Re: port-evbarm/57551

[Christian Groessler <chris%groessler.org@localhost>]

The following reply was made to PR port-evbarm/57551; it has been noted by GNATS.

From: Christian Groessler <chris%groessler.org@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: port-evbarm/57551
Date: Tue, 1 Aug 2023 19:00:40 +0200

 System is a Raspberri Pi 3+
 
 dmesg:
 
 [     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 
 2003,
 [     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 
 2012, 2013,
 [     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 
 2022, 2023
 [     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
 [     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [     1.000000]     The Regents of the University of California.  All 
 rights reserved.
 
 [     1.000000] NetBSD 10.0_BETA (CPGENERIC) #0: Wed Jul 19 22:47:30 
 CEST 2023
 [     1.000000] 
 chris@raspi3c:/net/socke/tmp/netbsd/raspi3c/obj-10/net/socke/tmp/netbsd/raspi3c/src-10/sys/arch/evbarm/compile/CPGENERIC
 [     1.000000] total memory = 948 MB
 [     1.000000] avail memory = 912 MB
 [     1.000000] timecounter: Timecounters tick every 10.000 msec
 [     1.000000] Kernelized RAIDframe activated
 [     1.000000] armfdt0 (root)
 [     1.000000] simplebus0 at armfdt0: Raspberry Pi 3 Model B Plus Rev 1.3
 [     1.000000] simplebus1 at simplebus0
 [     1.000000] simplebus2 at simplebus0
 [     1.000000] cpus0 at simplebus0
 [     1.000000] simplebus3 at simplebus0
 [     1.000000] cpu0 at cpus0: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
 [     1.000000] cpu0: DC enabled IC enabled WB enabled EABT branch 
 prediction enabled
 [     1.000000] cpu0: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
 [     1.000000] cpu0: L1 32KB/64B 4-way (128 set) write-back-locking-C 
 PIPT Data cache
 [     1.000000] cpu0: L2 512KB/64B 16-way (512 set) write-through PIPT 
 Unified cache
 [     1.000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN 
 propagation, denormals
 [     1.000000] cpu1 at cpus0: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
 [     1.000000] cpu1: DC enabled IC enabled WB enabled EABT branch 
 prediction enabled
 [     1.000000] cpu1: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
 [     1.000000] cpu1: L1 32KB/64B 4-way (128 set) write-back-locking-C 
 PIPT Data cache
 [     1.000000] cpu1: L2 512KB/64B 16-way (512 set) write-through PIPT 
 Unified cache
 [     1.000000] vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN 
 propagation, denormals
 [     1.000000] cpu2 at cpus0: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
 [     1.000000] cpu2: DC enabled IC enabled WB enabled EABT branch 
 prediction enabled
 [     1.000000] cpu2: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
 [     1.000000] cpu2: L1 32KB/64B 4-way (128 set) write-back-locking-C 
 PIPT Data cache
 [     1.000000] cpu2: L2 512KB/64B 16-way (512 set) write-through PIPT 
 Unified cache
 [     1.000000] vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN 
 propagation, denormals
 [     1.000000] cpu3 at cpus0: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
 [     1.000000] cpu3: DC enabled IC enabled WB enabled EABT branch 
 prediction enabled
 [     1.000000] cpu3: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
 [     1.000000] cpu3: L1 32KB/64B 4-way (128 set) write-back-locking-C 
 PIPT Data cache
 [     1.000000] cpu3: L2 512KB/64B 16-way (512 set) write-through PIPT 
 Unified cache
 [     1.000000] vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN 
 propagation, denormals
 [     1.000000] bcmicu0 at simplebus1
 [     1.000000] fclock0 at simplebus2: 19200000 Hz fixed clock (osc)
 [     1.000000] bcmcprman0 at simplebus1: BCM283x Clock Controller
 [     1.000000] syscon0 at simplebus1autoconfiguration error: : couldn't 
 get registers
 [     1.000000] bcmaux0 at simplebus1
 [     1.000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
 [     1.000000] bcmicu1 at simplebus1: Multiprocessor
 [     1.000000] gtmr0 at simplebus0: Generic Timer
