Re: port-macppc/40232: machfb on Imac G3 333mhz does not work

To: port-macppc-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,dphosler%gmail.com@localhost
Subject: Re: port-macppc/40232: machfb on Imac G3 333mhz does not work
From: Sevan Janiyan <venture37%geeklan.co.uk@localhost>
Date: Sun, 18 Feb 2018 21:45:01 +0000 (UTC)
The following reply was made to PR port-macppc/40232; it has been noted by GNATS.

From: Sevan Janiyan <venture37%geeklan.co.uk@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: port-macppc/40232: machfb on Imac G3 333mhz does not work
Date: Sun, 18 Feb 2018 21:40:29 +0000

 Same behavior on the PowerBook G3 Lombard, disabling machfb clears up
 console corruption & allows X to start.
 
 dmesg
 http://dmesgd.nycbug.org/index.cgi?do=view&id=3495
 
 [   139.849] (II) MACH64: Driver for ATI Mach64 chipsets
 [   139.850] (II) wsfb: driver for wsdisplay framebuffer: wsfb
 [   139.851] (--) Using wscons driver on /dev/ttyE0 in pcvt
 compatibility mode (version 3.32)
 [   139.851] (--) using VT number 1
 [   139.851] (WW) xf86EnableIO 5
 [   139.851] (II) xf86EnableIO: 0xfce10000
 [   139.851] (WW) Falling back to old probe method for wsfb
 [   139.878] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
 support
 [   139.879] (II) MACH64(0): Creating default Display subsection in
 Screen section
 	"Builtin Default ati Screen 0" for depth/fbbpp 24/32
 [   139.879] (==) MACH64(0): Depth 24, (--) framebuffer bpp 32
 [   139.909] (==) MACH64(0): Using EXA acceleration architecture
 [   139.913] (II) MACH64: Mach64 in slot 0:17:0 detected.
 [   139.913] (II) ioctl failed 19
 [   139.913] (II) MACH64(0): BIOS Data:  BIOSSize=0x0000, ROMTable=0x0000.
 [   139.913] (II) MACH64(0): BIOS Data:  ClockTable=0x0000,
 FrequencyTable=0x0000.
 [   139.913] (II) MACH64(0): BIOS Data:  LCDTable=0x0000.
 [   139.913] (II) MACH64(0): BIOS Data:  VideoTable=0x0000,
 HardwareTable=0x0000.
 [   139.913] (II) MACH64(0): BIOS Data:  I2CType=0x00, Tuner=0x00,
 Decoder=0x00, Audio=0x0F.
 [   139.914] (--) MACH64(0): ATI 3D Rage LT Pro graphics controller
 detected.
 [   139.914] (--) MACH64(0): Chip type 4C49 "LI", version 4, foundry
 UMC, class 0, revision 0x03.
 [   139.914] (--) MACH64(0): PCI bus interface detected.
 [   139.914] (--) MACH64(0): ATI Mach64 adapter detected.
 [   139.914] (!!) MACH64(0): For information on using the multimedia
 capabilities
 	of this adapter, please see http://gatos.sf.net.
 [   139.914] (--) MACH64(0): Internal RAMDAC (subtype 1) detected.
 [   139.914] (==) MACH64(0): RGB weight 888
 [   139.914] (==) MACH64(0): Default visual is TrueColor
 [   139.915] (==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
 [   139.915] (II) MACH64(0): Using Mach64 accelerator CRTC.
 [   139.915] (!!) MACH64(0): Invalid horizontal sync pulse timing
 detected in mode on server entry.
 [   139.915] (--) MACH64(0): 1024x768 panel (ID 0) detected.
 [   139.915] (--) MACH64(0): Panel clock is 0.000 MHz.
 [   139.915] (II) MACH64(0): Using digital flat panel interface.
 [   139.915] (II) MACH64(0): Storing hardware cursor image at 0x817FFC00.
 [   139.915] (II) MACH64(0): Using 8 MB linear aperture at 0x81800000.
 [   139.915] (!!) MACH64(0): Virtual resolutions will be limited to 8191 kB
  due to linear aperture size and/or placement of hardware cursor image area.
 [   139.915] (II) MACH64(0): Using Block 0 MMIO aperture at 0x80881400.
 [   139.915] (II) MACH64(0): Using Block 1 MMIO aperture at 0x80881000.
 [   139.930] (II) MACH64(0): MMIO write caching enabled.
 [   139.930] (--) MACH64(0): 8192 kB of SDRAM (1:1) detected (using 8191
 kB).
 [   139.930] (WW) MACH64(0): Cannot shadow an accelerated frame buffer.
 [   139.930] (II) MACH64(0): Engine XCLK 47.727 MHz;  Refresh rate code 6.
 [   139.940] (--) MACH64(0): Internal programmable clock generator detected.
 [   139.940] (--) MACH64(0): Reference clock 157.5/11 (14.318) MHz.
 [   139.940] (WW) MACH64(0): Unable to estimate virtual size
 [   139.940] (II) MACH64(0): Maximum clock:  95.00 MHz
 [   139.940] (II) MACH64(0): Not using default mode "1152x864" (bad mode
 clock/interlace/doublescan)
 [   139.941] (II) MACH64(0): Not using default mode "576x432" (exceeds
 panel dimensions)
 [   139.941] (II) MACH64(0): Not using default mode "1280x960" (bad mode
 clock/interlace/doublescan)
 [   139.941] (II) MACH64(0): Not using default mode "640x480" (exceeds
 panel dimensions)
 [   139.941] (II) MACH64(0): Not using default mode "1280x960" (bad mode
 clock/interlace/doublescan)
 [   139.941] (II) MACH64(0): Not using default mode "640x480" (exceeds
 panel dimensions)
 [   139.941] (II) MACH64(0): Not using default mode "1280x1024" (bad
 mode clock/interlace/doublescan)
 [   139.941] (II) MACH64(0): Not using default mode "640x512" (exceeds
 panel dimensions)
 [   139.941] (II) MACH64(0): Not using default mode "1280x1024" (bad
 mode clock/interlace/doublescan)
 [   139.941] (II) MACH64(0): Not using default mode "640x512" (exceeds
 panel dimensions)
 [   139.941] (II) MACH64(0): Not using default mode "1280x1024" (bad
 mode clock/interlace/doublescan)
 [   139.941] (II) MACH64(0): Not using default mode "640x512" (exceeds
 panel dimensions)
 [   139.941] (II) MACH64(0): Not using default mode "1600x1200" (bad
 mode clock/interlace/doublescan)
 [   139.941] (II) MACH64(0): Not using default mode "800x600" (exceeds
 panel dimensions)
 [   139.941] (II) MACH64(0): Not using default mode "1600x1200" (bad
 mode clock/interlace/doublescan)
 [   139.941] (II) MACH64(0): Not using default mode "800x600" (exceeds
 panel dimensions)
 [   139.941] (II) MACH64(0): Not using default mode "1600x1200" (bad
 mode clock/interlace/doublescan)
 [   139.942] (II) MACH64(0): Not using default mode "800x600" (exceeds
 panel dimensions)
 [   139.942] (II) MACH64(0): Not using default mode "1600x1200" (bad
 mode clock/interlace/doublescan)
 [   139.942] (II) MACH64(0): Not using default mode "800x600" (bad mode
 clock/interlace/doublescan)
 [   139.942] (II) MACH64(0): Not using default mode "1600x1200" (bad
 mode clock/interlace/doublescan)
 [   139.942] (II) MACH64(0): Not using default mode "800x600" (bad mode
 clock/interlace/doublescan)
 [   139.942] (II) MACH64(0): Not using default mode "1792x1344"
 (insufficient memory for mode)
 [   139.942] (II) MACH64(0): Not using default mode "896x672" (bad mode
 clock/interlace/doublescan)
 [   139.942] (II) MACH64(0): Not using default mode "1792x1344"
 (insufficient memory for mode)
 [   139.942] (II) MACH64(0): Not using default mode "896x672" (bad mode
 clock/interlace/doublescan)
 [   139.942] (II) MACH64(0): Not using default mode "1856x1392"
 (insufficient memory for mode)
 [   139.942] (II) MACH64(0): Not using default mode "928x696" (bad mode
 clock/interlace/doublescan)
 [   139.942] (II) MACH64(0): Not using default mode "1856x1392"
 (insufficient memory for mode)
 [   139.942] (II) MACH64(0): Not using default mode "928x696" (bad mode
