NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kern/53535: lockup with nouveau updating fans
The following reply was made to PR kern/53535; it has been noted by GNATS.
From: Martin Husemann <martin%duskware.de@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc:
Subject: Re: kern/53535: lockup with nouveau updating fans
Date: Fri, 17 Aug 2018 15:23:39 +0200
Here is the full dmesg.
Martin
NetBSD 8.0_STABLE (EMMAS) #0: Wed Aug 15 11:55:07 CEST 2018
martin%seven-days-to-the-wolves.aprisoft.de@localhost:/work/src-8/sys/arch/amd64/compile/EMMAS
total memory = 8127 MB
avail memory = 7867 MB
cpu_rng: RDSEED
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000D699E098 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000D69A8930 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-693)
ACPI: DSDT 0x00000000D699E1D0 00A760 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DAE53E00 000040
ACPI: APIC 0x00000000D69A8A48 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D69A8B28 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000D69A8B70 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000D69B6378 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000D69A8C68 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000D69B1900 00119C (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000D69B2AA0 000850 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000D69B32F0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000D69B3320 002DA8 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000D69B60C8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000D69B6108 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000D69B6140 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000D69B6168 000042 (v01 00000000 00000000)
ACPI: IVRS 0x00000000D69B61B0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000D69B6280 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI Error: Needed [Integer/String/Buffer], found [Region] 0xfffffe821d0aea08 (20170303/exresop-443)
ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [IOB2] (Region) (20170303/nsinit-443)
ioapic0 at mainbus0 apid 9: pa 0xfec00000, version 0x21, 24 pins
ioapic1 at mainbus0 apid 10: pa 0xfec01000, version 0x21, 32 pins
cpu0 at mainbus0 apid 0
cpu0: AMD Ryzen 5 1400 Quad-Core Processor , id 0x800f11
cpu0: package 0, core 0, smt 0
cpu0: SVM disabled by the BIOS
cpu1 at mainbus0 apid 1
cpu1: AMD Ryzen 5 1400 Quad-Core Processor , id 0x800f11
cpu1: package 0, core 0, smt 1
cpu2 at mainbus0 apid 2
cpu2: AMD Ryzen 5 1400 Quad-Core Processor , id 0x800f11
cpu2: package 0, core 1, smt 0
cpu3 at mainbus0 apid 3
cpu3: AMD Ryzen 5 1400 Quad-Core Processor , id 0x800f11
cpu3: package 0, core 1, smt 1
cpu4 at mainbus0 apid 8
cpu4: AMD Ryzen 5 1400 Quad-Core Processor , id 0x800f11
cpu4: package 0, core 4, smt 0
cpu5 at mainbus0 apid 9
cpu5: AMD Ryzen 5 1400 Quad-Core Processor , id 0x800f11
cpu5: package 0, core 4, smt 1
cpu6 at mainbus0 apid 10
cpu6: AMD Ryzen 5 1400 Quad-Core Processor , id 0x800f11
cpu6: package 0, core 5, smt 0
cpu7 at mainbus0 apid 11
cpu7: AMD Ryzen 5 1400 Quad-Core Processor , id 0x800f11
cpu7: package 0, core 5, smt 1
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
AMDN (PNP0C01) at acpi0 not configured
UMEM (PNP0C02) at acpi0 not configured
APSP (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
S900 (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
GPIO (AMDI0030) at acpi0 not configured
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
ABR5 (PNP0C02) at acpi0 not configured
ABR6 (PNP0C02) at acpi0 not configured
ABR7 (PNP0C02) at acpi0 not configured
AWR1 (PNP0C02) at acpi0 not configured
ABR8 (PNP0C02) at acpi0 not configured
ABR9 (PNP0C02) at acpi0 not configured
ABRA (PNP0C02) at acpi0 not configured
ABRB (PNP0C02) at acpi0 not configured
ABRC (PNP0C02) at acpi0 not configured
ABRD (PNP0C02) at acpi0 not configured
ABRE (PNP0C02) at acpi0 not configured
ABRF (PNP0C02) at acpi0 not configured
PTIO (AMDIF030) at acpi0 not configured
acpiwmi0 at acpi0 (AMW0, PNP0C14-ASUSWMI): ACPI WMI Interface
wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
acpiwmi1 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
amdsmn0 at pci0 dev 0 function 0: AMD Family 17h System Management Network
amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h)
vendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 not configured
pchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb0 at pci0 dev 1 function 3: vendor 1022 product 1453 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci1 dev 0 function 0: vendor 1022 product 43bc (rev. 0x02)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.10 not known to be supported
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b8 (rev. 0x02)
ahcisata0: interrupting at ioapic1 pin 9
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP 0xef36ff27<SXS,PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ppb1 at pci1 dev 0 function 2: vendor 1022 product 43b3 (rev. 0x02)
