NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

kern/54763: Card reader reports erros when SD card is inserted on ThinkPad X230



>Number:         54763
>Category:       kern
>Synopsis:       Card reader reports erros when SD card is inserted on ThinkPad X230
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Dec 14 17:55:00 +0000 2019
>Originator:     Sevan Janiyan
>Release:        HEAD
>Organization:
>Environment:
NetBSD 9.99.22 amd64 x86_64
>Description:
Onboard card reader is Ricoh 5U823 SD/MMC Controller according to kernel.
When a card is inserted, kernel reports:
sdhc0: cmd timeout error
sdmmc0: direct I/O error 60, r=6 p=0xffffa6013da34f5c write
sdmmc0: SD card status: 4-bit, C10, U1, A1
ld0 at sdmmc0: <0x03:0x5344:SC32G:0x80:0xa502c146:0x138>
ld0: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors
sdhc0: data end bit error
sdhc0: data crc error
ld0d: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0), retrying
sdhc0: data crc error
sdhc0: cmd timeout error
ld0d: error reading fsbn 196608 of 196608-196610 (ld0 bn 196608; cn 24 tn 48 sn 48), retrying
sdhc0: data end bit error
sdhc0: data crc error
sdhc0: cmd timeout error
ld0d: error reading fsbn 196608 of 196608-196610 (ld0 bn 196608; cn 24 tn 48 sn 48), retrying
sdhc0: auto_cmd12 error
sdhc0: data crc error
sdhc0: auto_cmd12 error
ld0d: error reading fsbn 196608 of 196608-196610 (ld0 bn 196608; cn 24 tn 48 sn 48), retrying
sdhc0: auto_cmd12 error
sdhc0: auto_cmd12 error
ld0d: error reading fsbn 196608 of 196608-196610 (ld0 bn 196608; cn 24 tn 48 sn 48), retrying
sdhc0: auto_cmd12 error
sdhc0: auto_cmd12 error
ld0d: error reading fsbn 196608 of 196608-196610 (ld0 bn 196608; cn 24 tn 48 sn 48), retrying
sdhc0: auto_cmd12 error
sdhc0: auto_cmd12 error
ld0d: error reading fsbn 196608 of 196608-196610 (ld0 bn 196608; cn 24 tn 48 sn 48)
sdhc0: auto_cmd12 error
sdhc0: auto_cmd12 error
ld0d: error reading fsbn 0 of 0-2 (ld0 bn 0; cn 0 tn 0 sn 0), retrying
sdhc0: auto_cmd12 error
sdhc0: auto_cmd12 error
ld0d: error reading fsbn 0 of 0-2 (ld0 bn 0; cn 0 tn 0 sn 0), retrying
sdhc0: auto_cmd12 error
sdhc0: auto_cmd12 error
ld0d: error reading fsbn 0 of 0-2 (ld0 bn 0; cn 0 tn 0 sn 0), retrying
sdhc0: auto_cmd12 error
sdhc0: auto_cmd12 error
ld0d: error reading fsbn 0 of 0-2 (ld0 bn 0; cn 0 tn 0 sn 0), retrying
sdhc0: auto_cmd12 error
sdhc0: auto_cmd12 error
ld0d: error reading fsbn 0 of 0-2 (ld0 bn 0; cn 0 tn 0 sn 0), retrying




Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 9.99.22 (SEVAN) #16: Thu Dec 12 22:55:30 GMT 2019
	:/usr/obj/amd64/sys/arch/amd64/compile/SEVAN
total memory = 16340 MB
avail memory = 15832 MB
pool redzone disabled for 'buf4k'
pool redzone disabled for 'buf64k'
cpu_rng: RDRAND
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 2324CTO (ThinkPad X230)
mainbus0 (root)
ACPI: RSDP 0x00000000000F65F0 000024 (v02 COREv4)
ACPI: XSDT 0x00000000BFF4C0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0x00000000BFF4F850 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000)
ACPI: DSDT 0x00000000BFF4C280 0035CE (v02 COREv4 COREBOOT 20110725 INTL 20160318)
ACPI: FACS 0x00000000BFF4C240 000040
ACPI: SSDT 0x00000000BFF4F950 001BEF (v02 COREv4 COREBOOT 0000002A CORE 0000002A)
ACPI: MCFG 0x00000000BFF51540 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
ACPI: TCPA 0x00000000BFF51580 000032 (v02 COREv4 COREBOOT 00000000 CORE 00000000)
ACPI: APIC 0x00000000BFF515C0 00006C (v02 COREv4 COREBOOT 00000000 CORE 00000000)
ACPI: DMAR 0x00000000BFF51630 0000A8 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
ACPI: HPET 0x00000000BFF536E0 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, id 0x306a9
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, id 0x306a9
cpu1: package 0, core 0, smt 1
cpu2 at mainbus0 apid 2
cpu2: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, id 0x306a9
cpu2: package 0, core 1, smt 0
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, id 0x306a9
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20190816
acpi0: X/RSDT: OemId <COREv4,COREBOOT,00000000>, AslId <CORE,00000000>
