 (C0CF, PNP0C09): io 0x62,0x66
C00A (PNP0C01) at acpi0 not configured
C13E (PNP0501) at acpi0 not configured
C143 (PNP0700) at acpi0 not configured
C15B (PNP0401) at acpi0 not configured
C160 (PNP0C04) at acpi0 not configured
attimer1 at acpi0 (C161, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (C162, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (C164, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (C165, SYN0100) (aux port): irq 12
C1B0 (PNP0C02) at acpi0 not configured
C1AD (PNP0C02) at acpi0 not configured
acpibat0 at acpi0 (C11E, PNP0C0A-1): ACPI Battery
acpiacad0 at acpi0 (C11B, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (C17A, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (C120, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (C11F, PNP0C0D): ACPI Lid Switch
acpifan0 at acpi0 (C1D7, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (C1D8, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (C1D9, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (C1DA, PNP0C0B-3): ACPI Fan
acpitz0 at acpi0 (TZ1)
acpitz0: active cooling level 0: 61.0C
acpitz0: active cooling level 1: 56.0C
acpitz0: active cooling level 2: 46.0C
acpitz0: active cooling level 3: 40.0C
acpitz0: levels: critical 75.0 C, passive 75.0 C
acpitz1 at acpi0 (TZ2)
acpitz1: active cooling level 0: 61.0C
acpitz1: active cooling level 1: 51.0C
acpitz1: active cooling level 2: 45.0C
acpitz1: levels: critical 87.0 C, passive 85.0 C
acpitz2 at acpi0 (TZ3)
acpitz2: levels: critical 70.0 C, passive 55.0 C, passive cooling
acpifan4 at acpi0 (C1E4, PNP0C0B-4): ACPI Fan
acpifan5 at acpi0 (C1E5, PNP0C0B-5): ACPI Fan
acpifan6 at acpi0 (C1E6, PNP0C0B-6): ACPI Fan
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 6 GPEs in block 10 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.8
pms0: Up/down buttons, Palm detect, One button click pad, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 1a30 (rev. 0x04)
agp0 at pchb0: aperture at 0x60000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 8086 product 1a31 (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
genfb0 at pci1 dev 0 function 0: vendor 1002 product 4c57 (rev. 0x00)
genfb0: framebuffer at 0x48000000, size 1024x768, depth 8, stride 1024
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
ppb1 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
vendor 14f1 product 2f00 (miscellaneous communications, revision 0x01) at pci2 dev 4 function 0 not configured
fwohci0 at pci2 dev 5 function 0: vendor 104c product 8023 (rev. 0x00)
fwohci0: interrupting at irq 11
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:08:02:71:9c:cf:85:37
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: Clear PME# now
cbb0 at pci2 dev 6 function 0: vendor 104c product ac50 (rev. 0x02)
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller (rev. 0x42)
fxp0: interrupting at irq 10
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:08:02:cf:88:8f
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci2 dev 14 function 0: vendor 1033 product 0035 (rev. 0x41)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci2 dev 14 function 1: vendor 1033 product 0035 (rev. 0x41)
ohci1: interrupting at irq 10
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci2 dev 14 function 2: vendor 1033 product 00e0 (rev. 0x02)
ehci0: interrupting at irq 10
ehci0: EHCI version 0.95
ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
cbb0: cacheline 0x8 lattimer 0x42
cbb0: bhlc 0x24208
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 248c (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 2/37 seconds
ichlpcib0: SpeedStep enabled
piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 5
auich0: ac97: Analog Devices AD1886A codec; headphone, Analog Devices Phat Stereo
auich0: ac97: ext id 0x5<SPDIF,VRA>
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
auich0: measured ac97 link rate at 47298 Hz, will use 48000 Hz
audio0 at auich0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK3018GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 28615 MB, 58140 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N, , GW01> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/9.3/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
Here's a full dmesg with the 10.0RC1 kernel:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.0_RC1 (GENERIC) #0: Sun Nov 5 18:30:08 UTC 2023
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 1023 MB
avail memory = 981 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
autoconfiguration error: BIOS32 entry point outside allowable range
mainbus0 (root)
ACPI: RSDP 0x00000000000F9970 000014 (v00 COMPAQ)
ACPI: RSDT 0x000000003FFF0C84 00002C (v01 COMPAQ CPQ004A 09050320 CPQ 00000001)
ACPI: FACP 0x000000003FFF0C00 000084 (v02 COMPAQ CPQ004A 00000002 CPQ 00000001)
ACPI: DSDT 0x000000003FFF0CB0 005987 (v01 COMPAQ EVON800 00010000 MSFT 0100000E)
ACPI: FACS 0x000000003FFFBE80 000040
ACPI: SSDT 0x000000003FFF6637 000343 (v01 COMPAQ CPQCroDT 00001001 MSFT 0100000E)
ACPI: 2 ACPI AML tables successfully acquired and loaded
cpu0 at mainbus0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Pentium(R) 4 CPU 2.20GHz, id 0xf24
