kern/53991: X does not work on amd64/7.2 after pgoyette-compat

To: kern-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: kern/53991: X does not work on amd64/7.2 after pgoyette-compat
From: isaki%pastel-flower.jp@localhost
Date: Mon, 18 Feb 2019 14:20:00 +0000 (UTC)
>Number:         53991
>Category:       kern
>Synopsis:       X does not work on amd64/7.2 after pgoyette-compat
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Feb 18 14:20:00 +0000 2019
>Originator:     Tetsuya Isaki
>Release:        NetBSD-current+7.2
>Organization:
>Environment:
NetBSD XXXXXXX 7.2 NetBSD 7.2 (GENERIC) #19: Fri Jan 25 17:38:24 JST 2019  isaki@XXXXXXX:XXX/sys/arch/amd64/compile/GENERIC amd64
>Description:
X does not work on my amd64 after merging pgoyette-compat.
I placed current kernel in NetBSD 7.2 userland.
A combination of 7.2 userland + current kernel was working
until pgoyette-compat merged.

% startx
 -> X and window manager starts.
 -> Immediately then X backs to console.  It says... (hand copy)
----------
X.Org X Server 1.10.6
Release Date: 2011-07-08
X Protocol Version 11, Revision 0
build Operating System: NetBSD xxx 8.99.34 NetBSD 8.99.34 (GENERIC) #...
Build Date: 01 August 2011  01:01:00AM
 (snip)
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 17 15:35:55 2019
(==) Using config file: "/etc/X11/xorg.conf"
----------

I cannot enter any key.  ping has no response.
Here is a dmesg (outputted by kernel before pgoyette-compat) and
xorg.conf:

----------
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.99.31 (GENERIC) #7: Sun Feb 17 14:39:08 JST 2019
	isaki@XXX:XXX/sys/arch/amd64/compile/GENERIC
total memory = 4086 MB
avail memory = 3941 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0x00000000000FB7F0 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000DF690000 00003C (v01 A_M_I_ OEMRSDT  04001028 MSFT 00000097)
ACPI: FACP 0x00000000DF690200 000084 (v02 A_M_I_ OEMFACP  04001028 MSFT 00000097)
ACPI: DSDT 0x00000000DF6905C0 008A54 (v01 A1350  A1350000 00000000 INTL 20060113)
ACPI: FACS 0x00000000DF69E000 000040
ACPI: APIC 0x00000000DF690390 00006C (v01 A_M_I_ OEMAPIC  04001028 MSFT 00000097)
ACPI: MCFG 0x00000000DF690400 00003C (v01 A_M_I_ OEMMCFG  04001028 MSFT 00000097)
ACPI: OEMB 0x00000000DF69E040 000080 (v01 A_M_I_ AMI_OEM  04001028 MSFT 00000097)
ACPI: HPET 0x00000000DF699020 000038 (v01 A_M_I_ OEMHPET  04001028 MSFT 00000097)
ACPI: GSCI 0x00000000DF69E0C0 002024 (v01 A_M_I_ GMCHSCI  04001028 MSFT 00000097)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Pentium(R) Dual-Core  CPU      E6300  @ 2.80GHz, id 0x1067a
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Pentium(R) Dual-Core  CPU      E6300  @ 2.80GHz, id 0x1067a
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20181213
acpi0: X/RSDT: OemId <A_M_I_,OEMRSDT ,04001028>, AslId <MSFT,00000097>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF874EE387AC90 000214 (v01 AMI    CPU1PM   00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF874EE3887D90 000143 (v01 AMI    CPU2PM   00000001 INTL 20060113)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
LPTE (PNP0401) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
FWH (INT0800) at acpi0 not configured
FWHE (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
UAR1 (PNP0501) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI: Enabled 3 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 29c0 (rev. 0x10)
agp0 at pchb0: G33-family chipset
agp0: detected 7164k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 29c2 (rev. 0x10)
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 1106 product 0397
hdafg0: DAC00 2ch: Speaker [Jack], HP Out [Jack]
hdafg0: ADC01 2ch: CD [Built-In], Line In [Jack], Mic In [Jack]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: 2ch/2ch 48000Hz PCM16*
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x01)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 27d2 (rev. 0x01)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 1
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ale0 at pci2 dev 0 function 0: Attansic/Atheros L1E Ethernet
ale0: AR8121 (L1E), ioapic0 pin 17
ale0: Ethernet address XX:XX:XX:XX:XX:XX
atphy0 at ale0 phy 0: L1 10/100/1000 PHY, rev. 9
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0xe1)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
bktr0 at pci3 dev 1 function 0
bktr0: interrupting at ioapic0 pin 20
bktr0: Warning - card vendor 0x10fc (model 0x4030) unknown.
bktr0: Pinnacle/Miro TV, <no> tuner.
vendor 109e product 0878 (miscellaneous multimedia, revision 0x11) at pci3 dev 1 function 1 not configured
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 23 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat  10 us, pow 88000 mW, 2793 MHz
acpicpu0: P1: FFH, lat  10 us, pow 42240 mW, 2128 MHz
acpicpu0: P2: FFH, lat  10 us, pow 34584 mW, 1596 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb4: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
uhub4 at usb3: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
wd0 at atabus2 drive 0
wd0: <ST3160811AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.31/modules
kern info: [drm] Memory usable by graphics device = 1024M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
kern info: [drm] initialized overlay support
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffff8a006a7a4000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
----------

/etc/X11/xorg.conf
----------
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/X11R7/lib/modules"
	FontPath     "/usr/X11R7/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R7/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R7/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R7/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R7/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/local/"
	FontPath     "/usr/pkg/share/fonts/X11/TTF/"
	FontPath     "/usr/pkg/share/fonts/X11/local/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "dri2"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "shadow"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option      "XkbModel"   "jp106"
	Option      "XkbLayout"  "jp"
	Option      "XkbOptions" "ctrl:swapcaps"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "wsmouse"
	Option	    "Device" "/dev/wsmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "wsfb"
	BusID       "PCI:0:2:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
----------
>How-To-Repeat:
Install 7.2/amd64.
Boot with -current kernel.
Run "startx".
>Fix:
unknown.
Prev by Date: Re: port-amd64/53990: NetBSD 8.0 AMD64 panic ffs_newvnode
Next by Date: Re: port-amd64/53990: NetBSD 8.0 AMD64 panic ffs_newvnode
Previous by Thread: port-amd64/53990: NetBSD 8.0 AMD64 panic ffs_newvnode
Next by Thread: Re: kern/53991: X does not work on amd64/7.2 after pgoyette-compat
Indexes:
Home | Main Index | Thread Index | Old Index