misc/52844: ugreen USB/Ethernet adapter disconnecting of Internet when trying to fetch a pkg

[adrien_fernandes2%hotmail.com@localhost]

>Number:         52844
>Category:       misc
>Synopsis:       ugreen USB/Ethernet adapter disconnecting of Internet when trying to fetch a pkg
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    misc-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Dec 20 18:00:00 +0000 2017
>Originator:     Adrien Fernandes
>Release:        pkgsrc 16th december 2017
>Organization:
>Environment:
NetBSD 8.99.9 (GENERIC) amd64
>Description:
I just bought an ugreen USB to Ethernet adapter because my Dell Inspiron isn't providing an Ethernet interface.
When I connect it, it appears in dmesg correctly :

# dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.99.9 (GENERIC) #0: Tue Dec 19 09:15:23 UTC 2017
        mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 7964 MB
avail memory = 7710 MB
cpu_rng: RDSEED
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Inspiron 13-5378
mainbus0 (root)
ACPI: RSDP 0x00000000000EE9A0 000024 (v02 DELL  )
ACPI: XSDT 0x00000000A89240B0 0000E4 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: FACP 0x00000000A8947BA8 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
ACPI: DSDT 0x00000000A8924228 02397E (v02 DELL   CBX3     01072009 INTL 20160422)
ACPI: FACS 0x00000000A8FF0F80 000040
ACPI: APIC 0x00000000A8947CB8 000084 (v03 DELL   CBX3     01072009 AMI  00010013)
ACPI: FPDT 0x00000000A8947D40 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: FIDT 0x00000000A8947D88 00009C (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: MCFG 0x00000000A8947E28 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
ACPI: HPET 0x00000000A8947E68 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
ACPI: SSDT 0x00000000A8947EA0 00043E (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: BOOT 0x00000000A89482E0 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: SSDT 0x00000000A8948308 0012EB (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
ACPI: HPET 0x00000000A89495F8 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
ACPI: SSDT 0x00000000A8949630 000B04 (v02 INTEL  xh_OEMBD 00000000 INTL 20160422)
ACPI: UEFI 0x00000000A894A138 000042 (v01                 00000000      00000000)
ACPI: SSDT 0x00000000A894A180 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
ACPI: LPIT 0x00000000A894B060 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
ACPI: WSMT 0x00000000A894B0F8 000028 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000A894B120 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x00000000A894B3C0 000E3F (v02 INTEL  PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x00000000A894C200 000034 (v01 INTEL           00000002 MSFT 0000005F)
ACPI: DBG2 0x00000000A894C238 000061 (v00 INTEL           00000002 MSFT 0000005F)
ACPI: MSDM 0x00000000A894C2A0 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
ACPI: SSDT 0x00000000A894C2F8 003E66 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
ACPI: SLIC 0x00000000A8950160 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
ACPI: DMAR 0x00000000A89502D8 0000F0 (v01 INTEL  KBL      00000001 INTL 00000001)
ACPI: TPM2 0x00000000A89503C8 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
ACPI: Executed 23 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 8 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, id 0x806e9
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, id 0x806e9
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, id 0x806e9
cpu2: package 0, core 0, smt 1
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, id 0x806e9
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20171110
acpi0: X/RSDT: OemId <DELL  , CBX3   ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4024D5F7010 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E4E4810 0006B4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E4E4010 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4024D611390 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
acpiec0 at acpi0 (ECDV, PNP0C09-0): io 0x930,0x934
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [5-38,40-43,45-47,49-50,52-53,55,57,59-60,62,64,66,68,70,72,74,77,79-81,84,86,89,92,95,97,100]
acpiout2 at acpivga0 (DVI, 0x0302): ACPI Display Output Device
acpiout3 at acpivga0 (DVI2, 0x0303): ACPI Display Output Device
acpiout4 at acpivga0 (DVI3, 0x0304): ACPI Display Output Device
acpiout5 at acpivga0 (DP, 0x0300): ACPI Display Output Device
acpiout6 at acpivga0 (DP2, 0x0301): ACPI Display Output Device
acpiout7 at acpivga0 (DP3, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
acpivga0: unknown output device acpiout8
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0
acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0
acpivga0:   0x0302 (acpiout2): Unknown Output Device, head 0
acpivga0:   0x0303 (acpiout3): Unknown Output Device, head 0
acpivga0:   0x0300 (acpiout5): Unknown Output Device, head 0
acpivga0:   0x0301 (acpiout6): Unknown Output Device, head 0
acpivga0:   0x0304 (acpiout4): Unknown Output Device, head 0
acpivga0:   0x0305 (acpiout7): Unknown Output Device, head 0
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
BIND (INT33D2) at acpi0 not configured
CIND (INT33D3) at acpi0 not configured
DIND (INT33D4) at acpi0 not configured
VGBI (INT33D6) at acpi0 not configured
TSKN (INT3403) at acpi0 not configured
pckbc1 at acpi0 (PS2K, DLLK0740) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0609) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
IOTR (PNP0C02) at acpi0 not configured
GPI0 (INT344B) at acpi0 not configured
TPD0 (DELL0740) at acpi0 not configured
UA02 (PNP0C02) at acpi0 not configured
TMEM (INT3402) at acpi0 not configured
PEPD (INT33A1) at acpi0 not configured
TPM (MSFT0101) at acpi0 not configured
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings version 1
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Samsung SDI LION rechargeable battery
