kern/52767: The wm driver cannot receive traffic on i82583V (rev. 0x00)

[Shinichi Doyashiki <clare%csel.org@localhost>]

>Number:         52767
>Category:       kern
>Synopsis:       The wm driver cannot receive traffic on i82583V (rev. 0x00)
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Nov 28 04:35:00 +0000 2017
>Originator:     Shinichi Doyashiki
>Release:        NetBSD 8.99.7
>Organization:
	at home
>Environment:
System: NetBSD router.csel.org 8.99.7 NetBSD 8.99.7 (GENERIC) #2: Fri Nov 24 07:07:41 JST 2017 clare%inner.csel.org@localhost:/export/stage/hack/src/sys/arch/amd64/compile/obj.amd64/GENERIC amd64
Architecture: x86_64
Machine: amd64
>Description:
	The wm driver cannot receive traffic on i82583V (rev. 0x00)
	on some type of machine.  The machine I used:
	http://www.xcyminipc.com/product/showproduct.php?lang=en&id=68

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.99.7 (GENERIC) #2: Fri Nov 24 07:07:41 JST 2017
	clare%inner.csel.org@localhost:/export/stage/hack/src/sys/arch/amd64/compile/obj.amd64/GENERIC
total memory = 3989 MB
avail memory = 3851 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To be filled by O.E.M. To be filled by O.E.M. (To be filled by O.E.M.)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DA988070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DA9919A0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000DA988160 00983E (v02 ALASKA A M I    00000026 INTL 20051117)
ACPI: FACS 0x00000000DAC20080 000040
ACPI: APIC 0x00000000DA991AB0 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DA991B18 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000DA991B60 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: HPET 0x00000000DA991BA0 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DA991BD8 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DA991EF0 000B22 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 3 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz, id 0x306a9
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz, id 0x306a9
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20171110
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
Firmware Error (ACPI): Failure looking up [\_PR.CPU0._PPC], AE_NOT_FOUND (20171110/psargs-395)
ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_NOT_FOUND (20171110/psparse-569)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010714F610 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout0: brightness levels: [0-100]
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0-100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout2: brightness levels: [0-100]
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout3: brightness levels: [0-100]
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout4: brightness levels: [0-100]
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout5: brightness levels: [0-100]
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout6: brightness levels: [0-100]
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout7: brightness levels: [0-100]
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0
PDRC (PNP0C02) at acpi0 not configured
MEM2 (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 87.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 106.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1
acpitz1: levels: critical 106.0 C, passive 106.0 C, passive cooling
ACPI: Enabled 5 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0154 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0156 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800065db3000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 8086 product 2806
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: DP01 8ch: Digital Out [Jack]
hdafg0: DP02 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 1e10 (rev. 0xc4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci1 dev 0 function 0: Intel i82583V (rev. 0x00)
wm0: for TX and RX interrupting at msix2 vec 0 affinity to 1
wm0: for LINK interrupting at msix2 vec 1
wm0: PCI-Express bus
wm0: 512 words (8 address bits) SPI EEPROM, version 1.10.0, Image Unique ID ffffffff
wm0: Ethernet address 0c:e8:5c:**:**:**
wm0: 0x2a4440<SPI,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy0 at wm0 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 8086 product 1e12 (rev. 0xc4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci2 dev 0 function 0: Intel i82583V (rev. 0x00)
wm1: for TX and RX interrupting at msix3 vec 0 affinity to 1
wm1: for LINK interrupting at msix3 vec 1
wm1: PCI-Express bus
wm1: 512 words (8 address bits) SPI EEPROM, version 1.10.0, Image Unique ID ffffffff
wm1: Ethernet address 0c:e8:5c:**:**:**
wm1: 0x2a4440<SPI,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy1 at wm1 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 8086 product 1e14 (rev. 0xc4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci3 dev 0 function 0: Intel i82583V (rev. 0x00)
wm2: for TX and RX interrupting at msix4 vec 0 affinity to 1
wm2: for LINK interrupting at msix4 vec 1
wm2: PCI-Express bus
wm2: 512 words (8 address bits) SPI EEPROM, version 1.10.0, Image Unique ID ffffffff
wm2: Ethernet address 0c:e8:5c:**:**:**
wm2: 0x2a4440<SPI,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy2 at wm2 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 3: vendor 8086 product 1e16 (rev. 0xc4)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
wm3 at pci4 dev 0 function 0: Intel i82583V (rev. 0x00)
wm3: for TX and RX interrupting at msix5 vec 0 affinity to 1
wm3: for LINK interrupting at msix5 vec 1
wm3: PCI-Express bus
wm3: 512 words (8 address bits) SPI EEPROM, version 1.10.0, Image Unique ID ffffffff
wm3: Ethernet address 0c:e8:5c:**:**:**
wm3: 0x2a4440<SPI,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy3 at wm3 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci0 dev 28 function 4: vendor 8086 product 1e18 (rev. 0xc4)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
wm4 at pci5 dev 0 function 0: Intel i82583V (rev. 0x00)
wm4: for TX and RX interrupting at msix6 vec 0 affinity to 1
wm4: for LINK interrupting at msix6 vec 1
wm4: PCI-Express bus
wm4: 512 words (8 address bits) SPI EEPROM, version 1.10.0, Image Unique ID ffffffff
wm4: Ethernet address 0c:e8:5c:**:**:**
wm4: 0x2a4440<SPI,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy4 at wm4 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb5 at pci0 dev 28 function 5: vendor 8086 product 1e1a (rev. 0xc4)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb5: link is x1 @ 2.5GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
wm5 at pci6 dev 0 function 0: Intel i82583V (rev. 0x00)
wm5: for TX and RX interrupting at msix7 vec 0 affinity to 1
wm5: for LINK interrupting at msix7 vec 1
wm5: PCI-Express bus
wm5: 512 words (8 address bits) SPI EEPROM, version 1.10.0, Image Unique ID ffffffff
wm5: Ethernet address 0c:e8:5c:**:**:**
wm5: 0x2a4440<SPI,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy5 at wm5 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e55 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE40108551010 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
DRM error in cpt_serr_int_handler: PCH transcoder A FIFO underrun
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1796087600 Hz quality 3000
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p on, RC6pp off
wd0 at atabus0 drive 0
wd0: <SanDisk SDMSATA256G>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uhub4 at uhub0 port 1: VIA Labs, Inc. (0x2109) USB3.0 Hub (0x812), class 9/0, rev 3.00/91.01, addr 1
uhub4: 4 ports with 4 removable, self powered
uhub5 at uhub1 port 1: VIA Labs, Inc. (0x2109) USB2.0 Hub (0x2812), class 9/0, rev 2.10/91.00, addr 2
uhub5: single transaction translator
uhub5: 4 ports with 4 removable, self powered
uhub6 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub6: single transaction translator
uhub7 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub7: single transaction translator
uhub7: 6 ports with 6 removable, self powered
uhub6: 8 ports with 8 removable, self powered
uhidev0 at uhub5 port 2 configuration 1 interface 0
uhidev0: Cypress (0x4b4) Cypress USB Keyboard / PS2 Mouse (0x101), rev 1.10/0.01, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
axen0 at uhub4 port 1
axen0: ASIX Elec. Corp. (0xb95) AX88179 (0x1790), rev 3.00/1.00, addr 4
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub5 port 2 configuration 1 interface 1
uhidev1: Cypress (0x4b4) Cypress USB Keyboard / PS2 Mouse (0x101), rev 1.10/0.01, addr 3, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
axen0: AX88179
axen0: Ethernet address 34:76:c5:**:**:**
rgephy0 at axen0 phy 3: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
aue0 at uhub5 port 3
aue0: corega (0x7aa) corega FEther USB-TX (0x04), rev 1.10/1.01, addr 5
aue0: Ethernet address 00:90:99:**:**:**
acphy0 at aue0 phy 1: AC101 10/100 media interface, rev. 11
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhidev2 at uhub5 port 4 configuration 1 interface 0
uhidev2: Logitech (0x62a) USB WheelMouse (0x252), rev 1.10/0.00, addr 6, iclass 3/1
ums1 at uhidev2: 3 buttons, W and Z dirs
wsmouse1 at ums1 mux 0
WARNING: 8 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.7/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)

>How-To-Repeat:
	Get the machine, install NetBSD, and ping/tcpdump on it.
>Fix:
	I have no idea.