 [     1.000000] gtmr0: interrupting on local_intc irq 3
 [     1.000000] armgtmr0 at gtmr0: Generic Timer (19200 kHz, virtual)
 [     1.000000] timecounter: Timecounter "armgtmr0" frequency 19200000 
 Hz quality 500
 [     1.000004] plcom0 at simplebus1: ARM PL011 UART
 [     1.000004] plcom0: txfifo disabled
 [     1.000004] plcom0: interrupting on icu irq 57
 [     1.000004] com0 at simplebus1: BCM AUX UART, 1-byte FIFO
 [     1.000004] com0: console
 [     1.000004] com0: interrupting on icu irq 29
 [     1.000004] usbnopphy0 at simplebus0: USB PHY
 [     1.000004] /soc/thermal@7e212000 at simplebus1 not configured
 [     1.000004] bcmgpio0 at simplebus1: GPIO controller 2835
 [     1.000004] bcmgpio0: pins 0..31 interrupting on icu irq 49
 [     1.000004] bcmgpio0: pins 32..54 interrupting on icu irq 50
 [     1.000004] gpio0 at bcmgpio0: 54 pins
 [     1.000004] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 
 DMA10 DMA11
 [     1.000004] /soc/power at simplebus1 not configured
 [     1.000004] mmcpwrseq0 at simplebus0autoconfiguration error: : 
 couldn't get reset GPIOs
 [     1.000004] bsciic0 at simplebus1: Broadcom Serial Controller
 [     1.000004] bsciic0: interrupting on icu irq 53
 [     1.000004] iic0 at bsciic0: I2C bus
 [     1.000004] bcmmbox0 at simplebus1: VC mailbox
 [     1.000004] bcmmbox0: interrupting on icu irq 65
 [     1.000004] vcmbox0 at bcmmbox0
 [     1.000004] /soc/timer@7e003000 at simplebus1 not configured
 [     1.000004] /soc/txp@7e004000 at simplebus1 not configured
 [     1.000004] bcmsdhost0 at simplebus1: SD HOST controller
 [     1.000004] bcmsdhost0: interrupting on icu irq 56
 [     1.000004] bsciic1 at simplebus1: Broadcom Serial Controller
 [     1.000004] bsciic1: interrupting on icu irq 53
 [     1.000004] iic1 at bsciic1: I2C bus
 [     1.000004] /soc/pwm@7e20c000 at simplebus1 not configured
 [     1.000004] sdhc0 at simplebus1: SDHC controller
 [     1.000004] sdhc0: interrupting on icu irq 62
 [     1.000004] bsciic2 at simplebus1: Broadcom Serial Controller
 [     1.000004] bsciic2: interrupting on icu irq 53
 [     1.000004] iic2 at bsciic2: I2C bus
 [     1.000004] dwctwo0 at simplebus1: USB controller
 [     1.000004] dwctwo0: interrupting on icu irq 9
 [     1.000004] bcmpmwdog0 at simplebus1: Power management, Reset and 
 Watchdog controller
 [     1.000004] /soc/vec@7e806000 at simplebus1 not configured
 [     1.000004] /soc/hdmi@7e902000 at simplebus1 not configured
 [     1.000004] /soc/gpu at simplebus1 not configured
 [     1.000004] genfb0 at simplebus1: switching to framebuffer console
 [     1.000004] genfb0: framebuffer at 0xfe876000, size 1280x720, depth 
 32, stride 5120
 [     1.000004] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 
 emulation)
 [     1.000004] wsmux1: connecting to wsdisplay0
 [     1.000004] wsdisplay0: screen 1-3 added (default, vt100 emulation)
 [     1.000004] vchiq0 at simplebus1: BCM2835 VCHIQ
 [     1.000004] armpmu0 at simplebus0: Performance Monitor Unit
 [     1.000004] gpioleds0 at simplebus0: ACT
 [     1.000004] bcmrng0 at simplebus1: RNG
 [     1.000004] entropy: ready
 [     1.000004] timecounter: Timecounter "clockinterrupt" frequency 100 
 Hz quality 0
 [     1.374715] sdmmc0 at bcmsdhost0
 [     1.384717] sdhc0: SDHC 3.0, rev 153, caps <01610000/00000000>, 
 platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
 [     1.414720] sdmmc1 at sdhc0 slot 0
 [     1.424721] dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
 [     1.424721] usb0 at dwctwo0: USB revision 2.0
 [     1.454724] armpmu0: interrupting on local_intc irq 9
 [     1.464729] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), 
 class 9/0, rev 2.00/1.00, addr 1
 [     1.464729] uhub0: 1 port with 1 removable, self powered
 [     1.474729] IPsec: Initialized Security Association Processing.
 [     1.534737] sdmmc0: direct I/O error 5, r=6 p=0xbad77f14 write
 [     1.584746] sdmmc0: SD card status: 4-bit, C10
 [     1.594745] ld0 at sdmmc0: <0x03:0x5344:SL16G:0x80:0x62301d56:0x112>
