NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kern/54289: wd1 fails to be identified properly
Hi,
This commit fixes the bug:
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/dev/ic/ahcisata_core.c.diff?r1=1.75&r2=1.76&only_with_tag=MAIN&f=h
, thus current branch already always recognize second hard drive
properly and there's no slow down on hard drive detection on POST BIOS
during reboot as well. For testing purposes I added the line to
netbsd-9 code, it also fixed the issue. Would be great, if the change
would be pulled up to netbsd-9 branch.
Regards,
Andrius V
On Thu, Aug 15, 2019 at 1:10 PM <jdbaker%consolidated.net@localhost> wrote:
>
> The following reply was made to PR kern/54289; it has been noted by GNATS.
>
> From: jdbaker%consolidated.net@localhost
> To: gnats-bugs%netbsd.org@localhost
> Cc:
> Subject: Re: kern/54289: wd1 fails to be identified properly
> Date: Thu, 15 Aug 2019 05:07:47 -0500
>
> In case it helps figure the issue out, below is the full 'dmesg' output:
>
> [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
> 2003, 2004, 2005,
> [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
> 2015, 2016, 2017,
> [ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights
> reserved.
> [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
> [ 1.0000000] The Regents of the University of California. All
> rights reserved.
>
> [ 1.0000000] NetBSD 9.0_BETA (YGGDRASIL) #6: Wed Aug 14 01:16:13 CDT
> 2019
> [ 1.0000000]
> sysop%yggdrasil.technoskunk.fur@localhost:/r0/build/netbsd-9/obj/amd64/sys/arch/amd64/compile/YGGDRASIL
> [ 1.0000000] total memory = 3573 MB
> [ 1.0000000] avail memory = 3457 MB
> [ 1.0000000] rnd: seeded with 128 bits
> [ 1.0000000] timecounter: Timecounters tick every 10.000 msec
> [ 1.0000000] WARNING: module error: built-in module spkr can't find
> builtin dependency `audio'
> [ 1.0000000] WARNING: module error: built-in module spkr prerequisite
> audio failed, error 2
> [ 1.0000000] Kernelized RAIDframe activated
> [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done
> [ 1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
> quality 100
> [ 1.0000030] EMACHINES W3609 (400)
> [ 1.0000030] mainbus0 (root)
> [ 1.0000030] ACPI: RSDP 0x00000000000FE020 000014 (v00 GATEWA)
> [ 1.0000030] ACPI: RSDT 0x00000000DF6FE038 000040 (v01 GATEWA SYSTEM
> 0000001C 01000013)
> [ 1.0000030] ACPI: FACP 0x00000000DF6FD000 000074 (v01 GATEWA SYSTEM
> 0000001C MSFT 01000013)
> [ 1.0000030] ACPI: DSDT 0x00000000DF6F8000 0040B2 (v01 GATEWA SYSTEM
> 0000001C MSFT 01000013)
> [ 1.0000030] ACPI: FACS 0x00000000DF6AA000 000040
> [ 1.0000030] ACPI: APIC 0x00000000DF6F7000 000078 (v01 GATEWA SYSTEM
> 0000001C MSFT 01000013)
> [ 1.0000030] ACPI: WDDT 0x00000000DF6F6000 000040 (v01 GATEWA SYSTEM
> 0000001C MSFT 01000013)
> [ 1.0000030] ACPI: MCFG 0x00000000DF6F5000 00003C (v01 GATEWA SYSTEM
> 0000001C MSFT 01000013)
> [ 1.0000030] ACPI: ASF! 0x00000000DF6F4000 0000A6 (v32 GATEWA SYSTEM
> 0000001C MSFT 01000013)
> [ 1.0000030] ACPI: HPET 0x00000000DF6F3000 000038 (v01 GATEWA SYSTEM
> 0000001C MSFT 01000013)
> [ 1.0000030] ACPI: SLIC 0x00000000DF6F2000 000176 (v01 GATEWA SYSTEM
> 0000001C MSFT 01000013)
> [ 1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded
> [ 1.0000030] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20,
> 24 pins
> [ 1.0000030] cpu0 at mainbus0 apid 0
> [ 1.0000030] cpu0: Intel(R) Celeron(R) D CPU 430 @ 1.80GHz, id
> 0x10661
> [ 1.0000030] cpu0: package 0, core 0, smt 0
> [ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20190405
> [ 1.0000030] acpi0: X/RSDT: OemId <GATEWA,SYSTEM ,0000001c>, AslId <
> ,01000013>
> [ 1.0000030] acpi0: MCFG: segment 0, bus 0-63, address
> 0x00000000f0000000
> [ 1.0000030] acpi0: SCI interrupting at int 9
> [ 1.0000030] acpi0: fixed power button present
> [ 1.0000030] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz
> quality 1000
> [ 1.0199924] hpet0 at acpi0: high precision event timer (mem
> 0xfed00000-0xfed00400)
> [ 1.0199924] timecounter: Timecounter "hpet0" frequency 14318180 Hz
> quality 2000
> [ 1.0201435] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
> [ 1.0201435] IOCM (PNP0C02) [Motherboard Register Resources] at acpi0
> not configured
> [ 1.0201435] attimer0 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53
> irq 0
> [ 1.0201435] pcppi0 at acpi0 (SPKR, PNP0800): io 0x61
> [ 1.0201435] spkr0 at pcppi0: PC Speaker
> [ 1.0201435] wsbell at spkr0 not configured
> [ 1.0201435] sysbeep0 at pcppi0
> [ 1.0201435] XTRA (PNP0C02) [Motherboard Register Resources] at acpi0
> not configured
> [ 1.0201435] lpt0 at acpi0 (LPT, PNP0400): io 0x378-0x37f irq 7
> [ 1.0201435] pckbc0 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64
> irq 1
> [ 1.0201435] com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
> [ 1.0201435] com0: ns16550a, working fifo
> [ 1.0201435] APIC (PNP0003) [APIC] at acpi0 not configured
> [ 1.0201435] ACPI: Enabled 2 GPEs in block 00 to 1F
> [ 1.0201435] acpi0: [MADT] LAPIC : CPU ID 1, LAPIC ID 0,
> FLAGS 0x01
> [ 1.0201435] acpi0: [MADT] LAPIC : CPU ID 2, LAPIC ID 129,
> FLAGS 0x00
> [ 1.0201435] acpi0: [MADT] LAPIC : CPU ID 3, LAPIC ID 130,
> FLAGS 0x00
> [ 1.0201435] acpi0: [MADT] LAPIC : CPU ID 4, LAPIC ID 131,
> FLAGS 0x00
> [ 1.0201435] acpi0: [MADT] I/O APIC : ID 2, GSI 0, ADDR
> 0xFEC00000
> [ 1.0201435] acpi0: [MADT] INTR OVERRIDE : BUS 0, IRQ 0, GSI 2, FLAGS
> 0x00
> [ 1.0201435] acpi0: [MADT] INTR OVERRIDE : BUS 0, IRQ 9, GSI 9, FLAGS
> 0x0D
> [ 1.0201435] acpi0: [MADT] LAPIC NMI : CPU ID 1, LINT 1, FLAGS
> 0x00
> [ 1.0201435] acpi0: [MADT] LAPIC NMI : CPU ID 2, LINT 1, FLAGS
> 0x00
> [ 1.0201435] acpi0: [FADT] FACS : 0x00000000DF6AA000
> [ 1.0201435] acpi0: [FADT] DSDT : 0x00000000DF6F8000
> [ 1.0201435] acpi0: [FADT] INT_MODEL : 0x0000000000000001
> [ 1.0201435] acpi0: [FADT] PM_PROFILE : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] SCI_INT : 0x0000000000000009
> [ 1.0201435] acpi0: [FADT] SMI_CMD : 0x00000000000000B2
> [ 1.0201435] acpi0: [FADT] ACPI_ENABLE : 0x00000000000000A0
> [ 1.0201435] acpi0: [FADT] ACPI_DISABLE : 0x00000000000000A1
> [ 1.0201435] acpi0: [FADT] S4BIOS_REQ : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] PSTATE_CNT : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] PM1a_EVT_BLK : 0x0000000000000400
> [ 1.0201435] acpi0: [FADT] PM1b_EVT_BLK : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] PM1a_CNT_BLK : 0x0000000000000404
> [ 1.0201435] acpi0: [FADT] PM1b_CNT_BLK : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] PM2_CNT_BLK : 0x0000000000000420
> [ 1.0201435] acpi0: [FADT] PM_TMR_BLK : 0x0000000000000408
> [ 1.0201435] acpi0: [FADT] GPE0_BLK : 0x0000000000000428
> [ 1.0201435] acpi0: [FADT] GPE1_BLK : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] PM1_EVT_LEN : 0x0000000000000004
> [ 1.0201435] acpi0: [FADT] PM1_CNT_LEN : 0x0000000000000002
> [ 1.0201435] acpi0: [FADT] PM2_CNT_LEN : 0x0000000000000001
> [ 1.0201435] acpi0: [FADT] PM_TMR_LEN : 0x0000000000000004
> [ 1.0201435] acpi0: [FADT] GPE0_BLK_LEN : 0x0000000000000008
> [ 1.0201435] acpi0: [FADT] GPE1_BLK_LEN : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] GPE1_BASE : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] CST_CNT : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] P_LVL2_LAT : 0x0000000000000065
