Re: kern/53301 (msk0 device reports no link, when there is link on same laptop with Windows and Linux.)

[Chris Humphries <chris%sogubsys.com@localhost>]

The device gets link but can't seem to get on a network. DHCP server
is functional on other machines in the house. I'm sorry, but it isn't
fixed for me.



uname -a
========
NetBSD neo.sogubsys.com 8.99.19 NetBSD 8.99.19 (GENERIC) #0: Tue Jun 12 06:07:15 EDT 2018  root%neo.sogubsys.com@localhost:/usr/obj/sys/arch/amd64/compile/GENERIC amd64


dmesg | grep msk
================
[    1.042116] msk0 at mskc0 port A: Ethernet address 00:24:54:b4:47:c3
[    1.042116] ukphy0 at msk0 phy 0: OUI 0x000ac2, model 0x0026, rev. 0


pcictl
======
000:00:0: Intel Iron Lake Host Bridge (host bridge, revision 0x02)
000:02:0: Intel Iron Lake Integrated Graphics Device (VGA display, revision 0x02)
000:22:0: Intel 3400 MEI (miscellaneous communications, revision 0x06)
000:26:0: Intel 3400 USB ECHI (USB serial bus, EHCI, revision 0x05)
000:27:0: Intel 3400 HD Audio (mixed mode multimedia, revision 0x05)
000:28:0: Intel 3400 PCIE (PCI bridge, revision 0x05)
000:28:2: Intel 3400 PCIE (PCI bridge, revision 0x05)
000:28:3: Intel 3400 PCIE (PCI bridge, revision 0x05)
000:29:0: Intel 3400 USB EHCI (USB serial bus, EHCI, revision 0x05)
000:30:0: Intel 82801BAM Hub-PCI Bridge (PCI bridge, subtractive decode, revision 0xa5)
000:31:0: Intel HM55 LPC Interface Bridge (ISA bridge, revision 0x05)
000:31:2: Intel 3400 AHCI (SATA mass storage, AHCI 1.0, revision 0x05)
000:31:3: Intel 3400 SMBus (SMBus serial bus, revision 0x05)
000:31:6: Intel 3400 Thermal (miscellaneous DASP, revision 0x05)
002:00:0: Intel WiFi Link 1000 (miscellaneous network)
006:00:0: Marvell Yukon 88E8040 (ethernet network)
063:00:0: Intel product 2c62 (host bridge, revision 0x02)
063:00:1: Intel Core i5-600, i3-500 and Pentium 6000 QuickPath Generic System Address Decoder (host bridge, revision 0x02)
063:02:0: Intel Core i5-600, i3-500 and Pentium 6000 QPI Link (host bridge, revision 0x02)
063:02:1: Intel Core i5-600, i3-500 and Pentium 6000 QPI Physical (host bridge, revision 0x02)
063:02:2: Intel Core i5-600, i3-500 and Pentium 6000 Reserved (host bridge, revision 0x02)
063:02:3: Intel Core i5-600, i3-500 and Pentium 6000 Reserved (host bridge, revision 0x02)


/etc/ifconfig.msk0
==================
up
!dhcpcd $int


ifconfig msk0
=============
msk0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	ec_capabilities=5<VLAN_MTU,JUMBO_MTU>
	ec_enabled=0
	address: 00:24:54:b4:47:c3
	media: Ethernet autoselect (none)
	status: active
	inet 169.254.34.66/16 broadcast 169.254.255.255 flags 0x0
	inet6 fe80::224:54ff:feb4:47c3%msk0/64 flags 0x0 scopeid 0x2


syslog for dhcpcd on the device
===============================
Jun 12 06:48:18 neo dhcpcd[248]: control command: dhcpcd -1 msk0
Jun 12 06:48:18 neo dhcpcd[248]: msk0: carrier acquired
Jun 12 06:48:18 neo dhcpcd[248]: msk0: IAID 54:b4:47:c3
Jun 12 06:48:19 neo dhcpcd[248]: msk0: soliciting a DHCP lease
Jun 12 06:48:19 neo dhcpcd[248]: msk0: soliciting an IPv6 router
Jun 12 06:48:24 neo dhcpcd[248]: msk0: probing for an IPv4LL address
Jun 12 06:48:24 neo dhcpcd[248]: msk0: using IPv4LL address 169.254.34.66
Jun 12 06:48:29 neo dhcpcd[248]: msk0: adding route to 169.254.0.0/16
Jun 12 06:48:31 neo dhcpcd[248]: msk0: no IPv6 Routers available




-- 
Chris Humphries <chris%sogubsys.com@localhost>
5223 9548 E1DE DE87 F509  1888 8141 8451 6338 DD29