NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kern/53307 (ahcisata(4): Failed to attach mSATA SSD (WDCTL_RST failed))
still fails.
[ 1.046947] ahcisata0 at pci0 dev 17 function 0: vendor 1022
product 7801 (rev. 0x40)
[ 1.046947] ahcisata0: 64-bit DMA
[ 1.046947] ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP
0xf732ff21<SXS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
[ 1.046947] ahcisata0: interrupting at msi6 vec 0
[ 1.046947] atabus0 at ahcisata0 channel 0
[ 1.046947] atabus1 at ahcisata0 channel 1
[ 2.260921] ahcisata0 port 1: device present, speed: 6.0Gb/s
[ 3.091379] autoconfiguration error: ahcisata0 port 1: clearing
WDCTL_RST failed for drive 15
[ 3.591655] autoconfiguration error: ahcisata0 port 1: drive 15
reset failed, disabling PMP
[ 3.691710] ahcisata0 port 1: device present, speed: 6.0Gb/s
[ 4.522168] autoconfiguration error: ahcisata0 port 1: clearing
WDCTL_RST failed for drive 0
Full dmesg:
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001,
2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
2015, 2016, 2017,
[ 1.000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 8.99.30 (GENERIC) #0: Sun Jan 13 19:21:27 UTC 2019
[ 1.000000]
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 7864 MB
[ 1.000000] avail memory = 7611 MB
[ 1.000000] cpu_rng: RDRAND
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.000003] CompuLab fitlet (1.0)
[ 1.000003] mainbus0 (root)
[ 1.000003] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 1.000003] ACPI: XSDT 0x00000000AD266098 0000AC (v01 ALASKA A M I
01072009 AMI 00010013)
[ 1.000003] ACPI: FACP 0x00000000AD26BB00 00010C (v05 ALASKA A M I
01072009 AMI 00010013)
[ 1.000003] Firmware Warning (ACPI): Optional FADT field
Pm2ControlBlock has valid Length but zero Address:
0x0000000000000000/0x1 (20181213/tbfadt-693)
[ 1.000003] ACPI: DSDT 0x00000000AD2661D8 005923 (v02 ALASKA A M I
00000000 INTL 20051117)
[ 1.000003] ACPI: FACS 0x00000000AD28BE80 000040
[ 1.000003] ACPI: APIC 0x00000000AD26BC10 00007E (v03 ALASKA A M I
01072009 AMI 00010013)
[ 1.000003] ACPI: FPDT 0x00000000AD26BC90 000044 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 1.000003] ACPI: FIDT 0x00000000AD26BCD8 00009C (v01 ALASKA A M I
01072009 AMI 00010013)
[ 1.000003] ACPI: MCFG 0x00000000AD26BD78 00003C (v01 ALASKA A M I
01072009 MSFT 00010013)
[ 1.000003] ACPI: ASF! 0x00000000AD26BDB8 0000D6 (v32 AMD
SB700ASF 00000001 TFSM 000F4240)
[ 1.000003] ACPI: HPET 0x00000000AD26BE90 000038 (v01 ALASKA A M I
01072009 AMI 00000005)
[ 1.000003] ACPI: WDRT 0x00000000AD26BEC8 000047 (v01 ALASKA A M I
01072009 AMI 00000005)
[ 1.000003] ACPI: IVRS 0x00000000AD26BF10 000078 (v02 AMD AGESA
00000001 AMD 00000000)
[ 1.000003] ACPI: SSDT 0x00000000AD26BF88 000624 (v01 AMD AGESA
00000001 AMD 00000001)
[ 1.000003] ACPI: SSDT 0x00000000AD26C5B0 00489D (v02 AMD AGESA
00000002 MSFT 04000000)
[ 1.000003] ACPI: SSDT 0x00000000AD270E50 0006CA (v01 AMD
CPMADPS4 00000001 INTL 20051117)
[ 1.000003] ACPI: SSDT 0x00000000AD271520 000474 (v01 AMD
CPMXPRES 00000001 INTL 20051117)
[ 1.000003] ACPI: SSDT 0x00000000AD271998 001207 (v01 AMD
CPMCMN 00000001 INTL 20051117)
[ 1.000003] ACPI: SSDT 0x00000000AD272BA0 001457 (v01 AMD
CPMDFIGP 00000001 INTL 20051117)
[ 1.000003] ACPI: SSDT 0x00000000AD273FF8 00008F (v01 AMD
