re: port-i386/57662: StarTech ICUSB23208FD 8-Port USB-to-Serial Adapter Hub fails on Alix with NetBSD/i386 9.3

[matthew green <mrg%eterna.com.au@localhost>]

The following reply was made to PR port-i386/57662; it has been noted by GNATS.

From: matthew green <mrg%eterna.com.au@localhost>
To: Alexander Schreiber <als%thangorodrim.ch@localhost>
Cc: port-i386-maintainer%netbsd.org@localhost, gnats-admin%netbsd.org@localhost,
    netbsd-bugs%netbsd.org@localhost, gnats-bugs%netbsd.org@localhost, riastradh%netbsd.org@localhost
Subject: re: port-i386/57662: StarTech ICUSB23208FD 8-Port USB-to-Serial Adapter Hub fails on Alix with NetBSD/i386 9.3
Date: Sat, 28 Oct 2023 09:25:56 +1100

 OK, this at least agrees with what i thought was happening.  from
 
 > https://www.thangorodrim.ch/tmp/NetBSD10BETA_serial_vmstat-usbhist
 
 all the useful stuff is near the very bottom, you can see the parts
 of the 2nd to last successful transfer:
 
 1698435122.516436 usbd_transfer#608@0: called: xfer =3D 0xc217fe78, flags =
 =3D 0x2, pipe =3D 0xc3000100, running =3D 0
 1698435122.516442 ehci_device_ctrl_start#82@0: called!
 ...
 1698435122.516509 usbd_xfer_schedule_timeout#604@0: called: xfer 0xc217fe7=
 8 timeout 5000ms set 0 reset 0
 1698435122.516515 usbd_transfer#608@0: <- sleeping on xfer 0xc217fe78
 1698435122.516796 ehci_intr#609@0: called!
 ...
 1698435122.516958 usb_transfer_complete#613@0: <- done xfer 0xc217fe78, wa=
 keup
 
 but the next one doesn't get this far:
 
 1698435126.993608 usbd_transfer#609@0: called: xfer =3D 0xc217fe78, flags =
 =3D 0x2, pipe =3D 0xc3000100, running =3D 0
 1698435126.993612 ehci_device_ctrl_start#83@0: called!
 ...
 1698435126.993667 usbd_xfer_schedule_timeout#605@0: called: xfer 0xc217fe7=
 8 timeout 5000ms set 0 reset 0
 1698435126.993672 usbd_transfer#609@0: <- sleeping on xfer 0xc217fe78
 1698435131.987617 usbd_xfer_timeout#1@0: called: xfer 0xc217fe78 status 1
 
 but here it should complete with failure but the next logs are:
 
 1698435131.987621 usbd_xfer_probe_timeout#1@0: called: xfer 0xc217fe78 tim=
 eout 5000ms set 1 reset 0
 1698435131.987625 usbd_xfer_probe_timeout#1@0: xfer 0xc217fe78 timing out
 1698435131.987628 usbd_xfer_timeout#1@0: xfer 0xc217fe78 schedule timeout =
 task
 1698435131.987631 usb_add_task#1@0: called!
 1698435131.987652 usbd_xfer_timeout_task#1@0: called: xfer 0xc217fe78 stat=
 us 1
 1698435131.987655 usbd_xfer_probe_timeout#2@0: called: xfer 0xc217fe78 tim=
 eout 5000ms set 1 reset 0
 1698435131.987658 usbd_xfer_probe_timeout#2@0: xfer 0xc217fe78 timing out
 1698435131.987661 usbd_xfer_timeout_task#1@0: xfer 0xc217fe78 timed out
 1698435131.987664 ehci_abortx#2@0: called!
 1698435131.987667 ehci_abortx#2@0: xfer=3D0xc217fe78 pipe=3D0xc3000100
 1698435131.987675 ehci_sync_hc#8@0: called!
 1698435131.987679 ehci_sync_hc#8@0: cmd =3D 0x00020071 sts =3D 0x0000c008
 
 there's no completion event here, even though it timed out.  Taylor,
 any ideas off hand?
 
 
 .mrg.