NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: port-alpha/33073 (isp0: unable to load dma (22))

The following reply was made to PR port-alpha/33073; it has been noted by GNATS.

From: Michael Haardt <>
To: Jason Thorpe <>
Cc:, Jason Thorpe <>,,
Subject: Re: port-alpha/33073 (isp0: unable to load dma (22))
Date: Fri, 23 Jul 2021 23:36:21 +0200

 > Hm=E2=80=A6 can you send me the output of =E2=80=9Cifconfig -m tlp0=E2=80=
 =9D ?  I have a hunch, but that bit of output would help confirm if I=E2=80=
 =99m looking under the right rock.
 That does not look changed to 9.2.  Right after booting the HEAD installker=
 and exiting sysinst:
 tlp0: flags=3D0x8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
         address: 00:00:f8:76:0e:39
         media: Ethernet autoselect instance 1 (none)
         supported Ethernet media:
                 media 10baseT
                 media 10baseT mediaopt full-duplex
                 media 10base2
                 media 10base5
                 media none instance 1
                 media 10baseT instance 1
                 media 10baseT mediaopt full-duplex instance 1
                 media 100baseTX instance 1
                 media 100baseTX mediaopt full-duplex instance 1
                 media autoselect instance 1
 Once I manually set it to 100baseTX, I can set it back to autoselect
 and it will continue working and also continues to show "status: active".

Home | Main Index | Thread Index | Old Index