cpu0: node 0, package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <COMPAQ,CPQ004A ,09050320>, AslId <CPQ ,00000001>
C0B7: ACPI: Found matching pin for 0.31.INTA at func 1: 11
C0B6: ACPI: Found matching pin for 0.31.INTB at func 5: 5
C0B5: ACPI: Found matching pin for 1.0.INTA at func 0: 11
C0B6: ACPI: Found matching pin for 2.4.INTA at func 0: 5
C0B7: ACPI: Found matching pin for 2.5.INTA at func 0: 11
C0B8: ACPI: Found matching pin for 2.6.INTA at func 0: 11
C0B9: ACPI: Found matching pin for 2.8.INTA at func 0: 10
C0B9: ACPI: Found matching pin for 2.14.INTA at func 0: 10
C0B9: ACPI: Found matching pin for 2.14.INTB at func 1: 10
C0B9: ACPI: Found matching pin for 2.14.INTC at func 2: 10
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiec0 at acpi0 (C0CF, PNP0C09): io 0x62,0x66
C00A (PNP0C01) at acpi0 not configured
C13E (PNP0501) at acpi0 not configured
C143 (PNP0700) at acpi0 not configured
C15B (PNP0401) at acpi0 not configured
C160 (PNP0C04) at acpi0 not configured
attimer1 at acpi0 (C161, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (C162, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (C164, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (C165, SYN0100) (aux port): irq 12
acpibat0 at acpi0 (C11E, PNP0C0A-1): ACPI Battery
acpiacad0 at acpi0 (C11B, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (C17A, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (C120, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (C11F, PNP0C0D): ACPI Lid Switch
acpifan0 at acpi0 (C1D7, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (C1D8, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (C1D9, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (C1DA, PNP0C0B-3): ACPI Fan
acpitz0 at acpi0 (TZ1)
acpitz0: active cooling level 0: 61.0C
acpitz0: active cooling level 1: 56.0C
acpitz0: active cooling level 2: 46.0C
acpitz0: active cooling level 3: 40.0C
acpitz0: levels: critical 75.0 C, passive 75.0 C
acpitz1 at acpi0 (TZ2)
acpitz1: active cooling level 0: 61.0C
acpitz1: active cooling level 1: 51.0C
acpitz1: active cooling level 2: 45.0C
acpitz1: levels: critical 87.0 C, passive 85.0 C
acpitz2 at acpi0 (TZ3)
acpitz2: levels: critical 70.0 C, passive 55.0 C, passive cooling
acpifan4 at acpi0 (C1E4, PNP0C0B-4): ACPI Fan
acpifan5 at acpi0 (C1E5, PNP0C0B-5): ACPI Fan
acpifan6 at acpi0 (C1E6, PNP0C0B-6): ACPI Fan
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 6 GPEs in block 10 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.8
pms0: Up/down buttons, Palm detect, One button click pad, Multi-finger, Reports max, Reports min
pms0: Probed max coordinates right: 2008, top: 2074
pms0: Probed min coordinates left: 836, bottom: 2050
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82845 Host (rev. 0x04)
agp0 at pchb0: aperture at 0x60000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
genfb0 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (rev. 0x00)
genfb0: framebuffer at 0x48000000, size 1024x768, depth 8, stride 1024
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
Conexant Systems product 2f00 (miscellaneous communications, revision 0x01) at pci2 dev 4 function 0 not configured
fwohci0 at pci2 dev 5 function 0: Texas Instruments TSB43AA22/A IEEE 1394 Host Controller (rev. 0x00)
fwohci0: interrupting at irq 11
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:08:02:71:9c:cf:85:37
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: Clear PME# now
cbb0 at pci2 dev 6 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x02)
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller (rev. 0x42)
fxp0: interrupting at irq 10
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:08:02:cf:88:8f
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci2 dev 14 function 0: NEC USB Host Controller (rev. 0x41)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci2 dev 14 function 1: NEC USB Host Controller (rev. 0x41)
ohci1: interrupting at irq 10
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci2 dev 14 function 2: NEC USB2 Host Controller (rev. 0x02)
ehci0: 32-bit DMA
ehci0: interrupting at irq 10
ehci0: EHCI version 0.95
ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
ehci0: Using DMA subregion for control data structures
usb2 at ehci0: USB revision 2.0
cbb0: cacheline 0x8 lattimer 0x42
cbb0: bhlc 0x24208
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: Intel 82801CAM LPC Interface Bridge (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 2/37 seconds
ichlpcib0: SpeedStep enabled
piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 5
auich0: ac97: Analog Devices AD1886A codec; headphone, Analog Devices Phat Stereo
auich0: ac97: ext id 0x5<SPDIF,VRA>
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
auich0: measured ac97 link rate at 47247 Hz, will use 48000 Hz
audio0 at auich0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK3018GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 28615 MB, 58140 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N, , GW01> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/10.0/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
How-To-Repeat:
Fix: