Re: bin/53956: raidframe fails to create raid set

[Greg Oster <oster%netbsd.org@localhost>]

On Thu,  7 Feb 2019 13:40:00 +0000 (UTC)
he%NetBSD.org@localhost wrote:

> >Number:         53956
> >Category:       bin
> >Synopsis:       raidframe fails to create raid set
> >Confidential:   no
> >Severity:       serious
> >Priority:       medium
> >Responsible:    bin-bug-people
> >State:          open
> >Class:          sw-bug
> >Submitter-Id:   net
> >Arrival-Date:   Thu Feb 07 13:40:00 +0000 2019
> >Originator:     he%NetBSD.org@localhost
> >Release:        NetBSD 8.0
> >Organization:  
> 	I try...
> >Environment:  
> System: NetBSD  8.0 NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC
> 2018
> mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
> amd64 Architecture: x86_64 Machine: amd64
> >Description:  
> 	I'm trying to configure raidframe on a "new" system, having
> 	booted from the USB image.  I've labeled the disks using
> 	disklabel:
> 
> # disklabel wd0
> # /dev/rwd0:
> type: ESDI
> disk: MB2000EBZQC     
> label: fictitious
> flags:
> bytes/sector: 512
> sectors/track: 63
> tracks/cylinder: 16
> sectors/cylinder: 1008
> cylinders: 3876021
> total sectors: 3907029168
> rpm: 3600
> interleave: 1
> trackskew: 0
> cylinderskew: 0
> headswitch: 0           # microseconds
> track-to-track seek: 0  # microseconds
> drivedata: 0 
> 
> 8 partitions:
> #        size    offset     fstype [fsize bsize cpg/sgs]
>  a:   2098176         0     4.2BSD   1024  8192  2000  # (Cyl.      0
> -   2081*) d: 3907029168         0     unused      0     0        #
> (Cyl.      0 - 3876020) e: 3904930992   2098176
> RAID                     # (Cyl.   2081*- 3876020) # disklabel wd1
> # /dev/rwd1:
> type: ESDI
> disk: MB2000EBZQC     
> label: fictitious
> flags:
> bytes/sector: 512
> sectors/track: 63
> tracks/cylinder: 16
> sectors/cylinder: 1008
> cylinders: 3876021
> total sectors: 3907029168
> rpm: 3600
> interleave: 1
> trackskew: 0
> cylinderskew: 0
> headswitch: 0           # microseconds
> track-to-track seek: 0  # microseconds
> drivedata: 0 
> 
> 8 partitions:
> #        size    offset     fstype [fsize bsize cpg/sgs]
>  a:   2098176         0     4.2BSD   1024  8192  2000  # (Cyl.      0
> -   2081*) d: 3907029168         0     unused      0     0        #
> (Cyl.      0 - 3876020) e: 3904930992   2098176
> RAID                     # (Cyl.   2081*- 3876020)
> 
> 	and I've prepared a raid config file:
> 
> # ed /tmp/raid0.conf
> /tmp/raid0.conf: No such file or directory
> a
> START array
> 1 2 0
> 
> START disks
> /dev/wd0e
> /dev/wd1e
> 
> START layout
> 32 1 1 0
> 
> START queue
> fifo 100
> .
> w
> 96
> q
> #
> 
> 	However, when using this with raidctl, it fails, and attempts
> 	at initializing the raid also fails:
> 
> # raidctl -C /tmp/raid0.conf raid0
> Hosed component: /dev/wd1e
> Hosed component: /dev/wd0e
> raid0: Ignoring /dev/wd0e
[snip]
> raid0: Components: /dev/wd0e[**FAILED**] /dev/wd1e[**FAILED**]

Somehow cftPtr->force is not set to 1 as it should be in this case.

Later...

Greg Oster