NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: port-amd64/54489 (panic: assertion "rcr4() & CR4_SMAP" failed on HP DL380 Gen10)
The following reply was made to PR port-amd64/54489; it has been noted by GNATS.
From: Takahiro Kambe <taca%back-street.net@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: port-amd64%netbsd.org@localhost
Subject: Re: port-amd64/54489 (panic: assertion "rcr4() & CR4_SMAP" failed
on HP DL380 Gen10)
Date: Fri, 05 Feb 2021 12:34:56 +0900 (JST)
In message <20210201.234157.1627783213602290279.taca%back-street.net@localhost>
on Mon, 01 Feb 2021 23:41:57 +0900 (JST),
Takahiro Kambe <taca%back-street.net@localhost> wrote:
>> Is there anyone working on this?
> I put dmesg on FreeBSD 12.2. Is it anything help?
>
> https://dmesgd.nycbug.org/index.cgi?do=view&id=5910
I added some printf() for debugging code for a few days and something
wrong with detecting CPU.
Then I recorded boot screen and found what was wrong.
No CPU is recognized.
ACPI related these messages:
bogus MADT X2APIC entry (id = 0x0)
bogus MADT X2APIC entry (id = 0x4)
bogus MADT X2APIC entry (id = 0x2)
bogus MADT X2APIC entry (id = 0x6)
And there are CPU setting for enabe/disable X2APIC.
After disabling X2APIC, install kernel of NetBSD 9.1_STABLE booted
smoothly.
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 9.1_STABLE (GENERIC) #69: Mon Feb 1 11:44:38 JST 2021
[ 1.000000] taca%tabi.i.kisu.co.jp@localhost:/data/netbsd-9/amd64/obj/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 16234 MB
[ 1.000000] avail memory = 15736 MB
[ 1.000000] cpu_rng: RDSEED
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000003] efi: systbl at pa 798fe018
[ 1.000003] HPE ProLiant MicroServer Gen10 Plus
[ 1.000003] mainbus0 (root)
[ 1.000003] ACPI: RSDP 0x000000007BFFE014 000024 (v02 HPE )
[ 1.000003] ACPI: XSDT 0x000000007BFE7188 0000FC (v01 HPE Server 00000001 INTL 20160422)
[ 1.000003] ACPI: FACP 0x000000007BFF4000 00010C (v06 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: DSDT 0x000000007BFE4000 0014F4 (v02 HPE Server 00000002 HPE 00020000)
[ 1.000003] ACPI: FACS 0x000000007BDD0000 000040
[ 1.000003] ACPI: SSDT 0x000000007BFFC000 000197 (v01 HPE CpuSsdt 00000001 INTL 20130328)
[ 1.000003] ACPI: BOOT 0x000000007BFFB000 000028 (v01 HPE Server 00000002 MSFT 01000013)
[ 1.000003] ACPI: SSDT 0x000000007BFFA000 00003A (v01 HPE PLATOPRG 00000001 INTL 20130328)
[ 1.000003] ACPI: HEST 0x000000007BFF9000 0000A8 (v01 HPE Server 00000001 INTL 00000001)
[ 1.000003] ACPI: BERT 0x000000007BFF8000 000030 (v01 HPE Server 00000001 INTL 00000001)
[ 1.000003] ACPI: ERST 0x000000007BFF7000 000250 (v01 HPE Server 00000001 INTL 00000001)
[ 1.000003] ACPI: FPDT 0x000000007BFF6000 000034 (v01 HPE Server 20170001 INTL 20160422)
[ 1.000003] ACPI: BGRT 0x000000007BFF5000 000038 (v01 HPE Server 20170001 1590 20160422)
[ 1.000003] ACPI: HPET 0x000000007BFF3000 000038 (v01 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: WDDT 0x000000007BFF2000 000040 (v01 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: APIC 0x000000007BFF1000 000084 (v03 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: MCFG 0x000000007BFF0000 00003C (v01 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: SLIT 0x000000007BFEF000 00002D (v01 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: SRAT 0x000000007BFEE000 000188 (v03 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: SPMI 0x000000007BFED000 000041 (v05 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: RASF 0x000000007BFEC000 000030 (v01 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: SPCR 0x000000007BFEB000 000050 (v02 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: MSCT 0x000000007BFEA000 00004E (v02 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: BDAT 0x000000007BFE9000 000030 (v01 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: WSMT 0x000000007BFE8000 000028 (v01 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: PCCT 0x000000007BFFD000 000030 (v01 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: DMAR 0x000000007BFE6000 0000B0 (v01 HPE Server 00000001 1590 00000001)
[ 1.000003] ACPI: SSDT 0x000000007BFE1000 002AEB (v02 HPE PCISSDT 00000002 HPE 00020000)
[ 1.000003] ACPI: SSDT 0x000000007BFE0000 0001C4 (v02 HPE TIMESSDT 00000002 HPE 00020000)
[ 1.000003] ACPI: SSDT 0x000000007BFDF000 0002F2 (v01 HPE pmab 00000001 INTL 20130328)
[ 1.000003] ACPI: OEM1 0x000000007BFDE000 0000DF (v02 HPE CPU CPC 00000002 HPE 00020000)
[ 1.000003] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 1.000003] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
[ 1.000003] x2APIC available but disabled by DMAR table
[ 1.000003] cpu0 at mainbus0 apid 0
[ 1.000003] cpu0: CPU base freq 3400000000 Hz
[ 1.000003] cpu0: CPU max freq 4600000000 Hz
[ 1.000003] cpu0: TSC freq CPUID 3408000000 Hz
[ 1.000003] cpu0: Intel(R) Xeon(R) E-2224 CPU @ 3.40GHz, id 0x906ea
[ 1.000003] cpu0: package 0, core 0, smt 0
[ 1.000003] cpu1 at mainbus0 apid 4
[ 1.000003] cpu1: Intel(R) Xeon(R) E-2224 CPU @ 3.40GHz, id 0x906ea
[ 1.000003] cpu1: package 0, core 2, smt 0
[ 1.000003] cpu2 at mainbus0 apid 2
[ 1.000003] cpu2: Intel(R) Xeon(R) E-2224 CPU @ 3.40GHz, id 0x906ea
[ 1.000003] cpu2: package 0, core 1, smt 0
[ 1.000003] cpu3 at mainbus0 apid 6
[ 1.000003] cpu3: Intel(R) Xeon(R) E-2224 CPU @ 3.40GHz, id 0x906ea
[ 1.000003] cpu3: package 0, core 3, smt 0
[ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405
[ 1.000003] acpi0: X/RSDT: OemId <HPE ,Server ,00000001>, AslId <INTL,20160422>
[ 1.000003] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
[ 1.000003] acpi0: SCI interrupting at int 9
[ 1.000003] acpi0: fixed power button present
[ 1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[ 1.001853] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.001853] timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
[ 1.024859] WERR (PNP0C33) at acpi0 not configured
[ 1.024859] acpiwmi0 at acpi0 (SRIO, PNP0C14-0): ACPI WMI Interface
[ 1.024859] acpiwmibus at acpiwmi0 not configured
[ 1.024859] SCK0 (ACPI0004) at acpi0 not configured
[ 1.024859] APIC (PNP0003) at acpi0 not configured
[ 1.024859] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
[ 1.024859] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.024859] spkr0 at pcppi1: PC Speaker
[ 1.024859] wsbell at spkr0 not configured
[ 1.024859] midi0 at pcppi1: PC speaker
[ 1.024859] sysbeep0 at pcppi1
[ 1.024859] XTRA (PNP0C02) at acpi0 not configured
[ 1.024859] ipmi_acpi0 at acpi0 (KCS, IPI0001-0): io 0xca2-0xca3
[ 1.024859] ipmi0 at ipmi_acpi0
[ 1.024859] UAR1 (PNP0501) at acpi0 not configured
[ 1.024859] TIME (ACPI000E) at acpi0 not configured
