xsrc/57492: unreliable keyboard regression in 10.0_BETA

[nia%pkgsrc.org@localhost]

>Number:         57492
>Category:       xsrc
>Synopsis:       unreliable keyboard regression in 10.0_BETA
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    xsrc-manager
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Jun 28 23:45:00 +0000 2023
>Originator:     nia
>Release:        
>Organization:
The NetBSD Foundation
>Environment:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.3_STABLE (GENERIC) #0: Thu Jun 22 06:06:52 UTC 2023
	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 950 MB
avail memory = 896 MB
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa 3d1faf18
FUJITSU FUTRO S720 (                      )
mainbus0 (root)
ACPI: RSDP 0x000000003B560000 000024 (v02 FTS   )
ACPI: XSDT 0x000000003B560080 000084 (v01 FTS    D3313-B1 01072009 AMI  00010013)
ACPI: FACP 0x000000003B565E70 00010C (v05 FTS    D3313-B1 01072009 AMI  00010013)
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20190405/tbfadt-693)
ACPI: DSDT 0x000000003B560198 005CD5 (v02 FTS    D3313-B1 00000000 INTL 20091112)
ACPI: FACS 0x000000003B645080 000040
ACPI: APIC 0x000000003B565F80 00007E (v03 FTS    D3313-B1 01072009 AMI  00010013)
ACPI: FPDT 0x000000003B566000 000044 (v01 FTS    D3313-B1 01072009 AMI  00010013)
ACPI: MCFG 0x000000003B566048 00003C (v01 FTS    D3313-B1 01072009 MSFT 00010013)
ACPI: HPET 0x000000003B566088 000038 (v01 FTS    D3313-B1 01072009 AMI  00000005)
ACPI: SSDT 0x000000003B5660C0 0006B2 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 0x000000003B566778 0046B7 (v02 AMD    AGESA    00000002 MSFT 04000000)
ACPI: CRAT 0x000000003B56AE30 000200 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 0x000000003B56B030 0013CA (v01 AMD    CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000003B56C400 00008C (v01 AMD    CPMDFMOT 00000001 INTL 20051117)
ACPI: SSDT 0x000000003B56C490 0010E8 (v01 AMD    CPMCMN   00000001 INTL 20051117)
ACPI: SSDT 0x000000003B56D578 000D4E (v01 AMD    CPMZPODD 00000001 INTL 20051117)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 3: pa 0xfec00000, version 0x21, 24 pins
ioapic1 at mainbus0 apid 4: pa 0xfec01000, version 0x21, 32 pins
cpu0 at mainbus0 apid 0
cpu0: AMD GX-217GA SOC with Radeon(tm) HD Graphics   , id 0x700f01
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: AMD GX-217GA SOC with Radeon(tm) HD Graphics   , id 0x700f01
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <FTS   ,D3313-B1,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
AMDN (PNP0C01) at acpi0 not configured
BROD (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [0,2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,72,74,76,78,80,82,84,86,88,90,92,94,96,98,100]
acpivga0: connected output devices:
acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0:   0x0200: TV, head 0
acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
SIO0 (PNP0C02) at acpi0 not configured
UAR0 (PNP0501) at acpi0 not configured
NBRM (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
fujhk0 at acpi0 (FEXT, FUJ02E3): Fujitsu Hotkeys
S900 (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
RMEM (PNP0C01) at acpi0 not configured
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
ACPI: Enabled 3 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1022 product 1536 (rev. 0x00)
radeon0 at pci0 dev 1 function 0: vendor 1002 product 9837 (rev. 0x00)
hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 1002 product aa01
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: HDMI01 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
pchb1 at pci0 dev 2 function 0: vendor 1022 product 1538 (rev. 0x00)
ppb0 at pci0 dev 2 function 2: vendor 1022 product 1439 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re0: interrupting at msix1 vec 0
re0: Ethernet address 90:1b:0e:67:e2:38
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
xhci0 at pci0 dev 16 function 0: vendor 1022 product 7814 (rev. 0x01)
xhci0: interrupting at msix2 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ahcisata0 at pci0 dev 17 function 0: vendor 1022 product 7801 (rev. 0x40)
ahcisata0: 64-bit DMA
ahcisata0: ignoring broken port multiplier support
ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xf730ff01<PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi3 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ohci0 at pci0 dev 18 function 0: vendor 1022 product 7807 (rev. 0x39)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb2 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 1022 product 7808 (rev. 0x39)