acpibat0: granularity: low->warn 0.036 Ah, warn->full 0.036 Ah
HIDD (INT33D5) at acpi0 not configured
PTID (INT340E) at acpi0 not configured
IETM (INT3400) at acpi0 not configured
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 107.0 C, passive cooling
SHAD (INT33D0) at acpi0 not configured
ACPI: Enabled 6 GPEs in block 00 to 7F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 8.2
pms0: Extended W mode, Palm detect, One button click pad, Multi-finger Report, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 5904 (rev. 0x02)
vga0 at pci0 dev 2 function 0: vendor 8086 product 5916 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 8086 product 1903 (miscellaneous DASP, revision 0x02) at pci0 dev 4 function 0 not configured
vendor 8086 product 9d35 (miscellaneous prehistoric, revision 0x21) at pci0 dev 19 function 0 not configured
xhci0 at pci0 dev 20 function 0: vendor 8086 product 9d2f (rev. 0x21)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 9d31 (miscellaneous DASP, revision 0x21) at pci0 dev 20 function 2 not configured
dwiic0 at pci0 dev 21 function 0status 0x100002
reset 0xffffffff
rlo 0xffffffff
rho 0xffffffff
: I2C controller instance 0
dwiic0: interrupting at ioapic0 pin 16
ACPI Warning: \_SB.PCI0.I2C0.TPD0._DSM: Insufficient arguments - Caller passed 3, ACPI requires 4 (20171110/nsarguments-309)
status 0x100002
reset 0x3
rlo 0xd1037004
rho 0x0
iic0 at dwiic0: I2C bus
ihidev0 at iic0 addr 0x2c: vendor 0x6cb product 0x7e7e, DELL0740
ihidev0: 14 report ids
ihidev0: interrupting at irq 51
ims0 at ihidev0 reportid 2: 2 buttons
wsmouse1 at ims0 mux 0
hid at ihidev0 reportid 3 not configured
hid at ihidev0 reportid 4 not configured
hid at ihidev0 reportid 6 not configured
hid at ihidev0 reportid 7 not configured
hid at ihidev0 reportid 8 not configured
hid at ihidev0 reportid 9 not configured
hid at ihidev0 reportid 10 not configured
hid at ihidev0 reportid 11 not configured
hid at ihidev0 reportid 12 not configured
hid at ihidev0 reportid 13 not configured
hid at ihidev0 reportid 14 not configured
dwiic1 at pci0 dev 21 function 1status 0x100002
reset 0xffffffff
rlo 0xffffffff
rho 0xffffffff
: I2C controller instance 1
dwiic1: interrupting at ioapic0 pin 17
status 0x100002
reset 0x3
rlo 0xd1036004
rho 0x0
iic1 at dwiic1: I2C bus
vendor 8086 product 9d3a (miscellaneous communications, revision 0x21) at pci0 dev 22 function 0 not configured
ahcisata0 at pci0 dev 23 function 0: vendor 8086 product 9d03 (rev. 0x21)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 0xcf34ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
pcib0 at pci0 dev 31 function 0: vendor 8086 product 9d58 (rev. 0x21)
vendor 8086 product 9d21 (miscellaneous memory, revision 0x21) at pci0 dev 31 function 2 not configured
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0225
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: vendor 8086 product 280b
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ichsmb0 at pci0 dev 31 function 4: vendor 8086 product 9d23 (rev. 0x21)
ichsmb0: interrupting at ioapic0 pin 16
iic2 at ichsmb0: I2C bus
isa0 at pcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat 151 us, pow   200 mW
acpicpu0: C3: FFH, lat 1034 us, pow   200 mW
acpicpu0: P0: FFH, lat  10 us, pow 15000 mW, 2601 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 14236 mW, 2600 MHz
acpicpu0: P2: FFH, lat  10 us, pow 13487 mW, 2500 MHz
acpicpu0: P3: FFH, lat  10 us, pow 12752 mW, 2400 MHz
acpicpu0: P4: FFH, lat  10 us, pow 11467 mW, 2200 MHz
acpicpu0: P5: FFH, lat  10 us, pow 10234 mW, 2000 MHz
acpicpu0: P6: FFH, lat  10 us, pow  9566 mW, 1900 MHz
acpicpu0: P7: FFH, lat  10 us, pow  8271 mW, 1700 MHz
acpicpu0: P8: FFH, lat  10 us, pow  7163 mW, 1500 MHz
acpicpu0: P9: FFH, lat  10 us, pow  6561 mW, 1400 MHz
acpicpu0: P10: FFH, lat  10 us, pow  5522 mW, 1200 MHz
acpicpu0: P11: FFH, lat  10 us, pow  4957 mW, 1100 MHz
acpicpu0: P12: FFH, lat  10 us, pow  3461 mW,  800 MHz
acpicpu0: P13: FFH, lat  10 us, pow  2945 mW,  700 MHz
acpicpu0: P14: FFH, lat  10 us, pow  2559 mW,  600 MHz
acpicpu0: P15: FFH, lat  10 us, pow  1586 mW,  400 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2712597920 Hz quality 3000
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 12 ports with 12 removable, self powered
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: PHY offline
axen0 at uhub0 port 1
axen0: ASIX Elec. Corp. (0xb95) AX88179 (0x1790), rev 3.00/1.00, addr 1
wd0 at atabus0 drive 0
wd0: <SK hynix SC311 SATA 256GB>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uvideo0 at uhub1 port 5 configuration 1 interface 0: CN0JCXG07248775LA15MA00 (0xbda) Integrated_Webcam_HD (0x58c2), rev 2.00/62.02, addr 2
video0 at uvideo0: CN0JCXG07248775LA15MA00 (0xbda) Integrated_Webcam_HD (0x58c2), rev 2.00/62.02, addr 2
axen0: AX88179
axen0: Ethernet address 00:0e:c6:db:e0:bb
rgephy0 at axen0 phy 3: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
uhidev0 at uhub1 port 7 configuration 1 interface 0
uhidev0: Raydium Corporation (0x2386) Raydium Touch System (0x3111), rev 2.01/0.00, addr 3, iclass 3/0
uhidev0: 68 report ids
uhid0 at uhidev0 reportid 1: input=0, output=63, feature=0
uhid1 at uhidev0 reportid 2: input=63, output=0, feature=0
uhid2 at uhidev0 reportid 3: input=0, output=63, feature=0
uhid3 at uhidev0 reportid 4: input=0, output=63, feature=0
uhid4 at uhidev0 reportid 5: input=0, output=63, feature=0
uhid5 at uhidev0 reportid 6: input=63, output=0, feature=0
uhid6 at uhidev0 reportid 7: input=0, output=63, feature=0
uhid7 at uhidev0 reportid 8: input=0, output=63, feature=0
uhid8 at uhidev0 reportid 9: input=63, output=0, feature=0
uts0 at uhidev0 reportid 10uts0: touchscreen has no range report
uhid9 at uhidev0 reportid 11: input=0, output=0, feature=1
uhid10 at uhidev0 reportid 68: input=0, output=0, feature=256
WARNING: 3 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.9/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

I can set it without trouble, the name of the interface is "axen0" and it works correctly, I can ping 8.8.8.8 with 20 ms, it's cool.
But, when I try to build a package, it will come to fetch the package and SUDDENTLY I lost any connection I had with Internet.

# make fetch
=> Bootstrap dependency digest>=20010302: found digest-20160304
=> Fetching libvorbis-1.3.5.tar.xz
=> Total size: 1193144 bytes
Requesting http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.5.tar.xz

Voila, it stops there and, if I'm in SSH, putty will simply freeze on this point, no CTRL + C available, It's just waiting for any signal from my NetBSD until putty says "there's no connection anymore with the machine, get out now" and close the SSH window.

No error message from NetBSD, ifconfig still sees my axen0 interface, still says it's "UP", it stills sees my static IP I set, nothing new in dmesg, everything seems to be all right but ping 8.8.8.8 is displaying nothing, it just freeze (it doesn't say no network found or anything) as if it was waiting, I can't ping my gate either, I can only ping the loopback address.

I tried everything to get my network back without to reboot (yes, because reboot works, I'll have Internet until I want to fetch a package). I set my interface to down then up, disconnected my USB to plug it in again, nothing special except that it detects the interface "normally" as it should.

It's a USB3.0 thing but I have no idea if I'm using USB 2 or 3 ports since there's no color on my USB ports and I don't know if it has an impact. The adapter is working correctly on Windows 10.
>How-To-Repeat:
Fetch a package using ugreen 10/100/1000 USB3.0 adpater
>Fix: