Re: kern/53301 (msk0 device reports no link, when there is link on same laptop with Windows and Linux.)

[David Holland <dholland-bugs%netbsd.org@localhost>]

The following reply was made to PR kern/53301; it has been noted by GNATS.

From: David Holland <dholland-bugs%netbsd.org@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: kern/53301 (msk0 device reports no link, when there is link on
 same laptop with Windows and Linux.)
Date: Mon, 21 Jan 2019 19:57:38 +0000

 These two mails were never field in gnats.
 (gnats traffic should go to gnats-bugs@; sometimes this needs to be
 set by hand when replying to your own postings)
 
    ------
 
 From: Chris Humphries <chris%sogubsys.com@localhost>
 To: jdolecek%NetBSD.org@localhost, gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost
 Subject: Re: kern/53301 (msk0 device reports no link, when there is link on
 	same laptop with Windows and Linux.)
 Date: Wed, 6 Jun 2018 07:57:30 -0400
 
 Tried out the new changes you made to msk stuff today, just-in-case
 there was a change, even though you didn't advise me to try. Same
 results, though. 
 
 
 NetBSD neo.sogubsys.com 8.99.19 NetBSD 8.99.19 (GENERIC) #1: Tue Jun 12 19:58:27 EDT 2018  root%neo.sogubsys.com@localhost:/usr/obj/sys/arch/amd64/compile/GENERIC amd64
 
 [    1.049321] mskc0 at pci3 dev 0 function 0, Yukon-2 FE+ rev. A0 (0x0): ioapic0 pin 19
 [    1.049321] msk0 at mskc0 port A: Ethernet address 00:24:54:b4:47:c3
 [    1.049321] ukphy0 at msk0 phy 0: OUI 0x000ac2, model 0x0026, rev. 0
 [    7.603052] mskc0: interrupt moderation is 1000 us
 
    ------
 
 From: Hauke Fath <hf%spg.tu-darmstadt.de@localhost>
 To: netbsd-bugs%NetBSD.org@localhost
 Cc: jdolecek%NetBSD.org@localhost, gnats-admin%NetBSD.org@localhost, chris%sogubsys.com@localhost
 Subject: Re: kern/53301 (msk0 device reports no link, when there is link on
 	same laptop with Windows and Linux.)
 Date: Fri, 15 Jun 2018 12:02:51 +0200
 
 On 06/15/18 03:55, Chris Humphries wrote:
 >   It is attaching the wrong device?
 >
 >   pcictl pci0 list|grep Marvell
 >   -----------------------------
 >   006:00:0: Marvell Yukon 88E8040 (ethernet network)
 
 [...]
 
 >   dmesg|grep msk
 >   --------------
 >   [    1.040190] mskc0 at pci3 dev 0 function 0, Yukon-2 FE+ rev. A0 (0x0):
 ioapic0 pin 19
 >   [    1.040190] msk0 at mskc0 port A: Ethernet address 00:24:54:b4:47:c3
 >   [    1.040190] makphy0 at msk0 phy 0: Marvell 88E3016 10/100 Fast Ethernet
 PHY, rev. 0
 
 This would be the phy, not the ethernet controller, I guess.
 
 Cheerio,
 hauke
 
 >   [    7.355489] mskc0: interrupt moderation is 1000 us