NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: install/55202 (sysinst doesn't release temporary swap in some error cases?)

The following reply was made to PR install/55202; it has been noted by GNATS.

From: Izumi Tsutsui <>
Subject: Re: install/55202 (sysinst doesn't release temporary swap in some error
Date: Fri, 15 May 2020 03:34:40 +0900

 > should be fixed, but might be hard to verify - feel free to just close
 > if you can't check it easily.
 Fix confirmed:
  On which disk do you want to upgrade NetBSD?
                               Available disks                                 
                               a: current system                               
                              >b: sd0 (2.2G)                                   
                               x: Exit                                         
  No root partition defined.  Cannot continue 
                            >Hit enter to continue 
 [1] + Suspended               sysinst
 # swapctl -l
 Device      1K-blocks     Used    Avail Capacity  Priority
 /dev/sd0b      131200        0   131200     0%    0
 # fg
  NetBSD/hp300 9.0
  This menu-driven tool is designed to help you install NetBSD to a hard disk,
  or upgrade an existing NetBSD system, with a minimum of work.
  In the following menus type the reference letter (a, b, c, ...) to select an
  item, or type CTRL+N/CTRL+P to select the next/previous item.
  The arrow keys and Page-up/Page-down may also work.
  Activate the current selection from the menu by typing the enter key.
  If your machine has 4MB or less, sysinst will not operate correctly.
  Thank you for using NetBSD!
                 NetBSD-9.0 Install System                     
                 a: Install NetBSD to hard disk                
                >b: Upgrade NetBSD on a hard disk              
                 c: Re-install sets or install additional sets 
                 d: Reboot the computer                        
                 e: Utility menu                               
                 f: Config menu                                
                 x: Exit Install System                        
 [1] + Suspended               sysinst
 # swapctl -l
 no swap devices configured
 Izumi Tsutsui

Home | Main Index | Thread Index | Old Index