ppb1: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb2: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci2 dev 5 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb3: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci2 dev 6 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb4: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci5 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x15)
re0: interrupting at msi1 vec 0
re0: Ethernet address 18:31:bf:6b:a7:ed
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb5 at pci2 dev 7 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci6 dev 0 function 0: vendor 1b21 product 1182 (rev. 0x00)
ppb6: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci7 dev 3 function 0: vendor 1b21 product 1182 (rev. 0x00)
ppb7: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb7: link is x1 @ 2.5GT/s
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
re1 at pci8 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x07)
re1: interrupting at msi2 vec 0
re1: Ethernet address 00:13:3b:2f:6d:da
re1: using 256 tx descriptors
rgephy1 at re1 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb8 at pci7 dev 7 function 0: vendor 1b21 product 1182 (rev. 0x00)
ppb8: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb8: link is x1 @ 2.5GT/s
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
re2 at pci9 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x07)
re2: interrupting at msi3 vec 0
re2: Ethernet address 00:13:3b:2f:6d:db
re2: using 256 tx descriptors
rgephy2 at re2 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5
rgephy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00)
pchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb9 at pci0 dev 3 function 1: vendor 1022 product 1453 (rev. 0x00)
ppb9: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
ppb9: link is x8 @ 5.0GT/s
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
nouveau0 at pci10 dev 0 function 0: vendor 10de product 128b (rev. 0xa1)
drm kern info: nouveau [ DEVICE][nouveau0] BOOT0 : 0xb060b0b1
drm kern info: nouveau [ DEVICE][nouveau0] Chipset: GK208B (NV106)
drm kern info: nouveau [ DEVICE][nouveau0] Family : NVE0
drm kern info: nouveau [ VBIOS][nouveau0] checking PRAMIN for image...
drm kern info: nouveau [ VBIOS][nouveau0] ... signature not found
drm kern info: nouveau [ VBIOS][nouveau0] checking PROM for image...
drm kern info: nouveau [ VBIOS][nouveau0] ... appears to be valid
drm kern info: nouveau [ VBIOS][nouveau0] using image from PROM
drm kern info: nouveau [ VBIOS][nouveau0] BIT signature found
drm kern info: nouveau [ VBIOS][nouveau0] version 80.28.a6.00.5f
nouveau0: interrupting at ioapic1 pin 30 (nouveau)
drm kern info: nouveau [ PFB][nouveau0] RAM type: DDR3
drm kern info: nouveau [ PFB][nouveau0] RAM size: 2048 MiB
drm kern info: nouveau [ PFB][nouveau0] ZCOMP: 0 tags
drm kern info: nouveau [ VOLT][nouveau0] GPU voltage: 912500uv
drm kern info: nouveau [ PTHERM][nouveau0] FAN control: toggle
drm kern info: nouveau [ PTHERM][nouveau0] fan management: automatic
drm kern info: nouveau [ PTHERM][nouveau0] internal sensor: yes
drm kern info: nouveau [ CLK][nouveau0] 07: core 405 MHz memory 810 MHz
drm kern info: nouveau [ CLK][nouveau0] 0f: core 653-954 MHz memory 1600 MHz
drm kern info: nouveau [ CLK][nouveau0] --: core 405 MHz memory 810 MHz
Zone kernel: Available graphics memory: 2583398 kiB
Zone dma32: Available graphics memory: 2097152 kiB
drm kern info: nouveau [ DRM] VRAM: 2048 MiB
drm kern info: nouveau [ DRM] GART: 1048576 MiB
drm kern info: nouveau [ DRM] TMDS table version 2.0
drm kern info: nouveau [ DRM] DCB version 4.0
drm kern info: nouveau [ DRM] DCB outp 00: 01000f02 00020030
drm kern info: nouveau [ DRM] DCB outp 01: 02011f62 00020010
drm kern info: nouveau [ DRM] DCB outp 02: 02022f10 00000000
drm kern info: nouveau [ DRM] DCB conn 00: 00001031
drm kern info: nouveau [ DRM] DCB conn 01: 00002161
drm kern info: nouveau [ DRM] DCB conn 02: 00000200
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
drm kern info: nouveau [ DRM] MM: using COPY for buffer copies
nouveau0: info: No connectors reported connected with modes
drm: Cannot find any crtc or sizes - going 1024x768
nouveaufb0 at nouveau0
nouveau0: info: registered panic notifier
nouveaufb0: framebuffer at 0xffff8000b0b5c000, size 1024x768, depth 32, stride 4096
wsdisplay0 at nouveaufb0 kbdmux 1
wsmux1: connecting to wsdisplay0
hdaudio0 at pci10 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at msi4 vec 0
hdafg0 at hdaudio0: vendor 10de product 0051
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: DP01 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
pchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00)
pchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb10 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00)
