kern/54855: New "ahcisata0 port 1: device present" messages with NetBSD 9

[Simon Burge <simonb%NetBSD.org@localhost>]

>Number:         54855
>Category:       kern
>Synopsis:       New "ahcisata0 port 1: device present" messages with NetBSD 9
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Jan 12 12:30:00 +0000 2020
>Originator:     Simon Burge
>Release:        NetBSD 9.0_RC1
>Organization:
Not very organised
>Environment:
System: NetBSD thoreau.thistledown.com.au 9.0_RC1 NetBSD 9.0_RC1 (THOREAU) #0: Fri Jan 10 08:24:25 AEDT 2020 simonb%thoreau.thistledown.com.au@localhost:/NetBSD/src9/sys/arch/amd64/compile/THOREAU amd64
Architecture: x86_64
Machine: amd64
>Description:
	A NetBSD 9.0_RC1 kernel is print a number

		ahcisata0 port 1: device present, speed: 3.0Gb/s

	messages for two SSD disks attached to a HP N40L.  I've also
	seen a handful of "soft error (corrected)" messages too.  These
	seem to be an indication of a device reset?

	A regular SATA disk on the same system hasn't reported any of
	these.  The two SSDs are in a RAIDframe mirror.

	This machine has been running NetBSD 6 and then NetBSD 8.1 for
	a number of years without any sata errors of any kind.

	A full dmesg at the end of this PR, including these messages.

>How-To-Repeat:
	Boot netbsd-9 branch on HP N40L with SSD disks??
>Fix:
	None given

Full dmesg including ahcisata errors at the bottom:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.0 (THOREAU) #0: Fri Jan 10 08:24:25 AEDT 2020
	simonb%thoreau.thistledown.com.au@localhost:/NetBSD/src9/sys/arch/amd64/compile/THOREAU
total memory = 8191 MB
avail memory = 7919 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP ProLiant MicroServer (   )
mainbus0 (root)
ACPI: RSDP 0x00000000000F8F50 000024 (v02 HP    )
ACPI: XSDT 0x00000000C7FA0100 00007C (v01 HP     ProLiant 20110729 HP   00000097)
ACPI: FACP 0x00000000C7FA0290 0000F4 (v03 HP     ProLiant 20110729 HP   00000097)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20190405/tbfadt-642)
ACPI: DSDT 0x00000000C7FA0620 006947 (v01 HP     ProLiant 00000006 INTL 20051117)
ACPI: FACS 0x00000000C7FAE000 000040
ACPI: APIC 0x00000000C7FA0390 000072 (v01 HP     ProLiant 20110729 HP   00000097)
ACPI: MCFG 0x00000000C7FA0410 00003C (v01 HP     ProLiant 20110729 HP   00000097)
ACPI: SPMI 0x00000000C7FA0450 000041 (v05 HP     ProLiant 20110729 HP   00000097)
ACPI: OEMB 0x00000000C7FAE040 000072 (v01 HP     ProLiant 20110729 HP   00000097)
ACPI: HPET 0x00000000C7FAB4E0 000038 (v01 HP     ProLiant 20110729 HP   00000097)
ACPI: EINJ 0x00000000C7FAB520 000130 (v01 AMIER  AMI_EINJ 20110729 HP   00000097)
ACPI: BERT 0x00000000C7FAB6B0 000030 (v01 AMIER  AMI_BERT 20110729 HP   00000097)
ACPI: ERST 0x00000000C7FAB6E0 0001B0 (v01 AMIER  AMI_ERST 20110729 HP   00000097)
ACPI: HEST 0x00000000C7FAB890 0000A8 (v01 AMIER  ABC_HEST 20110729 HP   00000097)
ACPI: SSDT 0x00000000C7FAB940 000458 (v01 HP     ProLiant 00000001 AMD  00000001)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x21, 24 pins
cpu0 at mainbus0 apid 0
cpu0: AMD Turion(tm) II Neo N40L Dual-Core Processor, id 0x100f63
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: AMD Turion(tm) II Neo N40L Dual-Core Processor, id 0x100f63
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <HP    ,ProLiant,20110729>, AslId <HP  ,00000097>
ACPI: Dynamic OEM Table Load:
ACPI: OEMN 0xFFFF863A6E57D810 000624 (v01 AMD    NAHP     00000001 INTL 20051117)
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
BROD (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
OMSC (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI: Enabled 4 GPEs in block 00 to 1F
attimer1: attached to pcppi1
autoconfiguration error: ipmi0: ipmi_map_regs:bus_space_map(..., 0, 2, 0, 0xffffffff822e9778) type m failed 35
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1022 product 9601 (rev. 0x00)
ppb0 at pci0 dev 2 function 0: vendor 1022 product 9603 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
ppb0: link is x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
nouveau0 at pci1 dev 0 function 0: vendor 10de product 0a65 (rev. 0xa2)
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: vendor 10de product 000b
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
hdafg1 at hdaudio0: vendor 10de product 000b
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
hdafg2 at hdaudio0: vendor 10de product 000b
hdafg2: DP00 8ch: Digital Out [Jack]
