NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
kern/52731: Lenovo T500 hangs initialising 2nd GPU if switchable graphics is enabled
>Number: 52731
>Category: kern
>Synopsis: Lenovo T500 hangs initialising 2nd GPU if switchable graphics is enabled
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Fri Nov 17 12:45:00 +0000 2017
>Originator: Stephen Borrill
>Release: 8.99.7
>Organization:
>Environment:
NetBSD 8.99.7 (GENERIC) #0: Thu Nov 16 14:28:19 UTC 2017 amd64
>Description:
The T500 has separate radeon (discrete) and intel (integrated) GPUs. If the BIOS is set to use "discrete" or "integrated" it is fine, but if the default of "switchable" it will hang when trying to initialise the radeon.
Specifically, the intel chipset is initialised very early on (as determined by when it switches from VGA to full res framebuffer). The radeon is the last device to be initialised (it happens after disks have been probed, etc.).
dmesg from discrete graphics:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.7 (GENERIC) #0: Thu Nov 16 14:28:19 UTC 2017
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8122 MB
avail memory = 7863 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 20828WG (ThinkPad T500)
mainbus0 (root)
ACPI: RSDP 0x00000000000F6440 000024 (v02 LENOVO)
ACPI: XSDT 0x000000009FD49BE2 000094 (v01 LENOVO TP-7V 00003250 LTP 00000000)
ACPI: FACP 0x000000009FD49D00 0000F4 (v03 LENOVO TP-7V 00003250 LNVO 00000001)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20171110/tbfadt-642)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20171110/tbfadt-745)
ACPI: DSDT 0x000000009FD4A10E 00FB01 (v01 LENOVO TP-7V 00003250 MSFT 03000000)
ACPI: FACS 0x000000009FD8E000 000040
ACPI: SSDT 0x000000009FD49EB4 00025A (v01 LENOVO TP-7V 00003250 MSFT 03000000)
ACPI: ECDT 0x000000009FD59C0F 000052 (v01 LENOVO TP-7V 00003250 LNVO 00000001)
ACPI: APIC 0x000000009FD59C61 000078 (v01 LENOVO TP-7V 00003250 LNVO 00000001)
ACPI: MCFG 0x000000009FD59CD9 00003C (v01 LENOVO TP-7V 00003250 LNVO 00000001)
ACPI: HPET 0x000000009FD59D15 000038 (v01 LENOVO TP-7V 00003250 LNVO 00000001)
ACPI: SLIC 0x000000009FD59E62 000176 (v01 LENOVO TP-7V 00003250 LTP 00000000)
ACPI: BOOT 0x000000009FD59FD8 000028 (v01 LENOVO TP-7V 00003250 LTP 00000001)
ACPI: SSDT 0x000000009FD8D1FA 000568 (v01 LENOVO TP-7V 00003250 INTL 20050513)
ACPI: TCPA 0x000000009FB07000 000032 (v00 00000000 00000000)
ACPI: DMAR 0x000000009FB06000 0000C8 (v01 ? 00000001 00000000)
ACPI: SSDT 0x000000009FAD3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 0x000000009FAD2000 000274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x000000009FAD1000 000242 (v01 PmRef ApTst 00003000 INTL 20050624)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, id 0x1067a
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, id 0x1067a
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20171110
acpi0: X/RSDT: OemId <LENOVO,TP-7V ,00003250>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E757390 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E7F4010 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E7F6E10 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E7C6CB0 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
LPT (PNP0400) at acpi0 not configured
TPM (INTC0102) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0210): ACPI Display Output Device
acpiout3 at acpivga0 (DP0, 0x0220): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0: 0x0210 (acpiout2): Unknown Output Device, head 0
acpivga0: 0x0220 (acpiout3): Unknown Output Device, head 0
acpivga0: 0x0110 (acpiout0): LCD Panel, head 0
GDCK (IBM0079) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2a40 (rev. 0x07)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 2a41 (rev. 0x07)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 1002 product 9591 (rev. 0x00)
vendor 8086 product 2a44 (miscellaneous communications, revision 0x07) at pci0 dev 3 function 0 not configured
wm0 at pci0 dev 25 function 0: 82801I mobile LAN Controller (rev. 0x03)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address 00:22:68:10:12:fb
wm0: 0xa4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT>
makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm0: Previously assumed PHY read/write function was incorrect.