> [ 1.0201435] acpi0: [FADT] P_LVL3_LAT : 0x00000000000003E9
> [ 1.0201435] acpi0: [FADT] FLUSH_SIZE : 0x0000000000000400
> [ 1.0201435] acpi0: [FADT] FLUSH_STRIDE : 0x0000000000000010
> [ 1.0201435] acpi0: [FADT] DUTY_OFFSET : 0x0000000000000001
> [ 1.0201435] acpi0: [FADT] DUTY_WIDTH : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] DAY_ALRM : 0x000000000000000D
> [ 1.0201435] acpi0: [FADT] MON_ALRM : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] CENTURY : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] IAPC_BOOT_ARCH : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] RESET_VALUE : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] ARM_BOOT_ARCH : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] X_FACS : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] X_DSDT : 0x00000000DF6F8000
> [ 1.0201435] acpi0: [FADT] RESET_REG : 0x0000000000000000, SPACE
> ID 0, BIT WIDTH 0, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] X_PM1a_EVT_BLK : 0x0000000000000400, SPACE
> ID 1, BIT WIDTH 32, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] X_PM1b_EVT_BLK : 0x0000000000000000, SPACE
> ID 0, BIT WIDTH 0, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] X_PM1a_CNT_BLK : 0x0000000000000404, SPACE
> ID 1, BIT WIDTH 16, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] X_PM1b_CNT_BLK : 0x0000000000000000, SPACE
> ID 0, BIT WIDTH 0, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] X_PM2_CNT_BLK : 0x0000000000000420, SPACE
> ID 1, BIT WIDTH 8, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] X_PM_TMR_BLK : 0x0000000000000408, SPACE
> ID 1, BIT WIDTH 32, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] X_GPE0_BLK : 0x0000000000000428, SPACE
> ID 1, BIT WIDTH 64, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] X_GPE1_BLK : 0x0000000000000000, SPACE
> ID 0, BIT WIDTH 0, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] SLEEP_CTRL_REG : 0x0000000000000000, SPACE
> ID 0, BIT WIDTH 0, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] SLEEP_STAT_REG : 0x0000000000000000, SPACE
> ID 0, BIT WIDTH 0, BIT OFFSET 0, ACCESS WIDTH 0
> [ 1.0201435] acpi0: [FADT] WBINVD : 0x0000000000000001
> [ 1.0201435] acpi0: [FADT] WBINVD_FLUSH : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] PROC_C1 : 0x0000000000000004
> [ 1.0201435] acpi0: [FADT] P_LVL2_UP : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] PWR_BUTTON : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] SLP_BUTTON : 0x0000000000000020
> [ 1.0201435] acpi0: [FADT] FIX_RTC : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] RTC_S4 : 0x0000000000000080
> [ 1.0201435] acpi0: [FADT] TMR_VAL_EXT : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] DCK_CAP : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] RESET_REG_SUP : 0x0000000000000400
> [ 1.0201435] acpi0: [FADT] SEALED_CASE : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] HEADLESS : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] CPU_SW_SLP : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] PCI_EXP_WAK : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] PLATFORM_CLK : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] S4_RTC_STS : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] REMOTE_POWER : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] APIC_CLUSTER : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] APIC_PHYSICAL : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] HW_REDUCED : 0x0000000000000000
> [ 1.0201435] acpi0: [FADT] LOW_POWER_S0 : 0x0000000000000000
> [ 1.0201435] acpi0: [\ ] HID - UID - ADR -