hdafg2: 8ch/0ch 48000Hz PCM16*
hdafg3 at hdaudio0: vendor 10de product 000b
hdafg3: DP00 8ch: Digital Out [Jack]
hdafg3: 8ch/0ch 48000Hz PCM16*
ppb1 at pci0 dev 4 function 0: vendor 1022 product 9604 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 104c product 8231 (rev. 0x03)
ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
puc0 at pci3 dev 0 function 0: Oxford Semiconductor OXmPCI952 UARTs (com, com)
com2 at puc0 port 0 (16950-compatible): ioaddr 0xe800, interrupting at ioapic0 pin 16
com2: ns16550a, working fifo
com3 at puc0 port 1 (16950-compatible): ioaddr 0xe808, interrupting at ioapic0 pin 16
com3: ns16550a, working fifo
vendor 1415 product 9510 (parallel communications, bi-directional) at pci3 dev 0 function 1 not configured
ppb3 at pci0 dev 6 function 0: vendor 1022 product 9606 (rev. 0x00)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci4 dev 0 function 0: Broadcom BCM5723 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 18
bge0: HW config 00000155, 00004015, 00002830, 00000000 00000000
bge0: ASIC BCM5784 B0 (0x5784100), Ethernet address a0:b3:cc:e0:0d:7f
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: vendor 1002 product 4391 (rev. 0x40)
ahcisata0: 64-bit DMA
ahcisata0: ignoring broken port multiplier support
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xf720ff03<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at ioapic0 pin 19
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ohci0 at pci0 dev 18 function 0: vendor 1002 product 4397 (rev. 0x00)
csr: 02a00117
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
ohci0: autoconfiguration error: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 5 ports: ohci0
usb1 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 1002 product 4397 (rev. 0x00)
csr: 02a00117
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
ohci1: autoconfiguration error: SMM does not respond, resetting
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: 1 companion controller, 5 ports: ohci1
usb3 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1002 product 4385 (rev. 0x42)
piixpm0: polling
iic0 at piixpm0 port 0: I2C bus
spdmem0 at iic0 addr 0x50: 9965525-146.A00LF
spdmem0: DDR3 SDRAM, ECC, temp-sensor, 8GB, 1333MHz (PC3-10666)
spdmem0: 13 rows, 13 cols, 8 log. banks, 2 phys. banks, 1.500ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 8-8-8-24
spdmem0: 1.5V operable
spdmem1 at iic0 addr 0x51: 9965525-146.A00LF
spdmem1: DDR3 SDRAM, ECC, temp-sensor, 8GB, 1333MHz (PC3-10666)
spdmem1: 13 rows, 13 cols, 8 log. banks, 2 phys. banks, 1.500ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 8-8-8-24
spdmem1: 1.5V operable
sdtemp0 at iic0 addr 0x18: Atmel AT30TS00 Temp Sensor
sdtemp0: high accuracy, wider range, 0.25C resolution, event with shutdown
sdtemp0: Hardware limits: none set
iic1 at piixpm0 port 1: I2C bus
w83795g0 at iic1 addr 0x2f: Nuvaton W83795ADG (rev B) Hardware Monitor
gpio0 at w83795g0: 4 pins
iic2 at piixpm0 port 2: I2C bus
iic3 at piixpm0 port 3: I2C bus
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x40)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus4 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus5 at ixpide0 channel 1
pcib0 at pci0 dev 20 function 3: vendor 1002 product 439d (rev. 0x40)
ppb4 at pci0 dev 20 function 4: vendor 1002 product 4384 (rev. 0x40)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
ohci2 at pci0 dev 22 function 0: vendor 1002 product 4397 (rev. 0x00)
csr: 02a00117
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb4 at ohci2: USB revision 1.0
ehci2 at pci0 dev 22 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci2: interrupting at ioapic0 pin 17
ehci2: dropped intr workaround enabled
ehci2: EHCI version 1.0
ehci2: 1 companion controller, 4 ports: ohci2
usb5 at ehci2: USB revision 2.0
pchb1 at pci0 dev 24 function 0: vendor 1022 product 1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 1022 product 1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 1022 product 1202 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h)
pchb4 at pci0 dev 24 function 4: vendor 1022 product 1204 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
autoconfiguration error: pckbc: cmd word write error
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow  5330 mW, 1500 MHz
acpicpu0: P1: FFH, lat   4 us, pow  4443 mW, 1300 MHz
acpicpu0: P2: FFH, lat   4 us, pow  3187 mW, 1000 MHz