ehci0: interrupting at ioapic0 pin 17
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 4 ports: ohci0
usb3 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 1022 product 7807 (rev. 0x39)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb4 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 1022 product 7808 (rev. 0x39)
ehci1: interrupting at ioapic0 pin 17
ehci1: EHCI version 1.0
ehci1: 1 companion controller, 4 ports: ohci1
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1022 product 780b (rev. 0x3a)
piixpm0: SMBus initialization failed
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: vendor 10ec product 0671
hdafg1: DAC00 2ch: Speaker [Built-In]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DAC02 2ch: Speaker [Jack]
hdafg1: ADC03 2ch: Line In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
pcib0 at pci0 dev 20 function 3: vendor 1022 product 780e (rev. 0x11)
pchb2 at pci0 dev 24 function 0: vendor 1022 product 1530 (rev. 0x00)
pchb3 at pci0 dev 24 function 1: vendor 1022 product 1531 (rev. 0x00)
pchb4 at pci0 dev 24 function 2: vendor 1022 product 1532 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family16h)
pchb5 at pci0 dev 24 function 4: vendor 1022 product 1534 (rev. 0x00)
pchb6 at pci0 dev 24 function 5: vendor 1022 product 1535 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat 400 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow  3840 mW, 1650 MHz
acpicpu0: P1: FFH, lat   4 us, pow  3255 mW, 1500 MHz
acpicpu0: P2: FFH, lat   4 us, pow  2614 mW, 1350 MHz
acpicpu0: P3: FFH, lat   4 us, pow  2114 mW, 1200 MHz
acpicpu0: P4: FFH, lat   4 us, pow  1670 mW, 1000 MHz
acpicpu0: P5: FFH, lat   4 us, pow  1289 mW,  800 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1646994540 Hz quality 3000
acpivga0: connected output devices:
acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0:   0x0200: TV, head 0
acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
uhub4 at usb4: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 4 ports with 4 removable, self powered
uhub5 at usb5: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
ahcisata0 port 1: device present, speed: 6.0Gb/s
wd0 at atabus1 drive 0
wd0: <Innodisk Corp. mSATA 3SE DEMSR- 02GB>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1895 MB, 3850 cyl, 16 head, 63 sec, 512 bytes/sect x 3880960 sectors
wd0: GPT GUID: de9a02e5-4ee7-11ed-9e05-901b0e67e238
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: SanDisk (0x781) Cruzer Blade (0x5567), rev 2.10/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Blade, 1.00> disk removable
sd0: 14944 MB, 30362 cyl, 16 head, 63 sec, 512 bytes/sect x 30605312 sectors
sd0: GPT GUID: 6c88ef7d-3603-4a49-8a8a-fc22656c525d
dk0 at sd0: "EFI", 204800 blocks at 64, type: msdos
dk1 at sd0: "netbsd-root", 6144000 blocks at 204864, type: ffs
boot device: sd0
root on dk1
root file system type: ffs
kern.module.path=/stand/amd64/9.3/modules
kern info: [drm] initializing kernel modesetting (KABINI 0x1002:0x9837 0x1734:0x1202).
kern info: [drm] register mmio base: 0xfeb00000
kern info: [drm] register mmio size: 262144
kern info: [drm] doorbell mmio base: 0xD0000000
kern info: [drm] doorbell mmio size: 8388608
kern info: ATOM BIOS: AMD
radeon0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon0: info: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
kern info: [drm] Detected VRAM RAM=400M, BAR=256M
kern info: [drm] RAM width 128bits DDR
Zone  kernel: Available graphics memory: 53846 kiB
kern info: [drm] radeon: 1024M of VRAM memory ready
kern info: [drm] radeon: 2048M of GTT memory ready.
kern info: [drm] Loading kabini Microcode
WARNING: clock gained 2 days
kern info: [drm] Internal thermal controller without fan control
kern info: [drm] radeon: dpm initialized
kern info: [drm] Found VCE firmware/feedback version 40.2.2 / 15!
kern info: [drm] GART: num cpu pages 524288, num gpu pages 524288
kern info: [drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xffffa456397e5c00
radeon0: info: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x0xffffa456397e5c04
radeon0: info: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x0xffffa456397e5c08
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xffffa456397e5c0c
radeon0: info: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x0xffffa456397e5c10
radeon0: info: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0x0xffffb70031bf6c98
radeon0: info: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0x0xffffa456397e5c18
radeon0: info: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0x0xffffa456397e5c1c