> [ 1.0201435] acpi0: [CPU0] HID - UID - ADR -
> [ 1.0201435] acpi0: [CPU1] HID - UID - ADR -
> [ 1.0201435] acpi0: [CPU2] HID - UID - ADR -
> [ 1.0201435] acpi0: [CPU3] HID - UID - ADR -
> [ 1.0201435] acpi0: [_SB ] HID - UID - ADR -
> [ 1.0201435] acpi0: [SLPB] HID PNP0C0E UID - ADR -
> [ 1.0201435] acpi0: [PCI0] HID PNP0A03 UID - ADR
> 0x0000000000000000
> [ 1.0201435] acpi0: [IOCM] HID PNP0C02 UID 3 ADR -
> [ 1.0201435] acpi0: [P32 ] HID - UID - ADR
> 0x00000000001E0000
> [ 1.0201435] acpi0: [LPC ] HID - UID - ADR
> 0x00000000001F0000
> [ 1.0201435] acpi0: [LNKA] HID PNP0C0F UID 1 ADR -
> [ 1.0201435] acpi0: [LNKB] HID PNP0C0F UID 2 ADR -
> [ 1.0201435] acpi0: [LNKC] HID PNP0C0F UID 3 ADR -
> [ 1.0201435] acpi0: [LNKD] HID PNP0C0F UID 4 ADR -
> [ 1.0201435] acpi0: [LNKE] HID PNP0C0F UID 5 ADR -
> [ 1.0201435] acpi0: [LNKF] HID PNP0C0F UID 6 ADR -
> [ 1.0201435] acpi0: [LNKG] HID PNP0C0F UID 7 ADR -
> [ 1.0201435] acpi0: [LNKH] HID PNP0C0F UID 8 ADR -
> [ 1.0201435] acpi0: [DMAC] HID PNP0200 UID - ADR -
> [ 1.0201435] acpi0: [RTC ] HID PNP0B00 UID - ADR -
> [ 1.0201435] acpi0: [PIC ] HID PNP0000 UID - ADR -
> [ 1.0201435] acpi0: [FPU ] HID PNP0C04 UID - ADR -
> [ 1.0201435] acpi0: [TMR ] HID PNP0100 UID - ADR -
> [ 1.0201435] acpi0: [SPKR] HID PNP0800 UID - ADR -
> [ 1.0201435] acpi0: [XTRA] HID PNP0C02 UID 1 ADR -
> [ 1.0201435] acpi0: [TPM ] HID PNP0C31 UID 1 ADR -
> [ 1.0201435] acpi0: [XTR2] HID PNP0C02 UID 2 ADR -
> [ 1.0201435] acpi0: [FDC0] HID PNP0700 UID - ADR -
> [ 1.0201435] acpi0: [LPT ] HID PNP0400 UID - ADR -
> [ 1.0201435] acpi0: [ECP ] HID PNP0401 UID - ADR -
> [ 1.0201435] acpi0: [PS2M] HID PNP0F03 UID - ADR -
> [ 1.0201435] acpi0: [PS2K] HID PNP0303 UID - ADR -
> [ 1.0201435] acpi0: [UAR1] HID PNP0501 UID 1 ADR -
> [ 1.0201435] acpi0: [IELK] HID AWY0001 UID - ADR -
> [ 1.0201435] acpi0: [PEX0] HID - UID - ADR
> 0x00000000001C0000
> [ 1.0201435] acpi0: [PEX1] HID - UID - ADR
> 0x00000000001C0001
> [ 1.0201435] acpi0: [PEX2] HID - UID - ADR
> 0x00000000001C0002
> [ 1.0201435] acpi0: [PEX3] HID - UID - ADR
> 0x00000000001C0003
> [ 1.0201435] acpi0: [PEX4] HID - UID - ADR
> 0x00000000001C0004
> [ 1.0201435] acpi0: [PEX5] HID - UID - ADR
> 0x00000000001C0005
> [ 1.0201435] acpi0: [APIC] HID PNP0003 UID - ADR -
> [ 1.0201435] acpi0: [HPET] HID PNP0103 UID - ADR -
> [ 1.0201435] acpi0: [UHC1] HID - UID - ADR
> 0x00000000001D0000
> [ 1.0201435] acpi0: [UHC2] HID - UID - ADR
> 0x00000000001D0001
> [ 1.0201435] acpi0: [UHC3] HID - UID - ADR
> 0x00000000001D0002
> [ 1.0201435] acpi0: [UHC4] HID - UID - ADR
> 0x00000000001D0003
> [ 1.0201435] acpi0: [EHCI] HID - UID - ADR
> 0x00000000001D0007
> [ 1.0201435] acpi0: [AC9M] HID - UID - ADR
> 0x00000000001E0003
> [ 1.0201435] acpi0: [AZAL] HID - UID - ADR
> 0x00000000001B0000
> [ 1.0201435] acpi0: [IDEC] HID - UID - ADR
> 0x00000000001F0001
> [ 1.0201435] acpi0: [PRID] HID - UID - ADR
> 0x0000000000000000
> [ 1.0201435] acpi0: [P_D0] HID - UID - ADR
> 0x0000000000000000
> [ 1.0201435] acpi0: [P_D1] HID - UID - ADR
> 0x0000000000000001
> [ 1.0201435] acpi0: [IDES] HID - UID - ADR
> 0x00000000001F0002
> [ 1.0201435] acpi0: [PRID] HID - UID - ADR
> 0x0000000000000000
> [ 1.0201435] acpi0: [P_D0] HID - UID - ADR
> 0x0000000000000000
> [ 1.0201435] acpi0: [P_D1] HID - UID - ADR
> 0x0000000000000001
> [ 1.0201435] acpi0: [SECD] HID - UID - ADR
> 0x0000000000000001
> [ 1.0201435] acpi0: [S_D0] HID - UID - ADR
> 0x0000000000000000
> [ 1.0201435] acpi0: [S_D1] HID - UID - ADR
> 0x0000000000000001
> [ 1.0201435] acpi0: [_TZ ] HID - UID - ADR -
>
> [ 1.0201435] \ [06] []
> [ 1.0201435] CPU0 [12] []
> [ 1.0201435] CPU1 [12] []
