NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: port-amd64/54217: Biostar X370GT5 may fail to boot with SATA controller enabled



Not sure if it will help but file location got lost during copy paste
from the shell in the first line of the trace messages (everything
else is the same):

panic: kernel diagnostic assertion "mutex_owned(&chp->ch_lock)"
failed: file "/usr/src/sys/dev/ata/ata_subr.c", line 275

On Sun, May 19, 2019 at 2:10 PM <vezhlys%gmail.com@localhost> wrote:
>
> >Number:         54217
> >Category:       port-amd64
> >Synopsis:       Biostar X370GT5 may fail to boot with SATA controller enabled
> >Confidential:   no
> >Severity:       serious
> >Priority:       low
> >Responsible:    port-amd64-maintainer
> >State:          open
> >Class:          sw-bug
> >Submitter-Id:   net
> >Arrival-Date:   Sun May 19 11:10:00 +0000 2019
> >Originator:     Andrius V
> >Release:        8.99.41
> >Organization:
> >Environment:
> >Description:
> Hi,
>
> I am facing a bit weird bug on the current brunch in a way that boot may fail with SATA controller enabled on Biostar X370GT5 motherboard (AMD X370 chipset, AMD Ryzen 5 1600 CPU). Once it fails, it will also fail all the consecutive times despite reboots or power offs. What is more interesting, any NetBSD current based setup will fail as well (let's say installation media). However, it doesn't happen all the time: seems like if I boot newly created installation image or newly built kernel (including based on current branch) or NetBSD 8 installation, it always succeeds. After that it makes impression of something being reset and any setup, including those failing before, will boot successfully for a while (usually from three to five boots), then it fails again and cycle repeats. NetBSD 8 branch doesn't seem to face this issue, just post BIOS process considerably slows down on A2 error code after reboot (power off helps in this case, but not reset).
>
> Trace messages I am getting on failure:
>
> KASSERT fails on mutex_owned(&chp->ch_lock)
>
> panic: kernel diagnostic assertion "mutex_owned(&chp->ch_lock)" failed:
> cpu4: Begin traceback...
> vpanic() at netbsd:vpanic+0x160
> stge_eeprom_wait.isra.4() at netbsd:stge_eeprom_wait.isra.4
> ahci_reset_drive() at netbsd:ahci_reset_drive+0x2b
> wd_get_params.constprop.5() at netbsd:wd_get_params.constprop.5+0x9a
> wdattach() at netbsd:wdattach+0x104
> config_attach_loc() at netbsd:config_attach_loc+0x1a5
> config_found_sm_loc() at netbsd:config_found_sm_loc+0x48
> atabusconfig_thread() at netbsd:atabusconfig_thread+0x2f1
> cpu4: End traceback...
> fatal breakpoint trap in supervisor mode
> trap type 1 code 0 rip 0xffffffff8021dded cs 0x8 rflags 0x202 cr2 0 ilevel 0 rsp 0xffffd3025ad21cb0
> curlwp 0xffffbfd0fdf629c0 pid 0.169 lowest kstack 0xffffd3025ad1e2c0
> Stopped in pid 0.169 (system) at        netbsd:breakpoint+0x5:  leave
>
> dmesg:
>
> total memory = 32719 MB
> avail memory = 31743 MB
> cpu_rng: RDSEED
> rnd: seeded with 128 bits
> timecounter: Timecounters tick every 10.000 msec
> Kernelized RAIDframe activated
> running cgd selftest aes-xts-256 aes-xts-512 done
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> BIOSTAR Group X370GT5 ( )
> mainbus0 (root)
> ACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA)
> ACPI: XSDT 0x00000000DC4AB0A8 0000CC (v01 ALASKA A M I    01072009 AMI  00010013)
> ACPI: FACP 0x00000000DC4B03E8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
> ACPI: DSDT 0x00000000DC4AB208 0051E0 (v02 ALASKA A M I    01072009 INTL 20120913)
> ACPI: FACS 0x00000000DC547E00 000040
> ACPI: APIC 0x00000000DC4B0500 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
> ACPI: FPDT 0x00000000DC4B05E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
> ACPI: FIDT 0x00000000DC4B0628 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
> ACPI: SSDT 0x00000000DC4B06C8 0000C8 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
> ACPI: SSDT 0x00000000DC4B0790 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
> ACPI: SSDT 0x00000000DC4B9428 002FB6 (v01 AMD    AMD AOD  00000001 INTL 20120913)
> ACPI: MCFG 0x00000000DC4BC3E0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
> ACPI: BHMB 0x00000000DC4BC420 000474 (v01 ALASKA A M I    00000001 AMI  00000001)
> ACPI: HPET 0x00000000DC4BC898 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
> ACPI: SSDT 0x00000000DC4BC8D0 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
> ACPI: UEFI 0x00000000DC4BC8F8 000042 (v01 ALASKA A M I    00000002      01000013)
> ACPI: TPM2 0x00000000DC4BC940 000038 (v04 ALASKA A M I    00000001 AMI  00000000)
> ACPI: IVRS 0x00000000DC4BC978 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
> ACPI: SSDT 0x00000000DC4BCA48 001A58 (v01 AMD    AMD CPU  00000001 AMD  00000001)
> ACPI: CRAT 0x00000000DC4BE4A0 000BD0 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
> ACPI: CDIT 0x00000000DC4BF070 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
> ACPI: SSDT 0x00000000DC4BF0A0 001CE5 (v01 AMD    AmdTable 00000001 INTL 20120913)
> ACPI: SSDT 0x00000000DC4C0D88 0000BF (v01 AMD    AMD PT   00001000 INTL 20120913)
> ACPI: WSMT 0x00000000DC4C0E48 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
> ACPI: SSDT 0x00000000DC4C0E70 0010AF (v01 AMD    AmdTable 00000001 INTL 20120913)
> ACPI: 9 ACPI AML tables successfully acquired and loaded
> ioapic0 at mainbus0 apid 13: pa 0xfec00000, version 0x21, 24 pins
> ioapic1 at mainbus0 apid 14: pa 0xfec01000, version 0x21, 32 pins
> cpu0 at mainbus0 apid 0
> cpu0: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu0: package 0, core 0, smt 0
> cpu1 at mainbus0 apid 2
> cpu1: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu1: package 0, core 1, smt 0
> cpu2 at mainbus0 apid 4
> cpu2: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu2: package 0, core 2, smt 0
> cpu3 at mainbus0 apid 8
> cpu3: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu3: package 0, core 4, smt 0
> cpu4 at mainbus0 apid 10
> cpu4: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu4: package 0, core 5, smt 0
> cpu5 at mainbus0 apid 12
> cpu5: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu5: package 0, core 6, smt 0
> cpu6 at mainbus0 apid 1
> cpu6: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu6: package 0, core 0, smt 1
> cpu7 at mainbus0 apid 3
> cpu7: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu7: package 0, core 1, smt 1
> cpu8 at mainbus0 apid 5
> cpu8: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu8: package 0, core 2, smt 1
> cpu9 at mainbus0 apid 9
> cpu9: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu9: package 0, core 4, smt 1
> cpu10 at mainbus0 apid 11
> cpu10: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu10: package 0, core 5, smt 1
> cpu11 at mainbus0 apid 13
> cpu11: AMD Ryzen 5 1600 Six-Core Processor            , id 0x800f11
> cpu11: package 0, core 6, smt 1
> acpi0 at mainbus0: Intel ACPICA 20190405
> acpi0: X/RSDT: OemId <ALASKA,  A M I ,01072009>, AslId <AMI ,00010013>
> acpi0: autoconfiguration error: invalid PCI address for D01E
> acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
> acpi0: SCI interrupting at int 9
> acpi0: fixed power button present
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> AMDN (PNP0C01) at acpi0 not configured
> IOMA (PNP0C02) at acpi0 not configured
> APSP (PNP0C02) at acpi0 not configured
> attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
> spkr0 at pcppi1: PC Speaker
> wsbell at spkr0 not configured
> midi0 at pcppi1: PC speaker
> sysbeep0 at pcppi1
> SIO1 (PNP0C02) at acpi0 not configured
> pckbc1 at acpi0 (PS2K, PNP0303-0) (kbd port): io 0x60,0x64 irq 1
> UAR1 (PNP0501) at acpi0 not configured
> S900 (PNP0C02) at acpi0 not configured
> acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
> GPIO (AMDI0030) at acpi0 not configured
> TPM (MSFT0101) at acpi0 not configured
> AWR0 (PNP0C02) at acpi0 not configured
> ABR0 (PNP0C02) at acpi0 not configured
> ABR1 (PNP0C02) at acpi0 not configured
> ABR2 (PNP0C02) at acpi0 not configured
> ABR3 (PNP0C02) at acpi0 not configured
> ABR4 (PNP0C02) at acpi0 not configured
> ABR5 (PNP0C02) at acpi0 not configured
> ABR6 (PNP0C02) at acpi0 not configured
> ABR7 (PNP0C02) at acpi0 not configured
> AWR1 (PNP0C02) at acpi0 not configured
> ABR8 (PNP0C02) at acpi0 not configured
> ABR9 (PNP0C02) at acpi0 not configured
> ABRA (PNP0C02) at acpi0 not configured
> ABRB (PNP0C02) at acpi0 not configured
> ABRC (PNP0C02) at acpi0 not configured
> ABRD (PNP0C02) at acpi0 not configured
> ABRE (PNP0C02) at acpi0 not configured
> ABRF (PNP0C02) at acpi0 not configured
> PTIO (AMDIF030) at acpi0 not configured
> acpitz0 at acpi0 (THRM)
> acpitz0: levels: critical 85.0 C, passive cooling
> acpiwmi0 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface
> acpiwmibus at acpiwmi0 not configured
> ACPI: Enabled 1 GPEs in block 00 to 1F
> attimer1: attached to pcppi1
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> amdsmn0 at pci0 dev 0 function 0: AMD Family 17h System Management Network
> amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h)
> vendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 not configured
> pchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb0 at pci0 dev 1 function 1: vendor 1022 product 1453 (rev. 0x00)
> ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> xhci0 at pci1 dev 0 function 0: vendor 1022 product 43b9 (rev. 0x02)
> xhci0: interrupting at msi0 vec 0
> xhci0: xHCI version 1.10
> usb0 at xhci0: USB revision 3.1
> usb1 at xhci0: USB revision 2.0
> ahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b5 (rev. 0x02)
> ahcisata0: 64-bit DMA
> ahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP 0xef36ff27<SXS,PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
> ahcisata0: interrupting at msi1 vec 0
> atabus0 at ahcisata0 channel 0
> atabus1 at ahcisata0 channel 1
> atabus2 at ahcisata0 channel 2
> atabus3 at ahcisata0 channel 3
> atabus4 at ahcisata0 channel 4
> atabus5 at ahcisata0 channel 5
> atabus6 at ahcisata0 channel 6
> atabus7 at ahcisata0 channel 7
> ppb1 at pci1 dev 0 function 2: vendor 1022 product 43b0 (rev. 0x02)
> ppb1: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb2 at pci2 dev 0 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb2: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
> ppb2: link is x1 @ 2.5GT/s
> pci3 at ppb2 bus 3
> pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x16)
> re0: interrupting at msix2 vec 0
> re0: Ethernet address
> re0: using 256 tx descriptors
> rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
> rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
> ppb3 at pci2 dev 1 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb3: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
> ppb3: link is x1 @ 2.5GT/s
> pci4 at ppb3 bus 4
> pci4: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb4 at pci4 dev 0 function 0: vendor 1b21 product 1080 (rev. 0x03)
> pci5 at ppb4 bus 5
> pci5: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb5 at pci2 dev 2 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
> pci6 at ppb5 bus 6
> pci6: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb6 at pci2 dev 3 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb6: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
> pci7 at ppb6 bus 7
> pci7: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb7 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb7: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x2 @ 5.0GT/s
> pci8 at ppb7 bus 8
> pci8: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 1fc9 product 4022 (ethernet network) at pci8 dev 0 function 0 not configured
> ppb8 at pci2 dev 6 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb8: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
> pci9 at ppb8 bus 9
> pci9: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb9 at pci2 dev 7 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb9: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
> ppb9: link is x1 @ 2.5GT/s
> pci10 at ppb9 bus 10
> pci10: i/o space, memory space enabled, rd/line, wr/inv ok
> athn0 at pci10 dev 0 function 0: Atheros AR9287
> athn0: rev 2 (2T2R), ROM rev 4, address c0:4a:00:51:97:9a
> athn0: interrupting at ioapic1 pin 3
> athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> pchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00)
> pchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb10 at pci0 dev 3 function 1: vendor 1022 product 1453 (rev. 0x00)
> ppb10: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
> ppb10: link is x8 @ 8.0GT/s
> pci11 at ppb10 bus 11
> pci11: i/o space, memory space enabled, rd/line, wr/inv ok
> vga0 at pci11 dev 0 function 0: vendor 1002 product 67ef (rev. 0xcf)
> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> drm at vga0 not configured
> hdaudio0 at pci11 dev 0 function 1: HD Audio Controller
> hdaudio0: interrupting at msi3 vec 0
> hdafg0 at hdaudio0: vendor 1002 product aa01
> hdafg0: HDMI00 2ch: Digital Out [Jack]
> hdafg0: HDMI01 2ch: Digital Out [Jack]
> hdafg0: HDMI02 2ch: Digital Out [Jack]
> hdafg0: HDMI03 2ch: Digital Out [Jack]
> hdafg0: HDMI04 2ch: Digital Out [Jack]
> hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
> pchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00)
> pchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb11 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00)
> ppb11: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
> pci12 at ppb11 bus 12
> pci12: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 1022 product 145a (non-essential instrumentation, subclass 0x00) at pci12 dev 0 function 0 not configured
> vendor 1022 product 1456 (miscellaneous crypto) at pci12 dev 0 function 2 not configured
> xhci1 at pci12 dev 0 function 3: vendor 1022 product 145c (rev. 0x00)
> xhci1: interrupting at msi4 vec 0
> xhci1: xHCI version 1.0
> usb2 at xhci1: USB revision 3.0
> usb3 at xhci1: USB revision 2.0
> pchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb12 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00)
> ppb12: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
> pci13 at ppb12 bus 13
> pci13: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 1022 product 1455 (non-essential instrumentation, subclass 0x00) at pci13 dev 0 function 0 not configured
> ahcisata1 at pci13 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51)
> ahcisata1: 64-bit DMA
> ahcisata1: AHCI revision 1.31, 1 port, 32 slots, CAP 0xf737ff00<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
> ahcisata1: interrupting at msi5 vec 0
> atabus8 at ahcisata1 channel 0
> hdaudio1 at pci13 dev 0 function 3: HD Audio Controller
> hdaudio1: interrupting at msi6 vec 0
> hdafg1 at hdaudio1: vendor 10ec product 0892
> hdafg1: DAC00 8ch: Speaker [Jack]
> hdafg1: DAC01 2ch: HP Out [Jack]
> hdafg1: DIG02 2ch: SPDIF Out [Jack]
> hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
> hdafg1: ADC04 2ch: Mic In [Jack]
> hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
> audio0 at hdafg1: full duplex, playback, capture, mmap, independent
> audio0: slinear_le:16 8ch 48000Hz, blk 40ms for playback
> audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording
> spkr1 at audio0: PC Speaker (synthesized)
> wsbell at spkr1 not configured
> vendor 1022 product 790b (SMBus serial bus, revision 0x59) at pci0 dev 20 function 0 not configured
> pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x51)
> pchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. 0x00)
> pchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. 0x00)
> pchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. 0x00)
> pchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. 0x00)
> pchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. 0x00)
> pchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. 0x00)
> pchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. 0x00)
> pchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. 0x00)
> isa0 at pcib0
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> acpicpu0 at cpu0: ACPI CPU
> acpicpu0: C1: FFH, lat   1 us, pow     0 mW
> acpicpu0: C2: I/O, lat 400 us, pow     0 mW
> acpicpu0: P0: FFH, lat   1 us, pow  3960 mW, 3200 MHz
> acpicpu0: P1: FFH, lat   1 us, pow  2940 mW, 2800 MHz
> acpicpu0: P2: FFH, lat   1 us, pow  1350 mW, 1550 MHz
> acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
> acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
> acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
> acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
> acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
> acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
> acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
> acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
> acpicpu1 at cpu1: ACPI CPU
> acpicpu2 at cpu2: ACPI CPU
> acpicpu3 at cpu3: ACPI CPU
> acpicpu4 at cpu4: ACPI CPU
> acpicpu5 at cpu5: ACPI CPU
> acpicpu6 at cpu6: ACPI CPU
> acpicpu7 at cpu7: ACPI CPU
> acpicpu8 at cpu8: ACPI CPU
> acpicpu9 at cpu9: ACPI CPU
> acpicpu10 at cpu10: ACPI CPU
> acpicpu11 at cpu11: ACPI CPU
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> autoconfiguration error: ERROR: 4400 cycle TSC drift observed
> uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
> uhub0: 6 ports with 6 removable, self powered
> uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
> uhub1: 14 ports with 14 removable, self powered
> uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
> uhub2: 4 ports with 4 removable, self powered
> uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
> uhub3: 4 ports with 4 removable, self powered
> IPsec: Initialized Security Association Processing.