ppb10: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1022 product 145a (non-essential instrumentation, subclass 0x00) at pci11 dev 0 function 0 not configured
vendor 1022 product 1456 (miscellaneous crypto) at pci11 dev 0 function 2 not configured
xhci1 at pci11 dev 0 function 3: vendor 1022 product 145c (rev. 0x00)
xhci1: interrupting at msi5 vec 0
xhci1: xHCI version 1.0
usb2 at xhci1: USB revision 3.0
usb3 at xhci1: USB revision 2.0
pchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb11 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00)
ppb11: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci12 at ppb11 bus 12
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1022 product 1455 (non-essential instrumentation, subclass 0x00) at pci12 dev 0 function 0 not configured
ahcisata1 at pci12 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51)
ahcisata1: interrupting at ioapic1 pin 18
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.31, 1 port, 32 slots, CAP 0xf737ff00<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus4 at ahcisata1 channel 0
hdaudio1 at pci12 dev 0 function 3: HD Audio Controller
hdaudio1: interrupting at msi6 vec 0
hdafg1 at hdaudio1: vendor 10ec product 0887
hdafg1: DAC00 2ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Built-In]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
hdafg1: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg1: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
vendor 1022 product 790b (SMBus serial bus, revision 0x59) at pci0 dev 20 function 0 not configured
pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x51)
pchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. 0x00)
pchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. 0x00)
pchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. 0x00)
pchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. 0x00)
pchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. 0x00)
pchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. 0x00)
pchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. 0x00)
pchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 0 mW
acpicpu0: C2: I/O, lat 400 us, pow 0 mW
acpicpu0: P0: FFH, lat 1 us, pow 4000 mW, 3200 MHz
acpicpu0: P1: FFH, lat 1 us, pow 2940 mW, 2800 MHz
acpicpu0: P2: FFH, lat 1 us, pow 1331 mW, 1550 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 432 cycle TSC drift observed
uhub0 at usb0: vendor 1022 (0x1022) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: vendor 1022 (0x1022) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 9 ports with 9 removable, self powered
uhub2 at usb2: vendor 1022 (0x1022) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 1022 (0x1022) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub3: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 4: device present, speed: 6.0Gb/s
ahcisata0 port 0: device present, speed: 6.0Gb/s
uark0 at uhub1 port 6
uark0: ArkMicroChips (0x6547) USB-UART Controller (0x232), rev 1.10/0.01, addr 1
ucom0 at uark0 portno 0
wd0 at atabus0 drive 0
wd0: <WDC WD4002FFWX-68TZ4N0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 3726 GB, 7752021 cyl, 16 head, 63 sec, 512 bytes/sect x 7814037168 sectors
wd0: GPT GUID: 4441cb9f-48d6-42e9-996d-3c88575d70a8
dk0 at wd0: "92b850fb-1f39-46c3-99c7-6b85d2a732af", 7814037072 blocks at 48, type: raidframe
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <WDC WD4002FFWX-68TZ4N0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 3726 GB, 7752021 cyl, 16 head, 63 sec, 512 bytes/sect x 7814037168 sectors
wd1: GPT GUID: f3d31414-89b6-4696-9021-1a681a7c4926
dk1 at wd1: "0b6a527f-7960-4670-8e6c-4e3c38fd006d", 7814037072 blocks at 48, type: raidframe
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <Corsair Force 3 SSD>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
umass0 at uhub3 port 4 configuration 1 interface 0
umass0: JetFlash (0xc76) TS256MJF2A (0x05), rev 2.00/1.00, addr 1
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <JetFlash, TS256MJF2A, 1.00> disk fixed
sd0: fabricating a geometry
sd0: 250 MB, 250 cyl, 64 head, 32 sec, 512 bytes/sect x 512000 sectors
sd0: fabricating a geometry
uplcom0 at uhub1 port 9
uplcom0: Prolific Technology Inc. (0x67b) USB-Serial Controller (0x2303), rev 1.10/3.00, addr 2
ucom1 at uplcom0
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr2 at audio1: PC Speaker (synthesized)
raid0: RAID Level 1
raid0: Components: /dev/dk1 /dev/dk0
raid0: Total Sectors: 7814036992 (3815447 MB)
raid0: GPT GUID: 05c845f8-6a19-466a-8740-c1e223a15aad
dk2 at raid0: "emmas-root", 7805646848 blocks at 64, type: ffs
dk3 at raid0: "emmas-swap", 8390016 blocks at 7805646912, type: swap
WARNING: 1 error while detecting hardware; check system log.
boot device: sd0
root on dk0 dumps on dk3
root file system type: ffs
kern.module.path=/stand/amd64/8.0/modules
Home |
Main Index |
Thread Index |
Old Index