 [     1.594745] ld0: 15193 MB, 7717 cyl, 64 head, 63 sec, 512 bytes/sect 
 x 31116288 sectors
 [     1.624752] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
 [     1.674758] sdmmc1: 4-bit width, 50.000 MHz
 [     1.684758] sdmmc1: SDIO function
 [     1.684758] bwfm0 at sdmmc1 function 1
 [     1.704762] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 
 2 not configured
 [     1.714762] (manufacturer 0x2d0, product 0xa9a6, standard function 
 interface code 0x2) at sdmmc1 function 3 not configured
 [     2.094803] uhub1 at uhub0 port 1: vendor 0424 (0x0424) product 2514 
 (0x2514), class 9/0, rev 2.00/b.b3, addr 2
 [     2.104806] uhub1: multiple transaction translators
 [     2.104806] uhub1: 4 ports with 3 removable, self powered
 [     2.934890] uhub2 at uhub1 port 1: vendor 0424 (0x0424) product 2514 
 (0x2514), class 9/0, rev 2.00/b.b3, addr 3
 [     2.944893] uhub2: multiple transaction translators
 [     2.944893] uhub2: 3 ports with 2 removable, self powered
 [     3.824985] uhidev0 at uhub1 port 2 configuration 1 interface 0
 [     3.824985] uhidev0: Logitech (0x046d) USB Keyboard (0xc31c), rev 
 1.10/64.00, addr 4, iclass 3/1
 [     3.874990] ukbd0 at uhidev0
 [     3.874990] wskbd0 at ukbd0: console keyboard, using wsdisplay0
 [     3.874990] uhidev1 at uhub1 port 2 configuration 1 interface 1
 [     3.884993] uhidev1: Logitech (0x046d) USB Keyboard (0xc31c), rev 
 1.10/64.00, addr 4, iclass 3/0
 [     3.995004] uhidev1: 3 report ids
 [     3.995004] uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
 [     4.005005] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
 [     4.005005] uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
 [     4.015006] uhub0: autoconfiguration error: illegal enable change, 
 port 1
 [     4.505059] mue0 at uhub2 port 1
 [     4.505059] mue0: vendor 0424 (0x0424) product 7800 (0x7800), rev 
 2.10/3.00, addr 5
 [     4.805091] mue0: LAN7800 id 0x7800 rev 0x2
 [     4.815093] ukphy0 at mue0 phy 1: OUI 0x00800f, model 0x0013, rev. 2
 [     4.835097] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
 1000baseT, 1000baseT-FDX, auto
 [     4.845098] mue0: Ethernet address b8:27:eb:f7:b5:fd
 [     4.845098] swwdog0: software watchdog initialized
 [     4.875101] WARNING: 3 errors while detecting hardware; check system 
 log.
 [     4.875101] boot device: ld0
 [     4.885102] root on ld0a dumps on ld0b
 [     4.895102] root file system type: ffs
 [     4.895102] kern.module.path=/stand/evbarm/10.0/modules
 [     4.905104] WARNING: no TOD clock present
 [     4.905104] WARNING: using filesystem time
 [     4.916032] WARNING: CHECK AND RESET THE DATE!
 [     4.916032] vchiq0: interrupting on icu irq 66
 [     4.925106] vchiq: vchiq_init_state: slot_zero = 0xbb1e0000, 
 is_master = 0
 [     4.925106] vchiq: local ver 8 (min 3), remote ver 8.
 [     4.925106] vcaudio0 at vchiq0: auds
 [     4.925106] bwfm0: Firmware file default:    brcmfmac43455-sdio.bin
 [     4.925106] bwfm0: Firmware file model-spec: 
 brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin
 [     4.935114] audio0 at vcaudio0: playback
 [     4.935114] audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 
 7680 bytes (40ms) for playback
 [     4.955111] spkr0 at audio0: PC Speaker (synthesized)
 [     4.955111] wsbell at spkr0 not configured
 [     4.975113] bwfm0: Found Firmware file: brcmfmac43455-sdio.bin
 [     5.015117] bwfm0: NVRAM file default:    brcmfmac43455-sdio.txt
 [     5.015117] bwfm0: NVRAM file model-spec: 
 brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
 [     5.015117] bwfm0: Found NVRAM file: 
 brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
 [     5.015117] bwfm0: CLM file default:    brcmfmac43455-sdio.clm_blob
 [     5.015117] bwfm0: CLM file model-spec: 
 brcmfmac43455-sdio.raspberrypi,3-model-b-plus.clm_blob
 [     6.825346] bwfm0: CHIPACTIVE
 [     6.925359] bwfm0: address b8:27:eb:a2:e0:a8
 [     6.925359] bwfm0: wl0: Mar  1 2015 07:29:38 version 7.45.18 
 (r538002) FWID 01-6a2c8ad4
 [    91.156615] wsdisplay0: screen 4 added (default, vt100 emulation)