> ahcisata0 port 1: device present, speed: 6.0Gb/s
> ahcisata0 port 5: device present, speed: 3.0Gb/s
> wd0 at atabus1 drive 0
> wd0: <KINGSTON SKC400S37512G>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 476 GB, 992277 cyl, 16 head, 63 sec, 512 bytes/sect x 1000215216 sectors
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
> wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
> umass0 at uhub0 port 1 configuration 1 interface 0
> umass0: StoreJet Transcend (0x174c) StoreJet Transcend (0x5106), rev 3.00/80.00, addr 1
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, 1 lun per target
> sd0 at scsibus0 target 0 lun 0: <StoreJet, Transcend, 0> disk fixed
> wd1 at atabus5 drive 0
> wd1: <SAMSUNG HD161HJ>
> wd1: drive supports 16-sector PIO transfers, LBA48 addressing
> wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
> sd0: 238 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
> uhub4 at uhub1 port 12: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9/0, rev 2.00/32.98, addr 2
> uhub4: single transaction translator
> sd0: GPT GUID: aa426d16-0d0e-40a1-90e7-9a75f7b5c75f
> dk0 at sd0: "67b20926-002a-424f-a169-2c7efc563bb9", 614401 blocks at 4097, type: msdos
> dk1 at sd0: "5d7e40e5-4454-4a98-a81e-c5223d78f161", 421527550 blocks at 618498, type: ext2fs
> dk2 at sd0: "ed7d719c-6ef4-451f-9732-2e4dd981273b", 35925033 blocks at 464178417, type: <unknown>
> dk3 at sd0: "731c9349-02e0-471d-93db-99f63c06afe8", 42032369 blocks at 422146048, type: ffs
> uhub4: 4 ports with 4 removable, self powered
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7, NCQ (32 tags)
> wd1(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
> ubt0 at uhub3 port 2
> ubt0: vendor 0a12 (0xa12) Bluetooth2.1+EDR CLASS1 (0x01), rev 2.00/52.76, addr 1
> umass1 at uhub0 port 2 configuration 1 interface 0
> umass1: Western Digital (0x1058) Elements 10A8 (0x10a8), rev 3.00/10.42, addr 3
> umass1: using SCSI over Bulk-Only
> scsibus1 at umass1: 2 targets, 1 lun per target
> sd1 at scsibus1 target 0 lun 0: <WD, Elements 10A8, 1042> disk fixed
> sd1: fabricating a geometry
> sd1: 931 GB, 953837 cyl, 64 head, 32 sec, 512 bytes/sect x 1953458176 sectors
> sd1: fabricating a geometry
> uhidev0 at uhub4 port 1 configuration 1 interface 0
> uhidev0: Kensington (0x47d) Kensington USB/PS2 Orbit (0x1022), rev 1.10/4.00, addr 4, iclass 3/1
> ums0 at uhidev0: 2 buttons
> wsmouse0 at ums0 mux 0
> uhub5 at uhub3 port 3: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9/0, rev 2.00/9.01, addr 2
> uhub5: single transaction translator
> uhub5: 4 ports with 4 removable, self powered
> uhidev1 at uhub4 port 2 configuration 1 interface 0
> uhidev1: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2030), rev 2.00/1.09, addr 5, iclass 3/1
> ukbd0 at uhidev1: 8 Variable keys, 6 Array codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev2 at uhub4 port 2 configuration 1 interface 1
> uhidev2: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2030), rev 2.00/1.09, addr 5, iclass 3/0
> uhid0 at uhidev2: input=4, output=0, feature=0
> uhidev3 at uhub4 port 2 configuration 1 interface 2
> uhidev3: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2030), rev 2.00/1.09, addr 5, iclass 3/0
> ukbd1 at uhidev3: 120 Variable keys, 0 Array codes
> wskbd1 at ukbd1 mux 1
> wskbd1: connecting to wsdisplay0
> >How-To-Repeat:
>
> >Fix:
> Workaround: boot NetBSD 8 based system and reboot to current.
>


Home | Main Index | Thread Index | Old Index