acpicpu0: P3: FFH, lat   4 us, pow  2218 mW,  800 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1497653380 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
uhub1 at usb1: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
uhub2 at usb2: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uhub4 at usb4: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 4 ports with 4 removable, self powered
uhub5 at usb5: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
ehci0: handing over low speed device on port 2 to ohci0
ehci1: handing over full speed device on port 1 to ohci1
wd0 at atabus0 drive 0
wd0: <Samsung SSD 860 EVO 1TB>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd1 at atabus1 drive 0
wd1: <Samsung SSD 860 EVO 1TB>
wd1: drive supports 1-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd2 at atabus3 drive 0
wd2: <WDC WD80EFAX-68LHPN0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 7452 GB, 15504021 cyl, 16 head, 63 sec, 512 bytes/sect x 15628053168 sectors
wd2: GPT GUID: 72cfbf5c-faa5-4a56-993c-ea46cb53c122
dk0 at wd2: "archive-8tb-primary", 15628053007 blocks at 128, type: ffs
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd2(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
atapibus0 at atabus4: 2 targets
cd0 at atapibus0 drive 1: <PIONEER DVD-RW  DVR-220L, LHQC279600WL, 1.01> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ixpide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
WARNING: findroot: double match for boot device (bootinfo/bootwedge:wd0 bootinfo/bootwedge:wd1)
Component on: wd0a: 67117056
   Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
   Version: 2 Serial Number: 1000 Mod Counter: 679
   Clean: Yes Status: 0
   sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
   RAID Level: 1  blocksize: 512 numBlocks: 67116928
   Autoconfig: Yes
   Root partition: Soft
   Last configured as: raid0
Component on: wd0e: 67117056
   Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
   Version: 2 Serial Number: 1001 Mod Counter: 725
   Clean: Yes Status: 0
   sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
   RAID Level: 1  blocksize: 512 numBlocks: 67116928
   Autoconfig: Yes
   Root partition: No
   Last configured as: raid1
Component on: wd0f: 67117056
   Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
   Version: 2 Serial Number: 1003 Mod Counter: 388
   Clean: Yes Status: 0
   sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
   RAID Level: 1  blocksize: 512 numBlocks: 67116928
   Autoconfig: Yes
   Root partition: No
   Last configured as: raid3
Component on: wd0g: 1752158208
   Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
   Version: 2 Serial Number: 1002 Mod Counter: 711
   Clean: Yes Status: 0
   sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
   RAID Level: 1  blocksize: 512 numBlocks: 1752158080
   Autoconfig: Yes
   Root partition: No
   Last configured as: raid2
Component on: wd1a: 67117056
   Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
   Version: 2 Serial Number: 1000 Mod Counter: 679
   Clean: Yes Status: 0
   sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
   RAID Level: 1  blocksize: 512 numBlocks: 67116928
   Autoconfig: Yes
   Root partition: Soft
   Last configured as: raid0
Component on: wd1e: 67117056
   Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
   Version: 2 Serial Number: 1001 Mod Counter: 725
   Clean: Yes Status: 0
   sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
   RAID Level: 1  blocksize: 512 numBlocks: 67116928
   Autoconfig: Yes
   Root partition: No
   Last configured as: raid1
Component on: wd1f: 67117056
   Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
   Version: 2 Serial Number: 1003 Mod Counter: 388
   Clean: Yes Status: 0
   sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
   RAID Level: 1  blocksize: 512 numBlocks: 67116928
   Autoconfig: Yes
   Root partition: No
   Last configured as: raid3
Component on: wd1g: 1752158208
   Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
   Version: 2 Serial Number: 1002 Mod Counter: 711
   Clean: Yes Status: 0
   sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
   RAID Level: 1  blocksize: 512 numBlocks: 1752158080
   Autoconfig: Yes
   Root partition: No
   Last configured as: raid2
Found: wd0a at 0
Found: wd1a at 1
RAID autoconfigure
Configuring raid0:
Starting autoconfiguration of RAID set...