> [ 1.0201435] CPU2 [12] []
> [ 1.0201435] CPU3 [12] []
> [ 1.0201435] _SB [06] []
> [ 1.0201435] SLPB [06] [] <acpibut0>
> [ 1.0201435] PCI0 [06] [] (PCI) @ 0x00:0x00:0x00:0x00 [R] [B]
> -> 0x00:0x00
> [ 1.0201435] IOCM [06] []
> [ 1.0201435] P32 [06] [] (PCI) @ 0x00:0x00:0x1E:0x00 [B]
> -> 0x00:0x08
> [ 1.0201435] LPC [06] [] (PCI) @ 0x00:0x00:0x1F:0x00
> [ 1.0201435] LNKA [06] []
> [ 1.0201435] LNKB [06] []
> [ 1.0201435] LNKC [06] []
> [ 1.0201435] LNKD [06] []
> [ 1.0201435] LNKE [06] []
> [ 1.0201435] LNKF [06] []
> [ 1.0201435] LNKG [06] []
> [ 1.0201435] LNKH [06] []
> [ 1.0201435] DMAC [06] []
> [ 1.0201435] RTC [06] []
> [ 1.0201435] PIC [06] []
> [ 1.0201435] FPU [06] []
> [ 1.0201435] TMR [06] [] <attimer0>
> [ 1.0201435] SPKR [06] [] <pcppi0>
> [ 1.0201435] XTRA [06] []
> [ 1.0201435] TPM [06] []
> [ 1.0201435] XTR2 [06] []
> [ 1.0201435] FDC0 [06] []
> [ 1.0201435] LPT [06] [] <lpt0>
> [ 1.0201435] ECP [06] []
> [ 1.0201435] PS2M [06] []
> [ 1.0201435] PS2K [06] [] <pckbc0>
> [ 1.0201435] UAR1 [06] [] <com0>
> [ 1.0201435] IELK [06] []
> [ 1.0201435] PEX0 [06] [] (PCI) @ 0x00:0x00:0x1C:0x00 [B]
> -> 0x00:0x02
> [ 1.0201435] PEX1 [06] [] (PCI) @ 0x00:0x00:0x1C:0x01
> [ 1.0201435] PEX2 [06] [] (PCI) @ 0x00:0x00:0x1C:0x02 [B]
> -> 0x00:0x03
> [ 1.0201435] PEX3 [06] [] (PCI) @ 0x00:0x00:0x1C:0x03 [B]
> -> 0x00:0x04
> [ 1.0201435] PEX4 [06] [] (PCI) @ 0x00:0x00:0x1C:0x04 [B]
> -> 0x00:0x06
> [ 1.0201435] PEX5 [06] [] (PCI) @ 0x00:0x00:0x1C:0x05 [B]
> -> 0x00:0x07
> [ 1.0201435] APIC [06] []
> [ 1.0201435] HPET [06] []
> [ 1.0201435] UHC1 [06] [] (PCI) @ 0x00:0x00:0x1D:0x00
> [ 1.0201435] UHC2 [06] [] (PCI) @ 0x00:0x00:0x1D:0x01
> [ 1.0201435] UHC3 [06] [] (PCI) @ 0x00:0x00:0x1D:0x02
> [ 1.0201435] UHC4 [06] [] (PCI) @ 0x00:0x00:0x1D:0x03
> [ 1.0201435] EHCI [06] [] (PCI) @ 0x00:0x00:0x1D:0x07
> [ 1.0201435] AC9M [06] [] (PCI) @ 0x00:0x00:0x1E:0x03
> [ 1.0201435] AZAL [06] [] (PCI) @ 0x00:0x00:0x1B:0x00
> [ 1.0201435] IDEC [06] [] (PCI) @ 0x00:0x00:0x1F:0x01
> [ 1.0201435] PRID [06] []
> [ 1.0201435] P_D0 [06] []
> [ 1.0201435] P_D1 [06] []
> [ 1.0201435] IDES [06] [] (PCI) @ 0x00:0x00:0x1F:0x02
> [ 1.0201435] PRID [06] []
> [ 1.0201435] P_D0 [06] []
> [ 1.0201435] P_D1 [06] []
> [ 1.0201435] SECD [06] []
> [ 1.0201435] S_D0 [06] []
> [ 1.0201435] S_D1 [06] []
> [ 1.0201435] _TZ [06] []
> [ 1.0201435] attimer0: attached to pcppi0
> [ 1.0201435] pckbd0 at pckbc0 (kbd slot)
> [ 1.0201435] pckbc0: using irq 1 for kbd slot
> [ 1.0201435] wskbd0 at pckbd0: console keyboard
> [ 1.0201435] pci0 at mainbus0 bus 0: configuration mode 1
> [ 1.0201435] pci0: i/o space, memory space enabled, rd/line, rd/mult,
> wr/inv ok
> [ 1.0201435] pchb0 at pci0 dev 0 function 0: Intel 82945G/P Memory
> Controller Hub (rev. 0x02)
> [ 1.0201435] agp0 at pchb0: i915-family chipset
> [ 1.0201435] agp0: detected 7932k stolen memory
> [ 1.0201435] agp0: autoconfiguration error: BAR size 20000 mismatches
> detected GTT size 40000; trusting BAR
> [ 1.0201435] agp0: aperture at 0xe0000000, size 0x8000000
> [ 1.0201435] ppb0 at pci0 dev 1 function 0: Intel 82945G/P PCI Express
> Bridge (rev. 0x02)
> [ 1.0201435] ppb0: PCI Express capability version 1 <Root Port of
> PCI-E Root Complex> x16 @ 2.5GT/s
> [ 1.0201435] pci1 at ppb0 bus 1
> [ 1.0201435] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> [ 1.0201435] wm0 at pci1 dev 0 function 0: Intel i82574L (rev. 0x00)
> [ 1.0201435] wm0: interrupting at msi0 vec 0
> [ 1.0201435] wm0: PCI-Express bus
> [ 1.0201435] wm0: 2048 words FLASH, version 1.8.0, Image Unique ID
> 0000ffff
> [ 1.0201435] wm0: ASPM L0s and L1 are disabled to workaround the
> errata.