CPMDFMOT 00000001 INTL 20051117)
[ 1.000003] ACPI: SSDT 0x00000000AD274088 001087 (v01 AMD
CPMZPODD 00000001 INTL 20051117)
[ 1.000003] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 1.000003] ioapic0 at mainbus0 apid 5: pa 0xfec00000, version 0x21, 24 pins
[ 1.000003] ioapic1 at mainbus0 apid 6: pa 0xfec01000, version 0x21, 32 pins
[ 1.000003] cpu0 at mainbus0 apid 0
[ 1.000003] cpu0: AMD A4 Micro-6400T APU + AMD Radeon R3 Graphics,
id 0x730f01
[ 1.000003] cpu0: package 0, core 0, smt 0
[ 1.000003] cpu1 at mainbus0 apid 1
[ 1.000003] cpu1: AMD A4 Micro-6400T APU + AMD Radeon R3 Graphics,
id 0x730f01
[ 1.000003] cpu1: package 0, core 1, smt 0
[ 1.000003] cpu2 at mainbus0 apid 2
[ 1.000003] cpu2: AMD A4 Micro-6400T APU + AMD Radeon R3 Graphics,
id 0x730f01
[ 1.000003] cpu2: package 0, core 2, smt 0
[ 1.000003] cpu3 at mainbus0 apid 3
[ 1.000003] cpu3: AMD A4 Micro-6400T APU + AMD Radeon R3 Graphics,
id 0x730f01
[ 1.000003] cpu3: package 0, core 3, smt 0
[ 1.000003] acpi0 at mainbus0: Intel ACPICA 20181213
[ 1.000003] acpi0: X/RSDT: OemId <ALASKA, A M I,01072009>, AslId
<AMI ,00010013>
[ 1.000003] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
[ 1.000003] acpi0: SCI interrupting at int 9
[ 1.000003] acpi0: fixed power button present
[ 1.000003] timecounter: Timecounter "ACPI-Safe" frequency 3579545
Hz quality 900
[ 1.046542] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[ 1.046542] timecounter: Timecounter "hpet0" frequency 14318180 Hz
quality 2000
[ 1.046947] AMDN (PNP0C01) at acpi0 not configured
[ 1.046947] BROD (PNP0C02) at acpi0 not configured
[ 1.046947] UMEM (PNP0C02) at acpi0 not configured
[ 1.046947] acpivga0 at acpi0 (VGA): ACPI Display Adapter
[ 1.046947] acpivga0: connected output devices:
[ 1.046947] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
[ 1.046947] acpivga0: 0x0110: LCD Panel, head 0, bios detect
[ 1.046947] acpivga0: 0x0200: TV, head 0
[ 1.046947] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
[ 1.046947] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
[ 1.046947] SIO1 (PNP0C02) at acpi0 not configured
[ 1.046947] UAR1 (PNP0501) at acpi0 not configured
[ 1.046947] UAR2 (PNP0501) at acpi0 not configured
[ 1.046947] NBRM (PNP0C02) at acpi0 not configured
[ 1.046947] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
[ 1.046947] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.046947] spkr0 at pcppi1: PC Speaker
[ 1.046947] wsbell at spkr0 not configured
[ 1.046947] midi0 at pcppi1: PC speaker
[ 1.046947] sysbeep0 at pcppi1
[ 1.046947] RMSC (PNP0C02) at acpi0 not configured
[ 1.046947] S900 (PNP0C02) at acpi0 not configured
[ 1.046947] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
[ 1.046947] RMEM (PNP0C01) at acpi0 not configured
[ 1.046947] AWR0 (PNP0C02) at acpi0 not configured
[ 1.046947] ABR0 (PNP0C02) at acpi0 not configured
[ 1.046947] ABR1 (PNP0C02) at acpi0 not configured
[ 1.046947] ABR2 (PNP0C02) at acpi0 not configured
[ 1.046947] ABR3 (PNP0C02) at acpi0 not configured
[ 1.046947] ABR4 (PNP0C02) at acpi0 not configured
[ 1.046947] OMSC (PNP0C02) at acpi0 not configured
[ 1.046947] AS34 (ASD0001) at acpi0 not configured
[ 1.046947] acpiwdrt0 at acpi0: mem 0xfeb00000,0xfeb00004
[ 1.046947] acpiwdrt0: watchdog interval 1-1023 sec.