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic1 pin 20 (radeon0)
kern info: [drm] radeon: irq initialized.
kern info: [drm] ring test on 0 succeeded in 3 usecs
kern info: [drm] ring test on 1 succeeded in 2 usecs
kern info: [drm] ring test on 2 succeeded in 2 usecs
kern info: [drm] ring test on 3 succeeded in 4 usecs
kern info: [drm] ring test on 4 succeeded in 3 usecs
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:345)uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:345)uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:345)uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:345)uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:345)uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:345)uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:345)uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:345)uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:345)uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:345)uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_uvd_v1_0.c:354)uvd_v1_0_start] *ERROR* UVD not responding, giving up!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_cik.c:8749)cik_startup] *ERROR* radeon: failed initializing UVD (-1).
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:342)vce_v1_0_start] *ERROR* VCE not responding, trying to reset the ECPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:342)vce_v1_0_start] *ERROR* VCE not responding, trying to reset the ECPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:342)vce_v1_0_start] *ERROR* VCE not responding, trying to reset the ECPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:342)vce_v1_0_start] *ERROR* VCE not responding, trying to reset the ECPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:342)vce_v1_0_start] *ERROR* VCE not responding, trying to reset the ECPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:342)vce_v1_0_start] *ERROR* VCE not responding, trying to reset the ECPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:342)vce_v1_0_start] *ERROR* VCE not responding, trying to reset the ECPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:342)vce_v1_0_start] *ERROR* VCE not responding, trying to reset the ECPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:342)vce_v1_0_start] *ERROR* VCE not responding, trying to reset the ECPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:342)vce_v1_0_start] *ERROR* VCE not responding, trying to reset the ECPU!!!
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/radeon/radeon_vce_v1_0.c:354)vce_v1_0_start] *ERROR* VCE not responding, giving up!!!
kern info: [drm] ib test on ring 0 succeeded in 0 usecs
kern info: [drm] ib test on ring 1 succeeded in 0 usecs
kern info: [drm] ib test on ring 2 succeeded in 0 usecs
kern info: [drm] ib test on ring 3 succeeded in 0 usecs
kern info: [drm] ib test on ring 4 succeeded in 0 usecs
kern info: [drm] Radeon Display Connectors
kern info: [drm] Connector 0:
kern info: [drm]   DP-1
kern info: [drm]   HPD1
kern info: [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
kern info: [drm]   Encoders:
kern info: [drm]     DFP1: INTERNAL_UNIPHY
kern info: [drm] Connector 1:
kern info: [drm]   DVI-I-1
kern info: [drm]   HPD2
kern info: [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
kern info: [drm]   Encoders:
kern info: [drm]     DFP2: INTERNAL_UNIPHY
kern info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
radeondrmkmsfb0 at radeon0
radeondrmkmsfb0: framebuffer at 0xffffb7003268c000, size 1600x1200, depth 32, stride 6400
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhidev0 at uhub2 port 3 configuration 1 interface 0
uhidev0: vendor 04d9 (0x4d9) USB-HID Keyboard (0x112), rev 1.10/1.12, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 3 configuration 1 interface 1
uhidev1: vendor 04d9 (0x4d9) USB-HID Keyboard (0x112), rev 1.10/1.12, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=4, output=0, feature=0
uhidev2 at uhub2 port 3 configuration 1 interface 2
uhidev2: vendor 04d9 (0x4d9) USB-HID Keyboard (0x112), rev 1.10/1.12, addr 2, iclass 3/0
uhid2 at uhidev2: input=64, output=64, feature=0

>Description:
USB keyboard will appear to have a key "stuck down", not recognize
further keypresses, and seem to lose all power (LEDs turn off).

I am tagging this problem xsrc because the problem seems far worse with
the X server running, exiting the X server seems to make it go away.

It uses the standard X "kbd" driver.

The USB mouse remains functioning as normal.
>How-To-Repeat:

>Fix:
Downgrading to netbsd-9 fixes the problem.