NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: port-hppa/52162 (712/60 hangs during sti(4) probe)



The following reply was made to PR port-hppa/52162; it has been noted by GNATS.

From: Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: skrll%NetBSD.org@localhost, tsutsui%ceres.dti.ne.jp@localhost
Subject: Re: port-hppa/52162 (712/60 hangs during sti(4) probe)
Date: Sat, 20 Mar 2021 18:17:54 +0900

 > I'll check HEAD after 9.1 upgrade is complete.
 
 netinstall.lif from
 https://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/202103192210Z/hppa/installation/
 still doesn't work:
 
 ---
 
 ----------------------------------------------------------------------------
 BootRom Version    2.3  
 Memory Size:  128 MB
 ----------------------------------------------------------------------------
 
 
 
 
 (c) Copyright 1990-1993, Hewlett-Packard Company.
 All rights reserved
 
 Press <ESCAPE> to stop boot sequence.
 Selecting a system to boot.
 ----------------------------------------------------------------------------
 Command                             Description
 -------                             -----------
 Auto [boot|search] [on|off]         Display or set auto flag
 Boot [pri|alt|scsi.addr] [isl]      Boot from primary, alternate or SCSI
 Boot lan[.lan_addr] [install] [isl] Boot from LAN
 Chassis [on|off]                    Enable chassis codes
 Diagnostic [on|off]                 Enable/disable diagnostic boot mode
 Fastboot [on|off]                   Display or set fast boot flag
 Help                                Display the command menu
 Information                         Display system information
 LanAddress                          Display LAN station addresses
 Monitor [type]                      Select monitor type
 Path [pri|alt] [lan.id|SCSI.addr]   Change boot path
 Pim [hpmc|toc|lpmc]                 Display PIM info
 Search [ipl] [scsi|lan [install]]   Display potential boot devices
 Secure [on|off]                     Display or set security mode
 ----------------------------------------------------------------------------
 BOOT_ADMIN> boot lan
 
 Booting
 
 
 
 >> NetBSD/hppa LIF/FFS/LFS Boot, Revision 1.4 (Fri Mar 19 18:17:46 UTC 2021)
 >> Enter "reset" to reset system.
 Boot: [[[lf0a:]netbsd][-a][-c][-d][-s][-v][-q]] :- 
 10340468+3432264+344248=0xd9b3e0
 Start @ 0x200000 [1=0xf9a000-0xf9a3e0]...
 [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
 [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
 [   1.0000000]     2018, 2019, 2020, 2021 The NetBSD Foundation, Inc.  All rights reserved.
 [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [   1.0000000]     The Regents of the University of California.  All rights reserved.
 
 [   1.0000000] NetBSD 9.99.81 (RAMDISK) #0: Fri Mar 19 18:17:46 UTC 2021
 [   1.0000000] 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/hppa/compile/RAMDISK
 [   1.0000000] HP9000/712/60 (Gecko)
 [   1.0000000] real mem = 128 MB (73728 reserved for PROM, 113 MB used by NetBSD)
 [   1.0000000] avail mem = 110 MB
 [   1.0000000] mainbus0 (root) [flex fff80000]
 [   1.0000000] pdc0 at mainbus0
 [   1.0000000] power0 at mainbus0: DR25
 [   1.0000000] cpu0 at mainbus0 hpa 0xfffbe000 path 8 irq 31: PA7100LC (Hummingbird) rev 6
 [   1.0000000] cpu0: PCXL, PA-RISC 1.1c, lev 1, cat A, 60 MHz clk
 [   1.0000000] cpu0: shadows, 32K/32K D/I caches, 64 shared TLB, 8 shared BTLB
 [   1.0000000] cpu0: PCXL (CMOS-26B) floating point, rev 1
 [   1.0000000] mem0 at mainbus0 hpa 0xfffbf000 path 9: viper rev 0, ctrl 0x40400102<eisa_prf> size 128MB
 
 
 ---
 Izumi Tsutsui
 


Home | Main Index | Thread Index | Old Index