[ 1.046947] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 1.046947] attimer1: attached to pcppi1
[ 1.046947] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.046947] pci0: i/o space, memory space enabled, rd/line,
rd/mult, wr/inv ok
[ 1.046947] pchb0 at pci0 dev 0 function 0: vendor 1022 product
1566 (rev. 0x00)
[ 1.046947] vendor 1022 product 1567 (IOMMU system) at pci0 dev 0
function 2 not configured
[ 1.046947] radeon0 at pci0 dev 1 function 0: vendor 1002 product
9854 (rev. 0x02)
[ 1.046947] hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
[ 1.046947] hdaudio0: interrupting at msi0 vec 0
[ 1.046947] hdafg0 at hdaudio0: vendor 1002 product aa01
[ 1.046947] hdafg0: HDMI00 2ch: Digital Out [Jack]
[ 1.046947] hdafg0: HDMI01 2ch: Digital Out [Jack]
[ 1.046947] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
[ 1.046947] pchb1 at pci0 dev 2 function 0: vendor 1022 product
156b (rev. 0x00)
[ 1.046947] ppb0 at pci0 dev 2 function 2: vendor 1022 product
1439 (rev. 0x00)
[ 1.046947] ppb0: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.046947] ppb0: link is x1 @ 2.5GT/s
[ 1.046947] pci1 at ppb0 bus 1
[ 1.046947] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.046947] wm0 at pci1 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.046947] wm0: for TX and RX interrupting at msix1 vec 0 affinity to 1
[ 1.046947] wm0: for TX and RX interrupting at msix1 vec 1 affinity to 2
[ 1.046947] wm0: for LINK interrupting at msix1 vec 2
[ 1.046947] wm0: PCI-Express bus
[ 1.046947] wm0: 64 words iNVM, version 0.4
[ 1.046947] wm0: Ethernet address 00:01:c0:19:2a:3f
[ 1.046947] wm0: Copper
[ 1.046947] wm0:
0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.046947] ukphy0 at wm0 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
[ 1.046947] ukphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.046947] ppb1 at pci0 dev 2 function 3: vendor 1022 product
1439 (rev. 0x00)
[ 1.046947] ppb1: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.046947] ppb1: link is x1 @ 2.5GT/s
[ 1.046947] pci2 at ppb1 bus 2
[ 1.046947] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.046947] wm1 at pci2 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.046947] wm1: for TX and RX interrupting at msix2 vec 0 affinity to 1
[ 1.046947] wm1: for TX and RX interrupting at msix2 vec 1 affinity to 2
[ 1.046947] wm1: for LINK interrupting at msix2 vec 2
[ 1.046947] wm1: PCI-Express bus
[ 1.046947] wm1: 64 words iNVM, version 0.4
[ 1.046947] wm1: Ethernet address 00:01:c0:19:2a:3e
[ 1.046947] wm1: Copper
[ 1.046947] wm1:
0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.046947] ukphy1 at wm1 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
[ 1.046947] ukphy1: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.046947] ppb2 at pci0 dev 2 function 4: vendor 1022 product
1439 (rev. 0x00)
[ 1.046947] ppb2: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.046947] ppb2: link is x1 @ 2.5GT/s
[ 1.046947] pci3 at ppb2 bus 3
[ 1.046947] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.046947] wm2 at pci3 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.046947] wm2: for TX and RX interrupting at msix3 vec 0 affinity to 1
[ 1.046947] wm2: for TX and RX interrupting at msix3 vec 1 affinity to 2
[ 1.046947] wm2: for LINK interrupting at msix3 vec 2
[ 1.046947] wm2: PCI-Express bus
[ 1.046947] wm2: 64 words iNVM, version 0.4