[ 1.024859] PMI0 (ACPI000D) at acpi0 not configured
[ 1.024859] ACPI: Enabled 2 GPEs in block 00 to 7F
[ 1.024859] attimer1: attached to pcppi1
[ 1.024859] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.024859] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.024859] pchb0 at pci0 dev 0 function 0: vendor 8086 product 3e33 (rev. 0x07)
[ 1.024859] ppb0 at pci0 dev 1 function 0: vendor 8086 product 1901 (rev. 0x07)
[ 1.024859] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
[ 1.024859] pci1 at ppb0 bus 7
[ 1.024859] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.024859] vendor 8086 product a379 (miscellaneous DASP, revision 0x10) at pci0 dev 18 function 0 not configured
[ 1.024859] xhci0 at pci0 dev 20 function 0: vendor 8086 product a36d (rev. 0x10)
[ 1.024859] xhci0: interrupting at msi0 vec 0
[ 1.024859] xhci0: xHCI version 1.10
[ 1.024859] usb0 at xhci0: USB revision 3.1
[ 1.024859] usb1 at xhci0: USB revision 2.0
[ 1.024859] vendor 8086 product a36f (RAM memory, revision 0x10) at pci0 dev 20 function 2 not configured
[ 1.024859] vendor 8086 product a360 (miscellaneous communications, revision 0x10) at pci0 dev 22 function 0 not configured
[ 1.024859] vendor 8086 product a364 (miscellaneous communications, revision 0x10) at pci0 dev 22 function 4 not configured
[ 1.024859] ahcisata0 at pci0 dev 23 function 0: vendor 8086 product a352 (rev. 0x10)
[ 1.024859] ahcisata0: 64-bit DMA
[ 1.024859] ahcisata0: AHCI revision 1.31, 6 ports, 32 slots, CAP 0xe534ff45<EMS,PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SALP,SSNTF,SNCQ,S64A>
[ 1.024859] ahcisata0: interrupting at msi1 vec 0
[ 1.024859] atabus0 at ahcisata0 channel 0
[ 1.024859] atabus1 at ahcisata0 channel 1
[ 1.024859] atabus2 at ahcisata0 channel 2
[ 1.024859] atabus3 at ahcisata0 channel 3
[ 1.024859] atabus4 at ahcisata0 channel 4
[ 1.024859] atabus5 at ahcisata0 channel 5
[ 1.024859] ppb1 at pci0 dev 27 function 0: vendor 8086 product a32c (rev. 0xf0)
[ 1.024859] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
[ 1.024859] pci2 at ppb1 bus 6
[ 1.024859] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.024859] ppb2 at pci0 dev 28 function 0: vendor 8086 product a338 (rev. 0xf0)
[ 1.024859] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s
[ 1.024859] ppb2: link is x2 @ 5.0GT/s
[ 1.024859] pci3 at ppb2 bus 2
[ 1.024859] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.024859] wm0 at pci3 dev 0 function 0: I350 Gigabit Network Connection (rev. 0x01)
[ 1.024859] wm0: for TX and RX interrupting at msix2 vec 0 affinity to 0
[ 1.024859] wm0: for TX and RX interrupting at msix2 vec 1 affinity to 1
[ 1.024859] wm0: for TX and RX interrupting at msix2 vec 2 affinity to 2
[ 1.024859] wm0: for TX and RX interrupting at msix2 vec 3 affinity to 3
[ 1.024859] wm0: for LINK interrupting at msix2 vec 4
[ 1.024859] wm0: PCI-Express bus
[ 1.024859] wm0: 16384 words (16 address bits) SPI EEPROM, version 1.63, option ROM Version 1.2529.0, Image Unique ID e100108f
[ 1.024859] wm0: Ethernet address 94:40:c9:ed:71:c2
[ 1.024859] wm0: Copper
[ 1.024859] wm0: 0x40674440<SPI,IOH_VALID,PCIE,NEWQUEUE,ASF_FIRM,ARC_SUBSYS,WOL,EEE,CRC_STRIP>
[ 1.024859] ihphy0 at wm0 phy 1: I350 10/100/1000 media interface, rev. 1
[ 1.024859] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.024859] wm1 at pci3 dev 0 function 1: I350 Gigabit Network Connection (rev. 0x01)