Looking for 0 in autoconfig
Found: wd0a at 0
Looking for 1 in autoconfig
Found: wd1a at 1
raid0: allocating 20 buffers of 65536 bytes.
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 67116928 (32771 MB)
Found: wd0e at 0
Found: wd1e at 1
RAID autoconfigure
Configuring raid1:
Starting autoconfiguration of RAID set...
Looking for 0 in autoconfig
Found: wd0e at 0
Looking for 1 in autoconfig
Found: wd1e at 1
raid1: allocating 20 buffers of 65536 bytes.
raid1: RAID Level 1
raid1: Components: /dev/wd0e /dev/wd1e
raid1: Total Sectors: 67116928 (32771 MB)
Found: wd0f at 0
Found: wd1f at 1
RAID autoconfigure
Configuring raid3:
Starting autoconfiguration of RAID set...
Looking for 0 in autoconfig
Found: wd0f at 0
Looking for 1 in autoconfig
Found: wd1f at 1
raid3: allocating 20 buffers of 65536 bytes.
raid3: RAID Level 1
raid3: Components: /dev/wd0f /dev/wd1f
raid3: Total Sectors: 67116928 (32771 MB)
Found: wd0g at 0
Found: wd1g at 1
RAID autoconfigure
Configuring raid2:
Starting autoconfiguration of RAID set...
Looking for 0 in autoconfig
Found: wd0g at 0
Looking for 1 in autoconfig
Found: wd1g at 1
raid2: allocating 20 buffers of 65536 bytes.
raid2: RAID Level 1
raid2: Components: /dev/wd0g /dev/wd1g
raid2: Total Sectors: 1752158080 (855545 MB)
WARNING: 4 errors while detecting hardware; check system log.
boot device: raid0
root on raid0a dumps on raid0b
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules
nouveau0: info: NVIDIA GT218 (0a8280b1)
nouveau0: info: bios: version 70.18.70.00.06
nouveau0: info: fb: 1024 MiB DDR3
Zone  kernel: Available graphics memory: 2611266 kiB
Zone   dma32: Available graphics memory: 2097152 kiB
nouveau0: info: DRM: VRAM: 1024 MiB
nouveau0: info: DRM: GART: 1048576 MiB
nouveau0: info: DRM: TMDS table version 2.0
nouveau0: info: DRM: DCB version 4.0
nouveau0: info: DRM: DCB outp 00: 01000302 00020030
nouveau0: info: DRM: DCB outp 01: 02000300 00000000
nouveau0: info: DRM: DCB outp 02: 02011362 00020010
nouveau0: info: DRM: DCB outp 03: 01022310 00000000
nouveau0: info: DRM: DCB conn 00: 00001030
nouveau0: info: DRM: DCB conn 01: 00002161
nouveau0: info: DRM: DCB conn 02: 00000200
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
nouveau0: info: DRM: MM: using COPY for buffer copies
nouveaufb0 at nouveau0
nouveaufb0: framebuffer at 0xffffdb00b0b82000, size 1920x1200, depth 32, stride 7680
nouveau0: autoconfiguration error: error: disp: ERROR 5 [INVALID_STATE] 0b [] chid 1 mthd 0080 data 00000000
nouveau0: info: disp: Base 1:
nouveau0: info: disp: 	0084: 00000000              
nouveau0: info: disp: 	0088: 00000000              
nouveau0: info: disp: 	008c: 00000000              
nouveau0: info: disp: 	0090: 00000000              
nouveau0: info: disp: 	0094: 00000000 -> f0000000
nouveau0: info: disp: 	00a0: 00000000              
nouveau0: info: disp: 	00a4: 00000000              
nouveau0: info: disp: 	00c0: 00000000 -> ffff0000
nouveau0: info: disp: 	00c4: 00000000              
nouveau0: info: disp: 	00c8: 00000000              
nouveau0: info: disp: 	00cc: 00000000              
nouveau0: info: disp: 	00e0: 00000000 -> 40000000
nouveau0: info: disp: 	00e4: 00000000              
nouveau0: info: disp: 	00e8: 00000000              
nouveau0: info: disp: 	00ec: 00000000              