uhci0 at pci0 dev 26 function 0: vendor 8086 product 2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 8086 product 2939 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 14f1 product 5051
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: DAC02 2ch: Speaker [Built-In]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
hdvsmfg at hdaudio0 not configured
ppb1 at pci0 dev 28 function 0: vendor 8086 product 2940 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 8086 product 2942 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci3 dev 0 function 0: vendor 8086 product 4236 (rev. 0x00)
iwn0: interrupting at msi2 vec 0
iwn0: MIMO 3T3R, MoW, address 00:21:6a:4a:03:3a
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb3 at pci0 dev 28 function 3: vendor 8086 product 2946 (rev. 0x03)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: vendor 8086 product 2948 (rev. 0x03)
ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 13
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 8086 product 2934 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 16
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 8086 product 2935 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 17
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 8086 product 2936 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x93)
pci6 at ppb5 bus 21
pci6: i/o space, memory space enabled
cbb0 at pci6 dev 0 function 0: vendor 1180 product 0476 (rev. 0xba)
fwohci0 at pci6 dev 0 function 1: vendor 1180 product 0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:01:6c:20:00:ab:38:dd
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci6 dev 0 function 2: vendor 1180 product 0822 (rev. 0x21)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: SDHC 1.0, rev 4, SDMA, 33000 kHz, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
vendor 1180 product 0843 (miscellaneous system, revision 0x11) at pci6 dev 0 function 3 not configured
vendor 1180 product 0592 (miscellaneous system, revision 0x11) at pci6 dev 0 function 4 not configured
vendor 1180 product 0852 (miscellaneous system, revision 0x11) at pci6 dev 0 function 5 not configured
cbb0: cacheline 0x10 lattimer 0x20
cbb0: bhlc 0x822010
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2919 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2929 (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xef20ffa3<SXS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 57 us, pow 100 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2534 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2533 MHz
acpicpu0: P2: FFH, lat 10 us, pow 15000 mW, 1600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 12000 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 12000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 10500 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 9000 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 7500 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 6000 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 4500 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3000 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1500 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ehci0: handing over full speed device on port 3 to uhci1
wd0 at atabus0 drive 0
wd0: <Samsung SSD 840 EVO 1TB>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd1 at atabus1 drive 0
wd1: <WDC WD7500BPVT-00HXZT3>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 698 GB, 1453521 cyl, 16 head, 63 sec, 512 bytes/sect x 1465149168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
umass0 at uhub7 port 2 configuration 1 interface 0
umass0: Generic (0x58f) Mass Storage (0x6387), rev 2.00/1.12, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic, Flash Disk, 8.07> disk removable
sd0: fabricating a geometry
sd0: 7800 MB, 7800 cyl, 64 head, 32 sec, 512 bytes/sect x 15974400 sectors
sd0: fabricating a geometry
sd0: 13004800 trailing sectors not covered by disklabel
uhub8 at uhub3 port 5: vendor 04b3 (0x4b3) product 4485 (0x4485), class 9/0, rev 2.00/0.01, addr 2
uhub8: multiple transaction translators
uhub8: 4 ports with 4 removable, self powered
ugen0 at uhub1 port 1
ugen0: vendor 08ff (0x8ff) Fingerprint Sensor (0x2810), rev 2.00/17.03, addr 2
uhub9 at uhub8 port 3: ALCOR (0x58f) Generic USB Hub (0x9254), class 9/0, rev 1.10/3.12, addr 3
uhub9: 4 ports with 4 removable, self powered
uvideo0 at uhub3 port 6 configuration 1 interface 0: Chicony Electronics Co., Ltd. (0x17ef) product 4807 (0x4807), rev 2.00/31.34, addr 4
video0 at uvideo0: Chicony Electronics Co., Ltd. (0x17ef) product 4807 (0x4807), rev 2.00/31.34, addr 4
sd0: 13004800 trailing sectors not covered by disklabel
sd0: 13004800 trailing sectors not covered by disklabel
sd0: 13004800 trailing sectors not covered by disklabel
sd0: 13004800 trailing sectors not covered by disklabel
WARNING: 2 errors while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
sd0: 13004800 trailing sectors not covered by disklabel
root file system type: ffs
kern.module.path=/stand/amd64/8.99.7/modules
drm: initializing kernel modesetting (RV635 0x1002:0x9591 0x17AA:0x2117).