 clock/interlace/doublescan)
 [   139.942] (II) MACH64(0): Not using default mode "1920x1440"
 (insufficient memory for mode)
 [   139.943] (II) MACH64(0): Not using default mode "960x720" (bad mode
 clock/interlace/doublescan)
 [   139.943] (II) MACH64(0): Not using default mode "1920x1440"
 (insufficient memory for mode)
 [   139.943] (II) MACH64(0): Not using default mode "960x720" (bad mode
 clock/interlace/doublescan)
 [   139.943] (II) MACH64(0): Not using default mode "1400x1050" (bad
 mode clock/interlace/doublescan)
 [   139.943] (II) MACH64(0): Not using default mode "700x525" (exceeds
 panel dimensions)
 [   139.943] (II) MACH64(0): Not using default mode "1400x1050" (bad
 mode clock/interlace/doublescan)
 [   139.943] (II) MACH64(0): Not using default mode "700x525" (exceeds
 panel dimensions)
 [   139.943] (II) MACH64(0): Not using default mode "1920x1440"
 (insufficient memory for mode)
 [   139.943] (II) MACH64(0): Not using default mode "960x720" (bad mode
 clock/interlace/doublescan)
 [   139.943] (II) MACH64(0): Not using default mode "2048x1536"
 (insufficient memory for mode)
 [   139.943] (II) MACH64(0): Not using default mode "1024x768" (bad mode
 clock/interlace/doublescan)
 [   139.943] (II) MACH64(0): Not using default mode "2048x1536"
 (insufficient memory for mode)
 [   139.943] (II) MACH64(0): Not using default mode "1024x768" (bad mode
 clock/interlace/doublescan)
 [   139.943] (II) MACH64(0): Not using default mode "2048x1536"
 (insufficient memory for mode)
 [   139.943] (II) MACH64(0): Not using default mode "1024x768" (bad mode
 clock/interlace/doublescan)
 [   139.944] (II) MACH64(0): Not using mode "1024x768i" (no mode of this
 name)
 [   139.944] (II) MACH64(0): Not using mode "1024x768" (no mode of this
 name)
 [   139.944] (II) MACH64(0): Not using mode "832x624" (no mode of this name)
 [   139.944] (II) MACH64(0): Not using mode "800x600" (no mode of this name)
 [   139.944] (II) MACH64(0): Not using mode "640x480" (no mode of this name)
 [   139.944] (II) MACH64(0): Not using mode "720x400" (no mode of this name)
 [   139.944] (II) MACH64(0): Not using mode "640x400" (no mode of this name)
 [   139.944] (II) MACH64(0): Not using mode "640x350" (no mode of this name)
 [   139.944] (II) MACH64(0): Not using mode "512x384i" (no mode of this
 name)
 [   139.944] (II) MACH64(0): Not using mode "512x384" (no mode of this name)
 [   139.944] (II) MACH64(0): Not using mode "416x312" (no mode of this name)
 [   139.944] (II) MACH64(0): Not using mode "400x300" (no mode of this name)
 [   139.945] (II) MACH64(0): Not using mode "320x240" (no mode of this name)
 [   139.945] (II) MACH64(0): Not using mode "360x200" (no mode of this name)
 [   139.945] (II) MACH64(0): Not using mode "320x200" (no mode of this name)
 [   139.945] (II) MACH64(0): Not using mode "320x175" (no mode of this name)
 [   139.959] (II) UnloadModule: "mach64"
 [   139.959] (EE) Screen(s) found, but none have a usable configuration.
 [   139.959] (EE)
 Fatal server error:
 [   139.959] (EE) no screens found(EE)
 [   139.960] (EE)
 Please consult the The X.Org Foundation support
 
 Sevan
Prev by Date: Re: kern/53037 (tunnel mode for gif(4) manpage)
Next by Date: PR/53037 CVS commit: src/share/man/man4
Previous by Thread: Re: port-macppc/40232: machfb on Imac G3 333mhz does not work
Next by Thread: Re: port-atari/39965 ("lock error" panic on install with Atari TT030)
Indexes:
Home | Main Index | Thread Index | Old Index