[ 1.046947] wm2: Ethernet address 00:01:c0:19:2a:34
[ 1.046947] wm2: Copper
[ 1.046947] wm2:
0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.046947] ukphy2 at wm2 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
[ 1.046947] ukphy2: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.046947] ppb3 at pci0 dev 2 function 5: vendor 1022 product
1439 (rev. 0x00)
[ 1.046947] ppb3: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.046947] ppb3: link is x1 @ 2.5GT/s
[ 1.046947] pci4 at ppb3 bus 4
[ 1.046947] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.046947] wm3 at pci4 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
[ 1.046947] wm3: for TX and RX interrupting at msix4 vec 0 affinity to 1
[ 1.046947] wm3: for TX and RX interrupting at msix4 vec 1 affinity to 2
[ 1.046947] wm3: for LINK interrupting at msix4 vec 2
[ 1.046947] wm3: PCI-Express bus
[ 1.046947] wm3: 64 words iNVM, version 0.4
[ 1.046947] wm3: Ethernet address 00:01:c0:18:b0:05
[ 1.046947] wm3: Copper
[ 1.046947] wm3:
0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
[ 1.046947] ukphy3 at wm3 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
[ 1.046947] ukphy3: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.046947] vendor 1022 product 1537 (miscellaneous crypto) at
pci0 dev 8 function 0 not configured
[ 1.046947] xhci0 at pci0 dev 16 function 0: vendor 1022 product
7814 (rev. 0x11)
[ 1.046947] xhci0: interrupting at msix5 vec 0
[ 1.046947] xhci0: xHCI version 1.0
[ 1.046947] usb0 at xhci0: USB revision 3.0
[ 1.046947] usb1 at xhci0: USB revision 2.0
[ 1.046947] ahcisata0 at pci0 dev 17 function 0: vendor 1022
product 7801 (rev. 0x40)
[ 1.046947] ahcisata0: 64-bit DMA
[ 1.046947] ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP
0xf732ff21<SXS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
[ 1.046947] ahcisata0: interrupting at msi6 vec 0
[ 1.046947] atabus0 at ahcisata0 channel 0
[ 1.046947] atabus1 at ahcisata0 channel 1
[ 1.046947] ehci0 at pci0 dev 18 function 0: vendor 1022 product
7808 (rev. 0x39)
[ 1.046947] ehci0: interrupting at ioapic0 pin 18
[ 1.046947] ehci0: BIOS has given up ownership
[ 1.046947] ehci0: EHCI version 1.0
[ 1.046947] usb2 at ehci0: USB revision 2.0
[ 1.046947] ehci1 at pci0 dev 19 function 0: vendor 1022 product
7808 (rev. 0x39)
[ 1.046947] ehci1: interrupting at ioapic0 pin 18
[ 1.046947] ehci1: BIOS has given up ownership
[ 1.046947] ehci1: EHCI version 1.0
[ 1.046947] usb3 at ehci1: USB revision 2.0
[ 1.046947] piixpm0 at pci0 dev 20 function 0: vendor 1022 product
780b (rev. 0x42)
[ 1.046947] piixpm0: polling (SB800)
[ 1.046947] iic0 at piixpm0: I2C bus
[ 1.046947] hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
[ 1.046947] hdaudio1: interrupting at ioapic0 pin 16
[ 1.046947] hdafg1 at hdaudio1: vendor 10ec product 0888
[ 1.046947] hdafg1: DAC00 8ch: Speaker [Jack]
[ 1.046947] hdafg1: DAC01 2ch: HP Out [Jack]
[ 1.046947] hdafg1: ADC02 2ch: CD [Built-In], Line In [Jack], Mic In [Jack]
[ 1.046947] hdafg1: DIG03 2ch: SPDIF Out [Jack]
[ 1.046947] hdafg1: ADC04 2ch: Mic In [Jack]
[ 1.046947] hdafg1: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16
PCM20 PCM24 AC3
[ 1.046947] audio0 at hdafg1: full duplex, playback, capture,
mmap, independent
[ 1.046947] hdafg1: Virtual format configured - Format SLINEAR,
precision 16, channels 2, frequency 48000