drm: register mmio base: 0xcfff0000
drm: register mmio size: 65536
drm kern info: ATOM BIOS: M86M
radeon0: info: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon0: info: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
drm: Detected VRAM RAM=100M, BAR=256M
drm: RAM width 128bits DDR
Zone kernel: Available graphics memory: 2593812 kiB
Zone dma32: Available graphics memory: 2097152 kiB
drm: radeon: 256M of VRAM memory ready
drm: radeon: 512M of GTT memory ready.
drm: Loading RV635 Microcode
drm: GART: num cpu pages 131072, num gpu pages 131072
drm: PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0x0xffff8000af3bcc00
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 16 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 1 usecs
drm: ib test on ring 0 succeeded in 0 usecs
drm: Radeon Display Connectors
drm: Connector 0:
drm: DVI-I-1
drm: HPD3
drm: DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
drm: Encoders:
drm: DFP1: INTERNAL_UNIPHY
drm: Connector 1:
drm: LVDS-1
drm: DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
drm: Encoders:
drm: LCD1: INTERNAL_KLDSCP_LVTMA
drm: Connector 2:
drm: DP-1
drm: HPD1
drm: DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
drm: Encoders:
drm: DFP2: INTERNAL_UNIPHY
drm: Connector 3:
drm: VGA-1
drm: DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
drm: Encoders:
drm: CRT1: INTERNAL_KLDSCP_DAC1
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff8000af5cd000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
dmesg from integrated graphics:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.7 (GENERIC) #0: Thu Nov 16 14:28:19 UTC 2017
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8086 MB
avail memory = 7828 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 20828WG (ThinkPad T500)
mainbus0 (root)
ACPI: RSDP 0x00000000000F6440 000024 (v02 LENOVO)
ACPI: XSDT 0x000000009D949BE2 000094 (v01 LENOVO TP-7V 00003250 LTP 00000000)
ACPI: FACP 0x000000009D949D00 0000F4 (v03 LENOVO TP-7V 00003250 LNVO 00000001)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20171110/tbfadt-642)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20171110/tbfadt-745)
ACPI: DSDT 0x000000009D94A10E 00FB01 (v01 LENOVO TP-7V 00003250 MSFT 03000000)
ACPI: FACS 0x000000009D98E000 000040
ACPI: SSDT 0x000000009D949EB4 00025A (v01 LENOVO TP-7V 00003250 MSFT 03000000)
ACPI: ECDT 0x000000009D959C0F 000052 (v01 LENOVO TP-7V 00003250 LNVO 00000001)
ACPI: APIC 0x000000009D959C61 000078 (v01 LENOVO TP-7V 00003250 LNVO 00000001)
ACPI: MCFG 0x000000009D959CD9 00003C (v01 LENOVO TP-7V 00003250 LNVO 00000001)
ACPI: HPET 0x000000009D959D15 000038 (v01 LENOVO TP-7V 00003250 LNVO 00000001)
ACPI: SLIC 0x000000009D959E62 000176 (v01 LENOVO TP-7V 00003250 LTP 00000000)
ACPI: BOOT 0x000000009D959FD8 000028 (v01 LENOVO TP-7V 00003250 LTP 00000001)
ACPI: SSDT 0x000000009D98D1FA 000568 (v01 LENOVO TP-7V 00003250 INTL 20050513)
ACPI: TCPA 0x000000009D707000 000032 (v00 00000000 00000000)
ACPI: DMAR 0x000000009D706000 000110 (v01 ? 00000001 00000000)
ACPI: SSDT 0x000000009D6D3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 0x000000009D6D2000 000274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x000000009D6D1000 000242 (v01 PmRef ApTst 00003000 INTL 20050624)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, id 0x1067a
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, id 0x1067a
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20171110
acpi0: X/RSDT: OemId <LENOVO,TP-7V ,00003250>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E64F390 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E6ED010 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E6EFE10 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E6BECB0 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
LPT (PNP0400) at acpi0 not configured
TPM (INTC0102) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: [20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
GDCK (IBM0079) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2a40 (rev. 0x07)
agp0 at pchb0: G4X-family chipset
agp0: detected 32252k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 2a42 (rev. 0x07)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff8000ad290000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 2a43 (miscellaneous display, revision 0x07) at pci0 dev 2 function 1 not configured
vendor 8086 product 2a44 (miscellaneous communications, revision 0x07) at pci0 dev 3 function 0 not configured
wm0 at pci0 dev 25 function 0: 82801I mobile LAN Controller (rev. 0x03)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address 00:22:68:10:12:fb
wm0: 0xa4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT>
makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm0: Previously assumed PHY read/write function was incorrect.