nouveau0: info: disp: 	00fc: 00000000              
nouveau0: info: disp: 	0100: fffe0000              
nouveau0: info: disp: 	0104: 00000000              
nouveau0: info: disp: 	0110: 00000000              
nouveau0: info: disp: 	0114: 00000000              
nouveau0: info: disp: Base 1 - Image 0:
nouveau0: info: disp: 	0800: 00000000 -> 00000700
nouveau0: info: disp: 	0804: 00000000              
nouveau0: info: disp: 	0808: 00000000 -> 04b00780
nouveau0: info: disp: 	080c: 00000000 -> 00101e00
nouveau0: info: disp: 	0810: 0000e900 -> 0000cf00
nouveau0: info: disp: Base 1 - Image 1:
nouveau0: info: disp: 	0c00: 00000000 -> 00000700
nouveau0: info: disp: 	0c04: 00000000              
nouveau0: info: disp: 	0c08: 00000000 -> 04b00780
nouveau0: info: disp: 	0c0c: 00000000 -> 00101e00
nouveau0: info: disp: 	0c10: 0000e900 -> 0000cf00
wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
init: copying out path `/sbin/init' 11
dump_misc_init: max_paddr = 0x238000000
cd0(ixpide0:0:1):  Check Condition on CDB: 0x43 00 00 00 00 00 00 00 0c 40
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Field In CDB
cd0(ixpide0:0:1):  Check Condition on CDB: 0x28 00 00 00 00 00 00 00 01 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Logical Block Address Out Of Range
cd0d: error reading fsbn 0 of 0-3 (cd0 bn 0; cn 0 tn 0 sn 0)
cd0(ixpide0:0:1):  Check Condition on CDB: 0x43 00 00 00 00 00 00 00 0c 40
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Field In CDB
cd0: dos partition I/O error
ugen0 at uhub2 port 1
ugen0: CPS (0x764) CP1300EPFCLCD (0x501), rev 2.00/0.01, addr 2
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Holtek Semiconductor (0x4d9) USB Keyboard (0x1605), rev 1.10/1.01, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1
uhidev1: Holtek Semiconductor (0x4d9) USB Keyboard (0x1605), rev 1.10/1.01, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
bge0: link state DOWN (was UNKNOWN)
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
Accounting started
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
wd0a: error writing fsbn 14103312 of 14103312-14103319 (wd0 bn 14115600; cn 14003 tn 9 sn 9), xfer 460, retry 0
wd0: (aborted command, interface CRC error)
wd0a: requeue writing fsbn 14101920 of 14101920-14101951 (wd0 bn 14114208; cn 14002 tn 3 sn 3), xfer 168, retry 0
wd0a: requeue writing fsbn 14101800 of 14101800-14101807 (wd0 bn 14114088; cn 14002 tn 1 sn 9), xfer 298, retry 0
wd0a: requeue writing fsbn 14101952 of 14101952-14101983 (wd0 bn 14114240; cn 14002 tn 3 sn 35), xfer 3c8, retry 0
wd0a: requeue writing fsbn 14103304 of 14103304-14103311 (wd0 bn 14115592; cn 14003 tn 9 sn 1), xfer d0, retry 0
wd0a: requeue writing fsbn 14133312 of 14133312-14133327 (wd0 bn 14145600; cn 14033 tn 5 sn 21), xfer 200, retry 0
wd0g: requeue reading fsbn 535140544 of 535140544-535140671 (wd0 bn 736504000; cn 730658 tn 11 sn 43), xfer 330, retry 0
wd0: soft error (corrected) xfer 200
wd0: soft error (corrected) xfer d0
wd0: soft error (corrected) xfer 3c8
wd0: soft error (corrected) xfer 298
wd0: soft error (corrected) xfer 330
wd0: soft error (corrected) xfer 168
ahcisata0 port 1: device present, speed: 3.0Gb/s
wd0: soft error (corrected) xfer 460
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