> [ 1.0201435] wm0: Ethernet address 00:1b:21:b0:77:10
> [ 1.0201435] wm0: 0x224480<FLASH,IOH_VALID,PCIE,ASF_FIRM,WOL>
> [ 1.0201435] makphy0 at wm0 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
> [ 1.0201435] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT, 1000baseT-FDX, auto
> [ 1.0201435] vga0 at pci0 dev 2 function 0: Intel 82945G/P Integrated
> Graphics Device (rev. 0x02)
> [ 1.0201435] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100
> emulation), using wskbd0
> [ 1.0201435] wsmux1: connecting to wsdisplay0
> [ 1.0201435] drm at vga0 not configured
> [ 1.0201435] ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI
> Express Port #1 (rev. 0x01)
> [ 1.0201435] ppb1: PCI Express capability version 1 <Root Port of
> PCI-E Root Complex> x1 @ 2.5GT/s
> [ 1.0201435] pci2 at ppb1 bus 2
> [ 1.0201435] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> [ 1.0201435] ppb2 at pci0 dev 28 function 2: Intel 82801GB/GR PCI
> Express Port #3 (rev. 0x01)
> [ 1.0201435] ppb2: PCI Express capability version 1 <Root Port of
> PCI-E Root Complex> x1 @ 2.5GT/s
> [ 1.0201435] pci3 at ppb2 bus 3
> [ 1.0201435] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> [ 1.0201435] ppb3 at pci0 dev 28 function 3: Intel 82801GB/GR PCI
> Express Port #4 (rev. 0x01)
> [ 1.0201435] ppb3: PCI Express capability version 1 <Root Port of
> PCI-E Root Complex> x1 @ 2.5GT/s
> [ 1.0201435] pci4 at ppb3 bus 4
> [ 1.0201435] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
> [ 1.0201435] ppb4 at pci4 dev 0 function 0: Pericom Semiconductors
> PI7C9X111SL PCIe to PCI Reverse Bridge (rev. 0x02)
> [ 1.0201435] ppb4: PCI Express capability version 1 <PCI-E to
> PCI/PCI-X Bridge>
> [ 1.0201435] pci5 at ppb4 bus 5
> [ 1.0201435] pci5: i/o space, memory space enabled, rd/line, wr/inv ok
> [ 1.0201435] siisata0 at pci5 dev 4 function 0: CMD Technology SiI3124
> SATALink (rev. 0x02)
> [ 1.0201435] siisata0: interrupting at msi1 vec 0
> [ 1.0201435] siisata0: SiI3124, 3.0Gb/s
> [ 1.0201435] siisata0: 32-bit 66MHz PCI
> [ 1.0201435] atabus0 at siisata0 channel 0
> [ 1.0201435] atabus1 at siisata0 channel 1
> [ 1.0201435] atabus2 at siisata0 channel 2
> [ 1.0201435] atabus3 at siisata0 channel 3
> [ 1.0201435] ppb5 at pci0 dev 28 function 4: Intel 82801GB/GR PCI
> Express Port #5 (rev. 0x01)
> [ 1.0201435] ppb5: PCI Express capability version 1 <Root Port of
> PCI-E Root Complex> x1 @ 2.5GT/s
> [ 1.0201435] pci6 at ppb5 bus 6
> [ 1.0201435] pci6: i/o space, memory space enabled, rd/line, wr/inv ok
> [ 1.0201435] ppb6 at pci0 dev 28 function 5: Intel 82801GB/GR PCI
> Express Port #6 (rev. 0x01)
> [ 1.0201435] ppb6: PCI Express capability version 1 <Root Port of
> PCI-E Root Complex> x1 @ 2.5GT/s
> [ 1.0201435] pci7 at ppb6 bus 7
> [ 1.0201435] pci7: i/o space, memory space enabled, rd/line, wr/inv ok
> [ 1.0201435] uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB
> UHCI Controller (rev. 0x01)
> [ 1.0201435] uhci0: interrupting at ioapic0 pin 23
> [ 1.0201435] usb0 at uhci0: USB revision 1.0
> [ 1.0201435] uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB
> UHCI Controller (rev. 0x01)
> [ 1.0201435] uhci1: interrupting at ioapic0 pin 19
> [ 1.0201435] usb1 at uhci1: USB revision 1.0
> [ 1.0201435] uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB
> UHCI Controller (rev. 0x01)
> [ 1.0201435] uhci2: interrupting at ioapic0 pin 18
> [ 1.0201435] usb2 at uhci2: USB revision 1.0
> [ 1.0201435] uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB
> UHCI Controller (rev. 0x01)
> [ 1.0201435] uhci3: interrupting at ioapic0 pin 16
> [ 1.0201435] usb3 at uhci3: USB revision 1.0
> [ 1.0201435] ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB
> EHCI Controller (rev. 0x01)
> [ 1.0201435] ehci0: interrupting at ioapic0 pin 23
> [ 1.0201435] ehci0: EHCI version 1.0
> [ 1.0201435] ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1
> uhci2 uhci3
> [ 1.0201435] usb4 at ehci0: USB revision 2.0
> [ 1.0201435] ppb7 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI
> Bridge (rev. 0xe1)
> [ 1.0201435] pci8 at ppb7 bus 8
> [ 1.0201435] pci8: i/o space, memory space enabled
> [ 1.0201435] ichlpcib0 at pci0 dev 31 function 0: Intel 82801GH LPC
> Interface Bridge (rev. 0x01)
> [ 1.0201435] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz
> quality 1000
> [ 1.0201435] ichlpcib0: 24-bit timer
> [ 1.0201435] tco0 at ichlpcib0: TCO (watchdog) timer configured.
