Re: bin/55472: 9.99.65 -> 9.99.69 dhcpcd fails acquiring leases

[Frank Kardel <kardel%netbsd.org@localhost>]

rc.conf:

dhcpcd=YES
dhcpcd_flags="xennet0"

iifconfig when 9.99.69 dhcpcd fails:

xennet0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
capabilities=0x3fc00<TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx>
capabilities=0x3fc00<TCP6CSUM_Rx,TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx>
        enabled=0
        ec_capabilities=0x5<VLAN_MTU,JUMBO_MTU>
        ec_enabled=0
        address: aa:00:00:d1:01:00
        inet6 fe80::a800:ff:fed1:100%xennet0/64 flags 0 scopeid 0x1

Console:

dhcpcd-9.1.4 starting
DUID 00:01:00:01:26:78:8c:61:aa:00:00:d1:01:00
timed out
dhcpcd exited
/etc/rc.d/dhcpcd exited with code 1

9.99.65 gives following console output

Starting dhcpcd.
dhcpcd-9.1.1 starting
DUID 00:01:00:01:26:78:8c:61:aa:00:00:d1:01:00
xennet0: carrier acquired
xennet0: IAID 00:d1:01:00
xennet0: soliciting an IPv6 router
xennet0: rebinding lease of 10.128.2.6
xennet0: leased 10.128.2.6 for 600 seconds
xennet0: adding route to 10.128.2.0/24
xennet0: adding default route via 10.128.2.1
forked to background, child pid 1614

fconfig after 9.99.65 obtained an address:

xennet0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
capabilities=0x3fc00<TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx>
capabilities=0x3fc00<TCP6CSUM_Rx,TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx>
        enabled=0
        ec_capabilities=0x5<VLAN_MTU,JUMBO_MTU>
        ec_enabled=0
        address: aa:00:00:d1:01:00
        inet 10.128.2.6/24 broadcast 10.128.2.255 flags 0
        inet6 fe80::a800:ff:fed1:100%xennet0/64 flags 0 scopeid 0x1

Frank


On 07/15/20 15:55, Roy Marples wrote:
> The following reply was made to PR bin/55472; it has been noted by GNATS.
>
> From: Roy Marples <roy%marples.name@localhost>
> To: gnats-bugs%NetBSD.org@localhost, Frank Kardel <kardel%netbsd.org@localhost>
> Cc:
> Subject: Re: bin/55472: 9.99.65 -> 9.99.69 dhcpcd fails acquiring leases
> Date: Wed, 15 Jul 2020 14:51:13 +0100
>
>   Hi Frank.
>   
>   Could you provide ifconfig output on the failing host please?
>   
>   Going to assume you just did dhcpcd=YES in rc.conf?
>   
>   Roy
>