Re: port-i386/43331: X server locks up under -current on NEC Versa DayLite laptop

[Andreas Gustafsson <gson%gson.org@localhost>]

The following reply was made to PR port-i386/43331; it has been noted by GNATS.

From: Andreas Gustafsson <gson%gson.org@localhost>
To: coypu%sdf.org@localhost
Cc: gnats-bugs%NetBSD.org@localhost
Subject: Re: port-i386/43331: X server locks up under -current on NEC Versa
 DayLite laptop
Date: Sat, 29 Dec 2018 14:25:29 +0200

 coypu%sdf.org@localhost wrote:
 >  What does it attach as, if there's no pckbc at acpi? isa?
 
 Yes.  Here's the full dmesg from booting a kernel configured
 with "no pckbc* at acpi?":
 
 [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
 [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
 [   1.0000000]     2018 The NetBSD Foundation, Inc.  All rights reserved.
 [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [   1.0000000]     The Regents of the University of California.  All rights reserved.
 
 [   1.0000000] NetBSD 8.99.22 (GUNNEL) #0: Sun Jul 29 20:50:17 EEST 2018
 [   1.0000000] 	gson%guido.araneus.fi@localhost:/ssd/prod/gunnel.current/i386/obj/sys/arch/i386/compile/GUNNEL
 [   1.0000000] total memory = 175 MB
 [   1.0000000] avail memory = 147 MB
 [   1.0000000] timecounter: Timecounters tick every 10.000 msec
 [   1.0000000] Kernelized RAIDframe activated
 [   1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done
 [   1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 [   1.0000030] NEC                              VUS6BCE-00B-000 (                                )
 [   1.0000030] mainbus0 (root)
 [   1.0000030] ACPI: RSDP 0x00000000000F7330 000014 (v00 PTLTD )
 [   1.0000030] ACPI: RSDT 0x000000000AFFA5B9 000028 (v01 NEC    ND000034 06040005  LTP 00000000)
 [   1.0000030] ACPI: FACP 0x000000000AFFFB8C 000074 (v01 NEC    ND000034 06040005 PTL  000F4240)
 [   1.0000030] ACPI: DSDT 0x000000000AFFA5E1 0055AB (v01 NEC    ND000034 06040005 MSFT 0100000B)
 [   1.0000030] ACPI: FACS 0x000000000AFFFFC0 000040
 [   1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded
 [   1.0000030] cpu0 at mainbus0
 [   1.0000030] cpu0: Transmeta(tm) Crusoe(tm) Processor TMTM5600, id 0x543
 [   1.0000030] cpu0: package 0, core 0, smt 0
 [   1.0000030] acpi0 at mainbus0: Intel ACPICA 20180427
 [   1.0000030] acpi0: X/RSDT: OemId <NEC   ,ND000034,06040005>, AslId < LTP,00000000>
 [   1.0000030] LNK1: ACPI: Found matching pin for 0.3.INTA at func 0: 255
 [   1.0000030] LNK2: ACPI: Found matching pin for 0.4.INTA at func 0: 11
 [   1.0000030] LNK3: ACPI: Found matching pin for 0.5.INTA at func 0: 10
 [   1.0000030] LNK1: ACPI: Found matching pin for 0.6.INTA at func 0: 9
 [   1.0000030] LNKU: ACPI: Found matching pin for 0.20.INTA at func 0: 5
 [   1.0000030] acpi0: SCI interrupting at int 9
 [   1.0000030] acpi0: fixed power button present
 [   1.0000030] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
 [   1.0022541] attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
 [   1.0022541] MATH (PNP0C04) at acpi0 not configured
 [   1.0022541] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 [   1.0022541] midi0 at pcppi1: PC speaker
 [   1.0022541] sysbeep0 at pcppi1
 [   1.0022541] USKB (PNP0303) at acpi0 not configured
 [   1.0022541] SYSR (PNP0C02) at acpi0 not configured
 [   1.0022541] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
 [   1.0022541] acpiacad0 at acpi0 (ADP, ACPI0003): ACPI AC Adapter
 [   1.0022541] acpibat0 at acpi0 (BAT2, PNP0C0A-2): ACPI Battery
 [   1.0022541] acpifan0 at acpi0 (LRA0, PNP0C0B): ACPI Fan
 [   1.0022541] acpitz0 at acpi0 (THRM)
 [   1.0022541] acpitz0: levels: critical 100.0 C, passive cooling
 [   1.0022541] apm0 at acpi0: Power Management spec V1.2
 [   1.0022541] ACPI: Enabled 1 GPEs in block 00 to 3F
 [   1.0022541] attimer1: attached to pcppi1
 [   1.0022541] pci0 at mainbus0 bus 0: configuration mode 1
 [   1.0022541] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 [   1.0022541] pchb0 at pci0 dev 0 function 0: vendor 1279 product 0395 (rev. 0x00)
 [   1.0022541] vendor 1279 product 0396 (RAM memory) at pci0 dev 0 function 1 not configured
 [   1.0022541] vendor 1279 product 0397 (RAM memory) at pci0 dev 0 function 2 not configured
 [   1.0022541] cbb0 at pci0 dev 3 function 0: vendor 104c product ac50 (rev. 0x01)
 [   1.0022541] eso0 at pci0 dev 4 function 0: ESS Solo-1 PCI AudioDrive ES1946 Revision E
 [   1.0022541] eso0: interrupting at irq 11
 [   1.0022541] eso0: mapping Audio 1 DMA using VC I/O space at 0x1480
 [   1.0022541] audio0 at eso0: full duplex, playback, capture, mmap, independent