[ 1.024859] wm1: for TX and RX interrupting at msix3 vec 0 affinity to 0
[ 1.024859] wm1: for TX and RX interrupting at msix3 vec 1 affinity to 1
[ 1.024859] wm1: for TX and RX interrupting at msix3 vec 2 affinity to 2
[ 1.024859] wm1: for TX and RX interrupting at msix3 vec 3 affinity to 3
[ 1.024859] wm1: for LINK interrupting at msix3 vec 4
[ 1.024859] wm1: PCI-Express bus
[ 1.024859] wm1: 16384 words (16 address bits) SPI EEPROM, version 1.63, option ROM Version 1.2529.0, Image Unique ID e100108f
[ 1.024859] wm1: Ethernet address 94:40:c9:ed:71:c3
[ 1.024859] wm1: Copper
[ 1.024859] wm1: 0x40674440<SPI,IOH_VALID,PCIE,NEWQUEUE,ASF_FIRM,ARC_SUBSYS,WOL,EEE,CRC_STRIP>
[ 1.024859] ihphy1 at wm1 phy 1: I350 10/100/1000 media interface, rev. 1
[ 1.024859] ihphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.024859] wm2 at pci3 dev 0 function 2: I350 Gigabit Network Connection (rev. 0x01)
[ 1.024859] wm2: for TX and RX interrupting at msix4 vec 0 affinity to 0
[ 1.024859] wm2: for TX and RX interrupting at msix4 vec 1 affinity to 1
[ 1.024859] wm2: for TX and RX interrupting at msix4 vec 2 affinity to 2
[ 1.024859] wm2: for TX and RX interrupting at msix4 vec 3 affinity to 3
[ 1.024859] wm2: for LINK interrupting at msix4 vec 4
[ 1.024859] wm2: PCI-Express bus
[ 1.024859] wm2: 16384 words (16 address bits) SPI EEPROM, version 1.63, option ROM Version 1.2529.0, Image Unique ID e100108f
[ 1.024859] wm2: Ethernet address 94:40:c9:ed:71:c4
[ 1.024859] wm2: Copper
[ 1.024859] wm2: 0x40674440<SPI,IOH_VALID,PCIE,NEWQUEUE,ASF_FIRM,ARC_SUBSYS,WOL,EEE,CRC_STRIP>
[ 1.024859] ihphy2 at wm2 phy 1: I350 10/100/1000 media interface, rev. 1
[ 1.024859] ihphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.024859] wm3 at pci3 dev 0 function 3: I350 Gigabit Network Connection (rev. 0x01)
[ 1.024859] wm3: for TX and RX interrupting at msix5 vec 0 affinity to 0
[ 1.024859] allocated pic msix5 type edge pin 1 level 6 to cpu1 slot 3 idt entry 115
[ 1.024859] wm3: for TX and RX interrupting at msix5 vec 1 affinity to 1
[ 1.024859] allocated pic msix5 type edge pin 2 level 6 to cpu1 slot 4 idt entry 116
[ 1.024859] wm3: for TX and RX interrupting at msix5 vec 2 affinity to 2
[ 1.024859] allocated pic msix5 type edge pin 3 level 6 to cpu1 slot 4 idt entry 117
[ 1.024859] wm3: for TX and RX interrupting at msix5 vec 3 affinity to 3
[ 1.024859] allocated pic msix5 type edge pin 4 level 6 to cpu1 slot 4 idt entry 118
[ 1.024859] wm3: for LINK interrupting at msix5 vec 4
[ 1.024859] wm3: PCI-Express bus
[ 1.024859] wm3: 16384 words (16 address bits) SPI EEPROM, version 1.63, option ROM Version 1.2529.0, Image Unique ID e100108f
[ 1.024859] wm3: Ethernet address 94:40:c9:ed:71:c5
[ 1.024859] wm3: Copper
[ 1.024859] wm3: 0x40674440<SPI,IOH_VALID,PCIE,NEWQUEUE,ASF_FIRM,ARC_SUBSYS,WOL,EEE,CRC_STRIP>
[ 1.024859] ihphy3 at wm3 phy 1: I350 10/100/1000 media interface, rev. 1
[ 1.024859] ihphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.024859] ppb3 at pci0 dev 29 function 0: vendor 8086 product a330 (rev. 0xf0)
[ 1.024859] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
[ 1.024859] ppb3: link is x1 @ 5.0GT/s
[ 1.024859] pci4 at ppb3 bus 1
[ 1.024859] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.024859] vendor 103c product 3306 (miscellaneous system, revision 0x07) at pci4 dev 0 function 0 not configured