ACPI Error: No handler for Region [ERAM] (0xffffe42c84831ac8) [EmbeddedControl] (20190816/evregion-183)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20190816/exfldio-323)
ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.BAT0._STA due to previous error (AE_NOT_EXIST) (20190816/psparse-581)
ACPI Error: No handler for Region [ERAM] (0xffffe42c84831ac8) [EmbeddedControl] (20190816/evregion-183)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20190816/exfldio-323)
ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.BAT1._STA due to previous error (AE_NOT_EXIST) (20190816/psparse-581)
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): io 0x62,0x66
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (BOX3, 0x0000): ACPI Display Output Device
acpiout1 at acpivga0 (LEGA, 0x0000): ACPI Display Output Device
acpiout2 at acpivga0 (VGA0, 0x0100): ACPI Display Output Device
acpiout3 at acpivga0 (TV0, 0x0240): ACPI Display Output Device
acpiout4 at acpivga0 (LCD0, 0x0410): ACPI Display Output Device
acpiout4: brightness levels: [2,4-5,7,9,11,13,18,20,24,29,33,40,50,67,100]
acpivga0: autoconfiguration error: unknown output device acpiout0
acpivga0: autoconfiguration error: unknown output device acpiout1
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout2): VGA Analog Monitor, index 0, port 0, head 0, bios detect
acpivga0:   0x0240 (acpiout3): TV/HDTV Monitor, index 0, port 4, head 0, bios detect
acpivga0:   0x0410 (acpiout4): Int. Digital Flat Panel, index 0, port 1, head 0, bios detect
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat1 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
thinkpad0 at acpi0 (HKEY, IBM0068)
FWH (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
TPM (PNP0C31) at acpi0 not configured
acpitz0 at acpi0 (THM0): cpu0 cpu1 cpu2 cpu3
acpitz0: active cooling level 0: 80.0C
acpitz0: levels: critical 100.0 C, passive 90.0 C
acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
acpitz1 at acpi0 (THM1): cpu0 cpu1 cpu2 cpu3
acpitz1: levels: critical 99.0 C, passive 94.0 C, passive cooling
CTBL (BOOT0000) at acpi0 not configured
ACPI: Enabled 1 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 8.1
pms0: Extended W mode, Passthrough, Palm detect, One button click pad, Multi-finger Report, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Ivy Bridge Host Bridge (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: Intel Ivy Bridge Integrated Graphics Device (rev. 0x09)
Intel product 0153 (miscellaneous DASP, revision 0x09) at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0: Intel 7 Series USB xHCI (rev. 0x04)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
Intel 7 Series MEI Controller (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at msi1 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH, version 0.13.3
wm0: Ethernet address 3c:97:0e:
wm0: 0x6a4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL,EEE>
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: Intel 7 Series USB EHCI (rev. 0x04)
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi2 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0269
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 40ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: vendor 8086 product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: DP01 8ch: Digital Out [Jack]
hdafg1: DP02 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: Intel 7 Series PCIe (rev. 0xc4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci1 dev 0 function 0: Ricoh 5U823 SD/MMC Controller (rev. 0x04)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SDHC 3.0, rev 5, SDMA, 200000 kHz, HS SDR50 SDR104 HS200 3.3V, re-tuning mode 3, 512 byte blocks
sdmmc0 at sdhc0 slot 0
ppb1 at pci0 dev 28 function 1: Intel 7 Series PCIe (rev. 0xc4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: Intel Centrino Wireless-N 2200 (rev. 0xc4)
iwn0: interrupting at msi3 vec 0
iwn0: MIMO 2T2R, BGN, address 9c:4e:36:
ppb2 at pci0 dev 28 function 2: Intel 7 Series PCIe (rev. 0xc4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: Intel 7 Series USB EHCI (rev. 0x04)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel Mobile QM77 LPC (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: Intel 7 Series (mobile) SATA Controller (AHCI) (rev. 0x04)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xff30ff05<PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi4 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: Intel 7 Series SMBus Controller (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
Intel product 1e24 (miscellaneous DASP, revision 0x04) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x0000104a rev 0x4e
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  63 us, pow   500 mW
acpicpu0: C3: FFH, lat  90 us, pow   200 mW
acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 2601 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 35000 mW, 2600 MHz
acpicpu0: P2: FFH, lat  10 us, pow 31561 mW, 2400 MHz
acpicpu0: P3: FFH, lat  10 us, pow 28247 mW, 2200 MHz
acpicpu0: P4: FFH, lat  10 us, pow 25084 mW, 2000 MHz
acpicpu0: P5: FFH, lat  10 us, pow 22064 mW, 1800 MHz
acpicpu0: P6: FFH, lat  10 us, pow 19135 mW, 1600 MHz
acpicpu0: P7: FFH, lat  10 us, pow 16344 mW, 1400 MHz
acpicpu0: P8: FFH, lat  10 us, pow 13666 mW, 1200 MHz
acpicpu0: T0: FFH, lat   1 us, pow  1000 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow   940 mW,  94 %
acpicpu0: T2: FFH, lat   1 us, pow   880 mW,  88 %
acpicpu0: T3: FFH, lat   1 us, pow   820 mW,  82 %
acpicpu0: T4: FFH, lat   1 us, pow   760 mW,  75 %
acpicpu0: T5: FFH, lat   1 us, pow   700 mW,  69 %
acpicpu0: T6: FFH, lat   1 us, pow   640 mW,  63 %
acpicpu0: T7: FFH, lat   1 us, pow   580 mW,  57 %
acpicpu0: T8: FFH, lat   1 us, pow   520 mW,  50 %
acpicpu0: T9: FFH, lat   1 us, pow   460 mW,  44 %
acpicpu0: T10: FFH, lat   1 us, pow   400 mW,  38 %
acpicpu0: T11: FFH, lat   1 us, pow   340 mW,  32 %
acpicpu0: T12: FFH, lat   1 us, pow   280 mW,  25 %
acpicpu0: T13: FFH, lat   1 us, pow   220 mW,  19 %
acpicpu0: T14: FFH, lat   1 us, pow   160 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2594237480 Hz quality 3000
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
acpiacad0: AC adapter offline.
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
IPsec: Initialized Security Association Processing.
uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
ugen0 at uhub1 port 1
ugen0: Yubico (0x1050) Yubikey 4 OTP+U2F+CCID (0x407), rev 2.00/4.37, addr 1
wd0 at atabus0 drive 0
wd0: <INTEL SSDSC2KW512G8>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 476 GB, 992277 cyl, 16 head, 63 sec, 512 bytes/sect x 1000215216 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uhub4 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
uhub5 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub5: single transaction translator
uhub5: 6 ports with 6 removable, self powered
ubt0 at uhub5 port 4
ubt0: Broadcom Corp (0xa5c) BCM20702A0 (0x21e6), rev 2.00/1.12, addr 3
uvideo0 at uhub5 port 6 configuration 1 interface 0: Ricoh Company Ltd. (0x5986) Integrated Camera (0x2d2), rev 2.00/0.11, addr 4
video0 at uvideo0pool redzone disabled for 'video'
: Ricoh Company Ltd. (0x5986) Integrated Camera (0x2d2), rev 2.00/0.11, addr 4
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
md0: internal 5000 KB image area
root on md0a dumps on md0b
root file system type: ffs
kern.module.path=/stand/amd64/9.99.22/modules
kern info: [drm] Memory usable by graphics device = 2048M
WARNING: clock gained 2 days
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
kern info: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffa6013e414000, size 1366x768, depth 32, stride 5504
kern error: [drm:(/sandbox/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:230)cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
kern error: [drm:(/sandbox/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:381)intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder A FIFO underrun
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
WARNING: ZFS on NetBSD is under development
ZFS filesystem version: 5
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
>How-To-Repeat:
Insert an SD card into a ThinkPad x230
>Fix:



Home | Main Index | Thread Index | Old Index