Re: port-sparc64/52123 (hme interfaces do not work anymore (7.0.2,7.1))

[Timo Schöler <timo%kroenchenstadt.de@localhost>]

A little addition: dmesg attached, and I tried setting the interface's
MAC to a sane value (instead of broadcast aka default when the battery's
gone): ifconfig hme0 lladdr random (see below). Both values work.

Timo

-----

Last login: Wed Dec 31 01:11:14 1969 from 192.168.100.1
OpenBSD 6.3 (GENERIC.MP) #486: Sat Mar 24 22:37:16 MDT 2018

Welcome to OpenBSD: The proactively secure Unix-like operating system.

Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code.  With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.

u2# dmesg

console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2018 OpenBSD. All rights reserved.
https://www.OpenBSD.org

OpenBSD 6.3 (GENERIC.MP) #486: Sat Mar 24 22:37:16 MDT 2018
    deraadt%sparc64.openbsd.org@localhost:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 1342177280 (1280MB)
avail mem = 1303478272 (1243MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Ultra 2 UPA/SBus (2 X UltraSPARC-II 296MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-II (rev 2.0) @ 296.001 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K
external (64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-II (rev 2.0) @ 296.001 MHz
cpu1: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K
external (64 b/l)
"counter-timer" at mainbus0 addr 0xfffc3c00 not configured
sbus0 at mainbus0 addr 0xfffc8000: clock = 25 MHz
sbus0: dvma map ff800000-ffffffff, STC0 enabled
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 8
audio0 at audiocs0
auxio0 at sbus0 slot 15 offset 0x1900000
"flashprom" at sbus0 slot 15 offset 0x0 not configured
clock1 at sbus0 slot 15 offset 0x1200000: mk48t59
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
zskbd0 at zs1 channel 0: layout 33
wskbd0 at zskbd0: console keyboard
zsms0 at zs1 channel 1
wsmouse0 at zsms0 mux 0
uperf0 at sbus0 slot 15 offset 0x1300000: model SUNW,sc-mp (0/3) ports 4
"SUNW,pll" at sbus0 slot 15 offset 0x1304000 not configured
esp0 at sbus0 slot 14 offset 0x8800000 vector 20 ipl 3: dma rev fas
esp0: FAS366/HME, 40MHz
scsibus1 at esp0: 16 targets, initiator 7
sym0 at scsibus1 targ 1 lun 0: <FUJITSU, MAJ3182MC, 5508> SCSI2 0/direct
fixed serial.FUJITSU_MAJ3182MC_50052759
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAJ3182MC, 5508> SCSI2 0/direct
fixed serial.FUJITSU_MAJ3182MC_50052759
sd0: 17366MB, 512 bytes/sector, 35566478 sectors
cd0 at scsibus1 targ 6 lun 0: <TOSHIBA, XM5701TASUN12XCD, 0997> SCSI2
5/cdrom removable
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6, address
ff:ff:ef:ff:ff:ff
nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1
bpp0 at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2: dma rev unknown
(0x20000000)
creator0 at mainbus0 addr 0xfec00000: Creator, model SUNW,501-2634, dac
10, 1152x900
wsdisplay0 at creator0 mux 1: console (std, sun emulation), using wskbd0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /sbus@1f,0/SUNW,fas@e,8800000/sd@1,0
root on sd0a (5ef18dad29dfff59.a) swap on sd0b dump on sd0b
WARNING: preposterous time in file system
WARNING: clock lost 7852 days -- CHECK AND RESET THE DATE!



u2# ifconfig -a

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
        index 3 priority 0 llprio 3
        groups: lo
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
        inet 127.0.0.1 netmask 0xff000000
hme0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr 50:07:df:87:cc:87
        index 1 priority 0 llprio 3
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        inet 192.168.100.101 netmask 0xffffff00 broadcast 192.168.100.255
enc0: flags=0<>
        index 2 priority 0 llprio 3
        groups: enc
        status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136
        index 4 priority 0 llprio 3
        groups: pflog