> [ 1.0201435] tco0: Min/Max interval 1/367 seconds
> [ 1.0201435] piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE
> Controller (ICH7) (rev. 0x01)
> [ 1.0201435] piixide0: bus-master DMA support present
> [ 1.0201435] piixide0: primary channel configured to compatibility
> mode
> [ 1.0201435] piixide0: primary channel interrupting at ioapic0 pin 14
> [ 1.0201435] atabus4 at piixide0 channel 0
> [ 1.0201435] piixide0: secondary channel configured to compatibility
> mode
> [ 1.0201435] piixide0: secondary channel ignored (disabled)
> [ 1.0201435] ahcisata0 at pci0 dev 31 function 2: Intel 82801GB/GR
> AHCI SATA Controller (rev. 0x01)
> [ 1.0201435] ahcisata0: 64-bit DMA
> [ 1.0201435] ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP
> 0xc320ff03<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SNCQ,S64A>
> [ 1.0201435] ahcisata0: interrupting at msi2 vec 0
> [ 1.0201435] atabus5 at ahcisata0 channel 0
> [ 1.0201435] atabus6 at ahcisata0 channel 1
> [ 1.0201435] atabus7 at ahcisata0 channel 2
> [ 1.0201435] atabus8 at ahcisata0 channel 3
> [ 1.0201435] ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus
> Controller (rev. 0x01)
> [ 1.0201435] ichsmb0: interrupting at ioapic0 pin 19
> [ 1.0201435] iic0 at ichsmb0: I2C bus
> [ 1.0201435] spdmem0 at iic0 addr 0x50
> [ 1.0201435] spdmem0: DDR2 SDRAM, no parity or ECC, 2GB, 667MHz
> (PC2-5300)
> [ 1.0201435] spdmem0: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 3.00ns
> cycle time
> [ 1.0201435] spdmem0: tAA-tRCD-tRP-tRAS: 5-5-5-15
> [ 1.0201435] spdmem0: voltage SSTL 1.8V, refresh time 7.8us
> (self-refreshing)
> [ 1.0201435] spdmem1 at iic0 addr 0x52
> [ 1.0201435] spdmem1: DDR2 SDRAM, no parity or ECC, 2GB, 667MHz
> (PC2-5300)
> [ 1.0201435] spdmem1: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 3.00ns
> cycle time
> [ 1.0201435] spdmem1: tAA-tRCD-tRP-tRAS: 5-5-5-15
> [ 1.0201435] spdmem1: voltage SSTL 1.8V, refresh time 7.8us
> (self-refreshing)
> [ 1.0201435] isa0 at ichlpcib0
> [ 1.0201435] acpicpu0 at cpu0: ACPI CPU
> [ 1.0201435] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
> [ 1.0201435] coretemp0 at cpu0: thermal sensor, 1 C resolution,
> Tjmax=100
> [ 1.0201435] timecounter: Timecounter "clockinterrupt" frequency 100
> Hz quality 0
> [ 1.7033614] IPsec: Initialized Security Association Processing.
> [ 1.7033614] WARNING: module error: built-in module spkr can't find
> builtin dependency `audio'
> [ 1.7033614] WARNING: module error: built-in module spkr prerequisite
> audio failed, error 2
> [ 1.7133650] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class
> 9/0, rev 1.00/1.00, addr 1
> [ 1.7133650] uhub0: 2 ports with 2 removable, self powered
> [ 1.7133650] uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class
> 9/0, rev 1.00/1.00, addr 1
> [ 1.7133650] uhub1: 2 ports with 2 removable, self powered
> [ 1.7133650] uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class
> 9/0, rev 1.00/1.00, addr 1
> [ 1.7133650] uhub2: 2 ports with 2 removable, self powered
> [ 1.7133650] uhub3 at usb3: NetBSD (0000) UHCI root hub (0000), class
> 9/0, rev 1.00/1.00, addr 1
> [ 1.7133650] uhub3: 2 ports with 2 removable, self powered
> [ 1.7133650] uhub4 at usb4: NetBSD (0000) EHCI root hub (0000), class
> 9/0, rev 2.00/1.00, addr 1
> [ 1.7133650] uhub4: 8 ports with 8 removable, self powered
> [ 1.7933982] siisata0 port 0: device present, speed: 3.0Gb/s
> [ 1.7933982] siisata0 port 1: device present, speed: 3.0Gb/s
> [ 1.7933982] siisata0 port 2: device present, speed: 3.0Gb/s
> [ 1.7933982] siisata0 port 3: device present, speed: 3.0Gb/s
> [ 1.7933982] ahcisata0 port 0: device present, speed: 3.0Gb/s
> [ 1.7933982] ahcisata0 port 1: device present, speed: 3.0Gb/s
> [ 1.7933982] ahcisata0 port 2: device present, speed: 3.0Gb/s
> [ 1.7933982] ahcisata0 port 3: device present, speed: 3.0Gb/s
> [ 1.8034036] wd0 at atabus0 drive 0
> [ 1.8034036] wd0: <Hitachi HDS721010CLA332>
> [ 1.8034036] wd0: drive supports 16-sector PIO transfers, LBA48
> addressing
> [ 1.8034036] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect
> x 1953525168 sectors
> [ 3.0241948] ehci0: handing over full speed device on port 3 to uhci1
> [ 4.9892905] ugen0 at uhub1 port 1
> [ 4.9892905] ugen0: American Power Conversion (0x51d) Back-UPS XS
> 1500G FW:866.L8 .D USB FW:L8 (0x02), rev 2.00/0.90, addr 2
> [ 7.8264245] wd0: autoconfiguration error: IDENTIFY failed
> [ 7.8264245] autoconfiguration error: wd0: unable to open device,
> error = 5
> [ 10.8338789] wd0(siisata0:0:0): using PIO mode 0
> [ 10.8338789] wd1 at atabus1 drive 0
> [ 16.8588129] wd1: autoconfiguration error: IDENTIFY failed
> [ 16.8588129] wd1: fixing 0 sector size
> [ 16.8588129] wd1: secperunit and ncylinders are zero
> [ 19.8662676] wd1(siisata0:1:0): using PIO mode 0
> [ 19.8662676] wd2 at atabus2 drive 0