wd1a: error writing fsbn 64778400 of 64778400-64778427 (wd1 bn 64790688; cn 64276 tn 7 sn 39), xfer 460, retry 0
wd1: (aborted command, interface CRC error)
wd1a: requeue writing fsbn 64868096 of 64868096-64868115 (wd1 bn 64880384; cn 64365 tn 7 sn 23), xfer 38, retry 0
wd1a: requeue writing fsbn 64868320 of 64868320-64868347 (wd1 bn 64880608; cn 64365 tn 10 sn 58), xfer 168, retry 0
wd1a: requeue writing fsbn 64778368 of 64778368-64778399 (wd1 bn 64790656; cn 64276 tn 7 sn 7), xfer 298, retry 0
wd1a: requeue writing fsbn 64868192 of 64868192-64868207 (wd1 bn 64880480; cn 64365 tn 8 sn 56), xfer d0, retry 0
wd1a: requeue writing fsbn 64778336 of 64778336-64778367 (wd1 bn 64790624; cn 64276 tn 6 sn 38), xfer 628, retry 0
wd1e: requeue writing fsbn 57833280 of 57833280-57833311 (wd1 bn 124962624; cn 123970 tn 13 sn 45), xfer 200, retry 0
wd1e: requeue writing fsbn 57836428 of 57836428-57836443 (wd1 bn 124965772; cn 123973 tn 15 sn 43), xfer 3c8, retry 0
wd1: soft error (corrected) xfer 3c8
wd1: soft error (corrected) xfer 200
wd1: soft error (corrected) xfer 628
wd1: soft error (corrected) xfer d0
wd1: soft error (corrected) xfer 298
wd1: soft error (corrected) xfer 168
wd1: soft error (corrected) xfer 38
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd1: soft error (corrected) xfer 460
wd1a: error writing fsbn 14579692 of 14579692-14579703 (wd1 bn 14591980; cn 14476 tn 2 sn 46), xfer d0, retry 0
wd1: (aborted command, interface CRC error)
wd1a: requeue writing fsbn 14579680 of 14579680-14579691 (wd1 bn 14591968; cn 14476 tn 2 sn 34), xfer 38, retry 0
wd1a: requeue writing fsbn 14618936 of 14618936-14618943 (wd1 bn 14631224; cn 14515 tn 1 sn 41), xfer 298, retry 0
wd1a: requeue writing fsbn 14618944 of 14618944-14618955 (wd1 bn 14631232; cn 14515 tn 1 sn 49), xfer 3c8, retry 0
wd1a: requeue writing fsbn 14580084 of 14580084-14580091 (wd1 bn 14592372; cn 14476 tn 8 sn 60), xfer 200, retry 0
wd1a: requeue writing fsbn 14566776 of 14566776-14566783 (wd1 bn 14579064; cn 14463 tn 5 sn 45), xfer 460, retry 0
wd1: soft error (corrected) xfer 460
wd1: soft error (corrected) xfer 200
wd1: soft error (corrected) xfer 3c8
wd1: soft error (corrected) xfer 298
wd1: soft error (corrected) xfer 38
wd1: soft error (corrected) xfer d0
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
wd0a: error writing fsbn 15440256 of 15440256-15440271 (wd0 bn 15452544; cn 15329 tn 14 sn 30), xfer 330, retry 0
wd0: (aborted command, interface CRC error)
wd0a: requeue writing fsbn 15466952 of 15466952-15466959 (wd0 bn 15479240; cn 15356 tn 6 sn 14), xfer d0, retry 0
wd0a: requeue writing fsbn 15440080 of 15440080-15440091 (wd0 bn 15452368; cn 15329 tn 11 sn 43), xfer 200, retry 0
wd0a: requeue writing fsbn 15440192 of 15440192-15440203 (wd0 bn 15452480; cn 15329 tn 13 sn 29), xfer 460, retry 0
wd0a: requeue writing fsbn 15404472 of 15404472-15404479 (wd0 bn 15416760; cn 15294 tn 6 sn 30), xfer 590, retry 0
wd0a: requeue writing fsbn 15404384 of 15404384-15404407 (wd0 bn 15416672; cn 15294 tn 5 sn 5), xfer 6c0, retry 0
wd0: soft error (corrected) xfer 460
wd0: soft error (corrected) xfer 200
wd0: soft error (corrected) xfer d0
wd0: soft error (corrected) xfer 6c0
wd0: soft error (corrected) xfer 590
wd0: soft error (corrected) xfer 330