[ 1.024859] genfb0 at pci4 dev 0 function 1: vendor 102b product 0538 (rev. 0x02)
[ 1.024859] genfb0: framebuffer at 0x84000000, size 1024x768, depth 32, stride 4096
[ 1.024859] genfb0: shadow framebuffer enabled, size 3072 KB
[ 1.024859] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[ 1.024859] wsmux1: connecting to wsdisplay0
[ 1.024859] drm at genfb0 not configured
[ 1.024859] vendor 103c product 3307 (miscellaneous system, revision 0x07) at pci4 dev 0 function 2 not configured
[ 1.024859] ehci0 at pci4 dev 0 function 4: vendor 103c product 22f6 (rev. 0x00)
[ 1.024859] allocated pic msi6 type edge pin 0 level 6 to cpu1 slot 5 idt entry 119
[ 1.024859] ehci0: interrupting at msi6 vec 0
[ 1.024859] ehci0: EHCI version 1.0
[ 1.024859] usb2 at ehci0: USB revision 2.0
[ 1.024859] ppb4 at pci0 dev 29 function 1: vendor 8086 product a331 (rev. 0xf0)
[ 1.024859] ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
[ 1.024859] pci5 at ppb4 bus 3
[ 1.024859] pci5: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.024859] ppb5 at pci0 dev 29 function 2: vendor 8086 product a332 (rev. 0xf0)
[ 1.024859] ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
[ 1.024859] pci6 at ppb5 bus 4
[ 1.024859] pci6: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.024859] ppb6 at pci0 dev 29 function 3: vendor 8086 product a333 (rev. 0xf0)
[ 1.024859] ppb6: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
[ 1.024859] pci7 at ppb6 bus 5
[ 1.024859] pci7: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.024859] pcib0 at pci0 dev 31 function 0: vendor 8086 product a30a (rev. 0x10)
[ 1.024859] vendor 8086 product a324 (miscellaneous serial bus, revision 0x10) at pci0 dev 31 function 5 not configured
[ 1.024859] isa0 at pcib0
[ 1.024859] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
[ 1.024859] pckbc0 at isa0 port 0x60-0x64
[ 1.024859] acpicpu0 at cpu0: ACPI CPU
[ 1.024859] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.024859] acpicpu0: C2: FFH, lat 41 us, pow 350 mW
[ 1.024859] acpicpu0: T0: FFH, lat 1 us, pow 13586 mW, 100 %
[ 1.024859] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[ 1.024859] acpicpu1 at cpu1: ACPI CPU
[ 1.024859] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
[ 1.024859] acpicpu2 at cpu2: ACPI CPU
[ 1.024859] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
[ 1.024859] acpicpu3 at cpu3: ACPI CPU
[ 1.024859] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
[ 1.024859] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.024859] cpu1: CPU base freq 3400000000 Hz
[ 1.024859] cpu1: CPU max freq 4600000000 Hz
[ 1.024859] cpu1: TSC freq CPUID 3408000000 Hz
[ 1.024859] cpu2: CPU base freq 3400000000 Hz
[ 1.024859] cpu2: CPU max freq 4600000000 Hz
[ 1.024859] cpu2: TSC freq CPUID 3408000000 Hz
[ 1.024859] cpu3: CPU base freq 3400000000 Hz
[ 1.024859] cpu3: CPU max freq 4600000000 Hz
[ 1.024859] cpu3: TSC freq CPUID 3408000000 Hz
[ 1.024859] timecounter: Timecounter "TSC" frequency 3408000000 Hz quality 3000
[ 1.739850] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.739850] uhub0: 6 ports with 6 removable, self powered
[ 1.739850] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.739850] uhub1: 16 ports with 16 removable, self powered
[ 1.739850] IPsec: Initialized Security Association Processing.