 [   1.0022541] eso0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
 [   1.0022541] eso0: Latency: 256 milliseconds
 [   1.0022541] opl0 at eso0: model OPL3
 [   1.0022541] midi1 at opl0: ESO Yamaha OPL3
 [   1.0022541] mpu0 at eso0
 [   1.0022541] midi2 at mpu0: ESO MPU-401 MIDI UART
 [   1.0022541] joy0 at eso0
 [   1.0022541] joy0: joystick not connected
 [   1.0022541] vga0 at pci0 dev 5 function 0: vendor 1002 product 4c52 (rev. 0x64)
 [   1.0022541] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
 [   1.0022541] wsmux1: connecting to wsdisplay0
 [   1.0022541] drm at vga0 not configured
 [   1.0022541] fxp0 at pci0 dev 6 function 0: i82559S Ethernet (rev. 0x09)
 [   1.0022541] fxp0: interrupting at irq 9
 [   1.0022541] fxp0: May need receiver lock-up workaround
 [   1.0022541] fxp0: Ethernet address 00:10:a4:16:62:84
 [   1.0022541] inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
 [   1.0022541] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 [   1.0022541] vendor 115d product 002b (serial communications, 16550-compat) at pci0 dev 6 function 1 not configured
 [   1.0022541] pcib0 at pci0 dev 7 function 0: vendor 10b9 product 1533 (rev. 0x00)
 [   1.0022541] aceride0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
 [   1.0022541] aceride0: bus-master DMA support present
 [   1.0022541] aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
 [   1.0022541] aceride0: primary channel wired to compatibility mode
 [   1.0022541] aceride0: primary channel interrupting at irq 14
 [   1.0022541] atabus0 at aceride0 channel 0
 [   1.0022541] aceride0: secondary channel wired to compatibility mode
 [   1.0022541] aceride0: secondary channel interrupting at irq 15
 [   1.0022541] atabus1 at aceride0 channel 1
 [   1.0022541] alipm0 at pci0 dev 17 function 0: 74KHz clock
 [   1.0022541] iic0 at alipm0: I2C bus
 [   1.0022541] ohci0 at pci0 dev 20 function 0: vendor 10b9 product 5237 (rev. 0x03)
 [   1.0022541] ohci0: interrupting at irq 5
 [   1.0022541] ohci0: OHCI version 1.0, legacy support
 [   1.0022541] usb0 at ohci0: USB revision 1.0
 [   1.0022541] cbb0: cacheline 0x8 lattimer 0x51
 [   1.0022541] cbb0: bhlc 0x25108
 [   1.0022541] cbb0: interrupting at irq 9
 [   1.0022541] cardslot0 at cbb0
 [   1.0022541] cardbus0 at cardslot0: bus 1
 [   1.0022541] pcmcia0 at cardslot0
 [   1.0022541] isa0 at pcib0
 [   1.0022541] pckbc0 at isa0 port 0x60-0x64
 [   1.0022541] pckbd0 at pckbc0 (kbd slot)
 [   1.0022541] pckbc0: using irq 1 for kbd slot
 [   1.0022541] wskbd0 at pckbd0: console keyboard, using wsdisplay0
 [   1.0022541] pms0 at pckbc0 (aux slot)
 [   1.0022541] pckbc0: using irq 12 for aux slot
 [   1.0022541] wsmouse0 at pms0 mux 0
 [   1.0022541] acpicpu0 at cpu0: ACPI CPU
 [   1.0022541] acpicpu0: C1: HLT, lat   0 us, pow     0 mW
 [   1.0022541] acpicpu0: C2: I/O, lat  10 us, pow     0 mW
 [   1.0022541] acpicpu0: C3: I/O, lat  32 us, pow     0 mW
 [   1.0022541] acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
 [   1.0022541] acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
 [   1.0022541] acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
 [   1.0022541] acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
 [   1.0022541] acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
 [   1.0022541] acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
 [   1.0022541] acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
 [   1.0022541] acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
 [   1.0022541] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 [   1.5736044] acpiacad0: AC adapter online.
 [   1.6556880] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
 [   1.6636228] uhub0: 2 ports with 2 removable, self powered
 [   1.8336844] IPsec: Initialized Security Association Processing.
 [   4.8236180] wd0 at atabus0 drive 0
 [   4.8337260] wd0: <IC25N020ATCS04-0>
 [   4.8337260] wd0: drive supports 16-sector PIO transfers, LBA addressing
 [   4.8337260] wd0: 19077 MB, 41344 cyl, 15 head, 63 sec, 512 bytes/sect x 39070080 sectors
 [   4.9536829] wd0: 32-bit data port
 [   4.9536829] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 [   4.9636255] wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
 [   5.3937410] boot device: wd0
 [   5.3937410] root on wd0a dumps on wd0b
 [   5.5936220] root file system type: ffs
 [   5.6036674] kern.module.path=/stand/i386/8.99.22/modules
 [   5.6036674] WARNING: clock gained 152 days
 
 I will respond to your other questions separately.
 -- 
 Andreas Gustafsson, gson%gson.org@localhost