[ 1.046947] hdafg1: Latency: 128 milliseconds
[ 1.046947] spkr1 at audio0: PC Speaker (synthesized)
[ 1.046947] wsbell at spkr1 not configured
[ 1.046947] pcib0 at pci0 dev 20 function 3: vendor 1022 product
780e (rev. 0x11)
[ 1.046947] sdhc0 at pci0 dev 20 function 7: vendor 1022 product
7813 (rev. 0x01)
[ 1.046947] sdhc0: interrupting at ioapic0 pin 16
[ 1.046947] sdhc0: SDHC 2.0, rev 16, SDMA, 50000 kHz, HS 3.3V,
2048 byte blocks
[ 1.046947] sdmmc0 at sdhc0 slot 0
[ 1.046947] pchb2 at pci0 dev 24 function 0: vendor 1022 product
1580 (rev. 0x00)
[ 1.046947] pchb3 at pci0 dev 24 function 1: vendor 1022 product
1581 (rev. 0x00)
[ 1.046947] pchb4 at pci0 dev 24 function 2: vendor 1022 product
1582 (rev. 0x00)
[ 1.046947] amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
[ 1.046947] amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family16h)
[ 1.046947] pchb5 at pci0 dev 24 function 4: vendor 1022 product
1584 (rev. 0x00)
[ 1.046947] pchb6 at pci0 dev 24 function 5: vendor 1022 product
1585 (rev. 0x00)
[ 1.046947] isa0 at pcib0
[ 1.046947] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
[ 1.046947] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
[ 1.046947] pckbc0 at isa0 port 0x60-0x64
[ 1.046947] pckbd0 at pckbc0 (kbd slot)
[ 1.046947] pckbc0: using irq 1 for kbd slot
[ 1.046947] wskbd0 at pckbd0: console keyboard
[ 1.046947] pms0 at pckbc0 (aux slot)
[ 1.046947] pckbc0: using irq 12 for aux slot
[ 1.046947] wsmouse0 at pms0 mux 0
[ 1.046947] acpicpu0 at cpu0: ACPI CPU
[ 1.046947] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.046947] acpicpu0: C2: I/O, lat 400 us, pow 0 mW
[ 1.046947] acpicpu0: P0: FFH, lat 4 us, pow 1006 mW, 1000 MHz
[ 1.046947] acpicpu0: P1: FFH, lat 4 us, pow 840 mW, 800 MHz
[ 1.046947] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.046947] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.046947] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.046947] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.046947] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.046947] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.046947] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.046947] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.046947] acpicpu1 at cpu1: ACPI CPU
[ 1.046947] acpicpu2 at cpu2: ACPI CPU
[ 1.046947] acpicpu3 at cpu3: ACPI CPU
[ 1.046947] timecounter: Timecounter "clockinterrupt" frequency
100 Hz quality 0
[ 2.100831] autoconfiguration error: ERROR: 307 cycle TSC drift observed
[ 2.100831] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000),
class 9/0, rev 3.00/1.00, addr 0
[ 2.100831] uhub0: 2 ports with 2 removable, self powered
[ 2.100831] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000),
class 9/0, rev 2.00/1.00, addr 0
[ 2.100831] uhub1: 2 ports with 2 removable, self powered
[ 2.210892] uhub2 at usb3: NetBSD (0000) EHCI root hub (0000),
class 9/0, rev 2.00/1.00, addr 1
[ 2.210892] uhub2: 2 ports with 2 removable, self powered
[ 2.210892] uhub3 at usb2: NetBSD (0000) EHCI root hub (0000),
class 9/0, rev 2.00/1.00, addr 1
[ 2.210892] uhub3: 2 ports with 2 removable, self powered
[ 2.210892] sdhc0: cmd timeout error
[ 2.210892] sdmmc0: sdmmc_mem_enable failed with error 60
[ 2.210892] sdmmc0: autoconfiguration error: couldn't enable card: 60
[ 2.230904] IPsec: Initialized Security Association Processing.
[ 2.260921] ahcisata0 port 1: device present, speed: 6.0Gb/s
[ 3.091379] autoconfiguration error: ahcisata0 port 1: clearing
WDCTL_RST failed for drive 15
[ 3.591655] autoconfiguration error: ahcisata0 port 1: drive 15
reset failed, disabling PMP
[ 3.691710] ahcisata0 port 1: device present, speed: 6.0Gb/s
[ 4.462135] uhub4 at uhub2 port 1: vendor 0438 (0x438) product
7900 (0x7900), class 9/0, rev 2.00/0.18, addr 2
[ 4.462135] uhub4: single transaction translator
[ 4.462135] uhub5 at uhub3 port 1: vendor 0438 (0x438) product
7900 (0x7900), class 9/0, rev 2.00/0.18, addr 2
[ 4.462135] uhub5: single transaction translator
[ 4.462135] uhub5: 4 ports with 4 removable, self powered
[ 4.462135] uhub4: 4 ports with 4 removable, self powered
[ 4.522168] autoconfiguration error: ahcisata0 port 1: clearing
WDCTL_RST failed for drive 0
[ 5.672801] umass0 at uhub5 port 4 configuration 1 interface 0
[ 5.672801] umass0: SanDisk (0x781) Extreme (0x5580), rev 2.10/0.10, addr 3
[ 5.672801] umass0: using SCSI over Bulk-Only
[ 5.672801] scsibus0 at umass0: 2 targets, 1 lun per target
[ 5.682808] sd0 at scsibus0 target 0 lun 0: <SanDisk, Extreme,
0001> disk removable
[ 5.682808] uhidev0 at uhub4 port 2 configuration 1 interface 0
[ 5.682808] uhidev0: Lite-On Technology Corp. (0x17ef) ThinkPad
USB Keyboard with TrackPoint (0x6009), rev 1.10/1.27, addr 3, iclass
3/1
[ 5.692813] ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
[ 5.922940] sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
[ 5.922940] SENSE KEY: Not Ready
[ 5.922940] ASC/ASCQ: Logical Unit Is In Process Of Becoming Ready
[ 5.922940] sd0: drive offline
[ 5.922940] sd0: fabricating a geometry
[ 5.932986] sd0: 119582720 trailing sectors not covered by disklabel
[ 6.093033] wskbd1 at ukbd0 mux 1
[ 6.093033] uhidev1 at uhub4 port 2 configuration 1 interface 1
[ 6.093033] uhidev1: Lite-On Technology Corp. (0x17ef) ThinkPad
USB Keyboard with TrackPoint (0x6009), rev 1.10/1.27, addr 3, iclass
3/0
[ 6.103039] uhidev1: 4 report ids
[ 6.103039] ums0 at uhidev1 reportid 1: 3 buttons
[ 6.103039] wsmouse1 at ums0 mux 0
[ 6.103039] uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
[ 6.103039] uhid1 at uhidev1 reportid 3: input=3, output=1, feature=0
[ 6.103039] uhid2 at uhidev1 reportid 4: input=0, output=0, feature=4
[ 6.103039] sd0: 119582720 trailing sectors not covered by disklabel
[ 6.113044] sd0: 119582720 trailing sectors not covered by disklabel
[ 6.123050] sd0: 119582720 trailing sectors not covered by disklabel
[ 6.123050] sd0: 119582720 trailing sectors not covered by disklabel
[ 6.123050] WARNING: 5 errors while detecting hardware; check system log.