[ 1.755906] uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.755906] uhub2: 8 ports with 8 removable, self powered
[ 1.845907] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 2.855908] ahcisata0 port 5: PHY offline
[ 2.855908] ahcisata0 port 2: PHY offline
[ 2.855908] ahcisata0 port 1: PHY offline
[ 2.855908] ahcisata0 port 4: PHY offline
[ 2.855908] ahcisata0 port 3: PHY offline
[ 3.355908] uhidev0 at uhub1 port 1 configuration 1 interface 0
[ 3.355908] uhidev0: vendor 0566 (0x566) product 3107 (0x3107), rev 1.10/1.00, addr 1, iclass 3/1
[ 3.375912] ukbd0 at uhidev0
[ 3.385908] wd0 at atabus0 drive 0
[ 3.385908] wd0: <Crucial_CT525MX300SSD1>
[ 3.385908] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[ 3.385908] wd0: 489 GB, 1017471 cyl, 16 head, 63 sec, 512 bytes/sect x 1025610768 sectors
[ 3.385908] wd0: GPT GUID: a4e46b8b-64fe-11eb-8953-9440c9ed71c2
[ 3.385908] dk0 at wd0: "a4e549f1-64fe-11eb-8953-9440c9ed71c2", 409600 blocks at 40, type: msdos
[ 3.385908] dk1 at wd0: "a4e5b302-64fe-11eb-8953-9440c9ed71c2", 1016709120 blocks at 409640, type: ffs
[ 3.385908] dk2 at wd0: "a4e6857a-64fe-11eb-8953-9440c9ed71c2", 8388608 blocks at 1017118760, type: swap
[ 3.385908] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
[ 3.385908] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
[ 3.775908] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[ 3.775908] uhidev1 at uhub1 port 1 configuration 1 interface 1
[ 3.775908] uhidev1: vendor 0566 (0x566) product 3107 (0x3107), rev 1.10/1.00, addr 1, iclass 3/0
[ 3.775908] uhidev1: 2 report ids
[ 3.775908] uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
[ 3.775908] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
[ 4.685908] umass0 at uhub1 port 2 configuration 1 interface 0
[ 4.685908] umass0: UFD 2.0 (0x90c) Silicon-Power8G (0x1000), rev 2.00/11.00, addr 2
[ 4.685908] umass0: using SCSI over Bulk-Only
[ 4.685908] scsibus0 at umass0: 2 targets, 1 lun per target
[ 5.115908] sd0 at scsibus0 target 0 lun 0: <UFD 2.0, Silicon-Power8G, 1100> disk removable
[ 5.115908] sd0: 7681 MB, 15744 cyl, 16 head, 63 sec, 512 bytes/sect x 15730688 sectors
[ 5.125908] sd0: GPT GUID: 0832269f-7ea8-4195-bf0e-2b195f6d4ea2
[ 5.125908] dk3 at sd0: "EFI system", 262144 blocks at 2048, type: msdos
[ 5.125908] dk4 at sd0: "b74b3fb7-d83c-4b23-9666-8cc83142cdae", 2908160 blocks at 264192, type: ffs
[ 5.595908] uhub3 at uhub1 port 8: vendor 0424 (0x424) product 2660 (0x2660), class 9/0, rev 2.00/8.01, addr 3
[ 5.595908] uhub3: single transaction translator
[ 5.595908] uhub3: 2 ports with 1 removable, self powered
[ 11.335908] ipmi0: version 32.0 interface KCS iobase 0xca2/0x2 spacing 1
[ 11.335908] ipmi0: ID 19.3 IPMI 2.0 Available
[ 11.335908] ipmi0: Additional Chassis IPMBRcv FRU SEL SDR Sensor
[ 11.335908] ipmi0: Manufacturer 0b85c Product 205c
[ 11.335908] ipmi0: Firmware 2.11
[ 67.675908] uhub2: autoconfiguration error: device problem, disabling port 4
[ 67.735907] WARNING: 1 error while detecting hardware; check system log.
[ 67.735907] boot device: sd0
[ 67.735907] root on dk4 dumps on dk2
[ 67.735907] root file system type: ffs
[ 67.745907] kern.module.path=/stand/amd64/9.1/modules
[ 67.745907] WARNING: clock gained 4 days
--
Takahiro Kambe <taca%back-street.net@localhost>
Home |
Main Index |
Thread Index |
Old Index