> [ 25.8912017] wd2: autoconfiguration error: IDENTIFY failed
> [ 25.8912017] wd2: fixing 0 sector size
> [ 25.8912017] wd2: secperunit and ncylinders are zero
> [ 28.8986561] wd2(siisata0:2:0): using PIO mode 0
> [ 28.8986561] wd3 at atabus3 drive 0
> [ 34.9235903] wd3: autoconfiguration error: IDENTIFY failed
> [ 34.9235903] wd3: fixing 0 sector size
> [ 34.9235903] wd3: secperunit and ncylinders are zero
> [ 37.9310448] wd3(siisata0:3:0): using PIO mode 0
> [ 37.9310448] wd4 at atabus4 drive 0
> [ 37.9310448] wd4: <Maxtor 31536H2>
> [ 37.9310448] wd4: drive supports 16-sector PIO transfers, LBA
> addressing
> [ 37.9310448] wd4: 14655 MB, 29777 cyl, 16 head, 63 sec, 512 bytes/sect
> x 30015216 sectors
> [ 38.0013108] wd4: 32-bit data port
> [ 38.0013108] wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
> mode 5 (Ultra/100)
> [ 38.0013108] wd4(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> (Ultra/100) (using DMA)
> [ 38.0013108] wd5 at atabus5 drive 0
> [ 38.0013108] wd5: <Hitachi HDS721010CLA332>
> [ 38.0013108] wd5: drive supports 16-sector PIO transfers, LBA48
> addressing
> [ 38.0013108] wd5: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect
> x 1953525168 sectors
> [ 38.0314975] wd5: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
> mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
> [ 38.0314975] wd5(ahcisata0:0:0): using PIO mode 4, DMA mode 2,
> Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
> [ 38.0314975] wd6 at atabus6 drive 0
> [ 38.0314975] wd6: <Hitachi HDS721010CLA332>
> [ 38.0314975] wd6: drive supports 16-sector PIO transfers, LBA48
> addressing
> [ 38.0314975] wd6: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect
> x 1953525168 sectors
> [ 38.0716990] wd6: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
> mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
> [ 38.0716990] wd6(ahcisata0:1:0): using PIO mode 4, DMA mode 2,
> Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
> [ 38.0716990] wd7 at atabus7 drive 0
> [ 38.0716990] wd7: <Hitachi HDS721010CLA332>
> [ 38.0716990] wd7: drive supports 16-sector PIO transfers, LBA48
> addressing
> [ 38.0716990] wd7: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect
> x 1953525168 sectors
> [ 38.1119007] wd7: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
> mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
> [ 38.1119007] wd7(ahcisata0:2:0): using PIO mode 4, DMA mode 2,
> Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
> [ 38.1119007] wd8 at atabus8 drive 0
> [ 38.1119007] wd8: <Hitachi HDS721010CLA332>
> [ 38.1119007] wd8: drive supports 16-sector PIO transfers, LBA48
> addressing
> [ 38.1119007] wd8: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect
> x 1953525168 sectors
> [ 38.1420774] wd8: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
> mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
> [ 38.1420774] wd8(ahcisata0:3:0): using PIO mode 4, DMA mode 2,
> Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
> [ 44.3777787] wd0: autoconfiguration error: IDENTIFY failed
> [ 44.3777787] opendisk: can't open dev wd0 (5)
> [ 50.4529393] wd0: autoconfiguration error: IDENTIFY failed
> [ 50.4529393] opendisk: can't open dev wd0 (5)
> [ 56.5682603] wd0: autoconfiguration error: IDENTIFY failed
> [ 56.5682603] raid0: RAID Level 5 rotated sparing
> [ 56.5682603] raid0: Components: component0[**FAILED**]
> component1[**FAILED**] component2[**FAILED**] component3[**FAILED**]
> /dev/wd5a /dev/wd6a /dev/wd7a /dev/wd8a
> [ 56.5682603] raid0: Total Sectors: 11721149952 (5723217 MB)
> [ 56.5682603] raid0: failed to create a dag. Too many component
> failures.
> [ 56.5682603] raid0d: error reading fsbn 0 (raid0 bn 0; cn 0 tn 0 sn 0)
> [ 56.5682603] raid0: dos partition I/O error
> [ 56.5682603] raid0: failed to create a dag. Too many component
> failures.
> [ 56.5682603] raid0d: error reading fsbn 0 of 0-31 (raid0 bn 0; cn 0 tn
> 0 sn 0)
> [ 56.5682603] raid0: failed to create a dag. Too many component
> failures.
> [ 56.5682603] raid0d: error reading fsbn 1 (raid0 bn 1; cn 0 tn 0 sn 1)
> [ 56.5682603] WARNING: 9 errors while detecting hardware; check system
> log.
> [ 56.5682603] boot device: wd4
> [ 56.5682603] root on wd4a dumps on wd4b
> [ 56.6688152] root file system type: ffs
> [ 56.6789022] kern.module.path=/stand/amd64/9.0/modules
> [ 73.7538756] wsdisplay0: screen 1 added (80x25, vt100 emulation)
> [ 73.7538756] wsdisplay0: screen 2 added (80x25, vt100 emulation)
> [ 73.7538756] wsdisplay0: screen 3 added (80x25, vt100 emulation)
> [ 73.7639110] wsdisplay0: screen 4 added (80x25, vt100 emulation)
> [ 120.9231258] raid0: failed to create a dag. Too many component
> failures.
> [ 120.9231258] raid0d: error reading fsbn 0 (raid0 bn 0; cn 0 tn 0 sn 0)
> [ 120.9231258] raid0: dos partition I/O error
>
Home |
Main Index |
Thread Index |
Old Index