[ 6.123050] boot device: sd0
[ 6.123050] root on sd0a dumps on sd0b
[ 6.133055] sd0: 119582720 trailing sectors not covered by disklabel
[ 6.133055] root file system type: ffs
[ 6.143100] kern.module.path=/stand/amd64/8.99.30/modules
[ 6.143100] kern info: [drm] initializing kernel modesetting
(MULLINS 0x1002:0x9854 0x1002:0x0123).
[ 6.143100] kern info: [drm] register mmio base: 0xfea00000
[ 6.143100] kern info: [drm] register mmio size: 262144
[ 6.143100] kern info: [drm] doorbell mmio base: 0xD0000000
[ 6.143100] kern info: [drm] doorbell mmio size: 8388608
[ 6.153105] WARNING: clock lost 1473 days
[ 6.153105] WARNING: using filesystem time
[ 6.154476] WARNING: CHECK AND RESET THE DATE!
[ 6.154476] kern info: ATOM BIOS: AMD
[ 6.154476] radeon0: info: VRAM: 256M 0x0000000000000000 -
0x000000000FFFFFFF (256M used)
[ 6.154476] radeon0: info: GTT: 2048M 0x0000000010000000 -
0x000000008FFFFFFF
[ 6.154476] kern info: [drm] Detected VRAM RAM=100M, BAR=256M
[ 6.154476] kern info: [drm] RAM width 128bits DDR
[ 6.154476] Zone kernel: Available graphics memory: 2506878 kiB
[ 6.154476] Zone dma32: Available graphics memory: 2097152 kiB
[ 6.154476] kern info: [drm] radeon: 256M of VRAM memory ready
[ 6.154476] kern info: [drm] radeon: 2048M of GTT memory ready.
[ 6.154476] kern info: [drm] Loading mullins Microcode
[ 6.183088] kern info: [drm] Internal thermal controller without fan control
[ 6.183088] kern info: [drm] radeon: dpm initialized
[ 6.203094] kern info: [drm] GART: num cpu pages 524288, num gpu
pages 524288
[ 6.283140] kern info: [drm] PCIE GART of 2048M enabled (table at
0x0000000000278000).
[ 6.283140] radeon0: info: WB enabled
[ 6.293147] radeon0: info: fence driver on ring 0 use gpu addr
0x0000000010000c00 and cpu addr 0x0xffff99994d522c00
[ 6.293147] radeon0: info: fence driver on ring 1 use gpu addr
0x0000000010000c04 and cpu addr 0x0xffff99994d522c04
[ 6.293147] radeon0: info: fence driver on ring 2 use gpu addr
0x0000000010000c08 and cpu addr 0x0xffff99994d522c08
[ 6.293147] radeon0: info: fence driver on ring 3 use gpu addr
0x0000000010000c0c and cpu addr 0x0xffff99994d522c0c
[ 6.293147] radeon0: info: fence driver on ring 4 use gpu addr
0x0000000010000c10 and cpu addr 0x0xffff99994d522c10
[ 6.323161] radeon0: info: fence driver on ring 5 use gpu addr
0x0000000000076c98 and cpu addr 0x0xffff9e80aa066c98
[ 6.323161] radeon0: autoconfiguration error: error: VCE init error (-22).
[ 6.323161] kern info: [drm] Supports vblank timestamp caching Rev
2 (21.10.2013).
[ 6.323161] kern info: [drm] Driver supports precise vblank timestamp query.
[ 6.323161] radeon0: interrupting at ioapic1 pin 20 (radeon0)
[ 6.323161] kern info: [drm] radeon: irq initialized.
[ 6.333164] kern info: [drm] ring test on 0 succeeded in 3 usecs
[ 6.333164] kern info: [drm] ring test on 1 succeeded in 2 usecs
[ 6.333164] kern info: [drm] ring test on 2 succeeded in 2 usecs
[ 6.333164] kern info: [drm] ring test on 3 succeeded in 5 usecs
[ 6.333164] kern info: [drm] ring test on 4 succeeded in 5 usecs
[ 6.363179] kern info: [drm] ring test on 5 succeeded in 2 usecs
[ 6.363179] kern info: [drm] UVD initialized successfully.
[ 6.363179] kern info: [drm] ib test on ring 0 succeeded in 0 usecs
[ 6.863458] kern info: [drm] ib test on ring 1 succeeded in 0 usecs
[ 6.863458] kern info: [drm] ib test on ring 2 succeeded in 0 usecs
[ 6.863458] kern info: [drm] ib test on ring 3 succeeded in 0 usecs
[ 6.863458] kern info: [drm] ib test on ring 4 succeeded in 0 usecs
[ 7.363734] kern info: [drm] ib test on ring 5 succeeded
[ 7.363734] kern info: [drm] Radeon Display Connectors
[ 7.363734] kern info: [drm] Connector 0:
[ 7.363734] kern info: [drm] HDMI-A-1
[ 7.363734] kern info: [drm] HPD1
[ 7.363734] kern info: [drm] DDC: 0x6530 0x6530 0x6534 0x6534
0x6538 0x6538 0x653c 0x653c
[ 7.363734] kern info: [drm] Encoders:
[ 7.363734] kern info: [drm] DFP1: INTERNAL_UNIPHY
[ 7.363734] kern info: [drm] Connector 1:
[ 7.363734] kern info: [drm] HDMI-A-2
[ 7.363734] kern info: [drm] HPD2
[ 7.363734] kern info: [drm] DDC: 0x6540 0x6540 0x6544 0x6544
0x6548 0x6548 0x654c 0x654c
[ 7.363734] kern info: [drm] Encoders:
[ 7.363734] kern info: [drm] DFP2: INTERNAL_UNIPHY
[ 7.613869] radeondrmkmsfb0 at radeon0
[ 7.623874] radeondrmkmsfb0: framebuffer at 0xffff9e80aaafe000,
size 1920x1080, depth 32, stride 7680
[ 9.244767] wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console
(default, vt100 emulation), using wskbd0
[ 9.344822] wsmux1: connecting to wsdisplay0
[ 9.344822] wskbd1: connecting to wsdisplay0
2019年1月13日(日) 0:20 Jaromír Doleček <jaromir.dolecek%gmail.com@localhost>:
>
> The following reply was made to PR kern/53307; it has been noted by GNATS.
>
> From: =?UTF-8?B?SmFyb23DrXIgRG9sZcSNZWs=?= <jaromir.dolecek%gmail.com@localhost>
> To: "gnats-bugs%NetBSD.org@localhost" <gnats-bugs%netbsd.org@localhost>
> Cc:
> Subject: Re: kern/53307 (ahcisata(4): Failed to attach mSATA SSD (WDCTL_RST failed))
> Date: Sat, 12 Jan 2019 16:18:52 +0100
>
> Thank you. Can you check with rev. 1.73 of sys/dev/ic/ahcisata_core.c,
> if it changes anything?
>
> Jaromir
>
> Le sam. 12 janv. 2019 =C3=A0 16:05, Kimihiro Nonaka <nonakap%gmail.com@localhost> a =
> =C3=A9crit :
> >
> > The following reply was made to PR kern/53307; it has been noted by GNATS=
> .
> >
> > From: Kimihiro Nonaka <nonakap%gmail.com@localhost>
> > To: =3D?UTF-8?B?SmFyb23DrXIgRG9sZcSNZWs=3D?=3D <jaromir.dolecek%gmail.com@localhost=
> >
> > Cc: "gnats-bugs%NetBSD.org@localhost" <gnats-bugs%netbsd.org@localhost>
> > Subject: Re: kern/53307 (ahcisata(4): Failed to attach mSATA SSD (WDCTL_R=
> ST failed))
> > Date: Sun, 13 Jan 2019 00:02:32 +0900
> >
> > Full dmesg:
>
Home |
Main Index |
Thread Index |
Old Index