uhci0 at pci0 dev 26 function 0: vendor 8086 product 2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 8086 product 2939 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 14f1 product 5051
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: DAC02 2ch: Speaker [Built-In]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
hdvsmfg at hdaudio0 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 2940 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 2942 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 8086 product 4236 (rev. 0x00)
iwn0: interrupting at msi2 vec 0
iwn0: MIMO 3T3R, MoW, address 00:21:6a:4a:03:3a
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: vendor 8086 product 2946 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 4: vendor 8086 product 2948 (rev. 0x03)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 8086 product 2934 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 16
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 8086 product 2935 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 17
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 8086 product 2936 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x93)
pci5 at ppb4 bus 21
pci5: i/o space, memory space enabled
cbb0 at pci5 dev 0 function 0: vendor 1180 product 0476 (rev. 0xba)
fwohci0 at pci5 dev 0 function 1: vendor 1180 product 0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:01:6c:20:00:ab:38:dd
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci5 dev 0 function 2: vendor 1180 product 0822 (rev. 0x21)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: SDHC 1.0, rev 4, SDMA, 33000 kHz, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
vendor 1180 product 0843 (miscellaneous system, revision 0x11) at pci5 dev 0 function 3 not configured
vendor 1180 product 0592 (miscellaneous system, revision 0x11) at pci5 dev 0 function 4 not configured
vendor 1180 product 0852 (miscellaneous system, revision 0x11) at pci5 dev 0 function 5 not configured
cbb0: cacheline 0x10 lattimer 0x20
cbb0: bhlc 0x822010
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2919 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2929 (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xef20ffa3<SXS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 57 us, pow 100 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2534 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2533 MHz
acpicpu0: P2: FFH, lat 10 us, pow 15000 mW, 1600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 12000 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 12000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 10500 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 9000 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 7500 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 6000 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 4500 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3000 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1500 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ehci0: handing over full speed device on port 3 to uhci1
wd0 at atabus0 drive 0
wd0: <Samsung SSD 840 EVO 1TB>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd1 at atabus1 drive 0
wd1: <WDC WD7500BPVT-00HXZT3>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 698 GB, 1453521 cyl, 16 head, 63 sec, 512 bytes/sect x 1465149168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
umass0 at uhub7 port 2 configuration 1 interface 0
umass0: Generic (0x58f) Mass Storage (0x6387), rev 2.00/1.12, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic, Flash Disk, 8.07> disk removable
sd0: fabricating a geometry
sd0: 7800 MB, 7800 cyl, 64 head, 32 sec, 512 bytes/sect x 15974400 sectors
sd0: fabricating a geometry
sd0: 13004800 trailing sectors not covered by disklabel
uhub8 at uhub3 port 5: vendor 04b3 (0x4b3) product 4485 (0x4485), class 9/0, rev 2.00/0.01, addr 2
uhub8: multiple transaction translators
uhub8: 4 ports with 4 removable, self powered
ugen0 at uhub1 port 1
ugen0: vendor 08ff (0x8ff) Fingerprint Sensor (0x2810), rev 2.00/17.03, addr 2
uhub9 at uhub8 port 3: ALCOR (0x58f) Generic USB Hub (0x9254), class 9/0, rev 1.10/3.12, addr 3
uhub9: 4 ports with 4 removable, self powered
uvideo0 at uhub3 port 6 configuration 1 interface 0: Chicony Electronics Co., Ltd. (0x17ef) product 4807 (0x4807), rev 2.00/31.34, addr 4
video0 at uvideo0: Chicony Electronics Co., Ltd. (0x17ef) product 4807 (0x4807), rev 2.00/31.34, addr 4
sd0: 13004800 trailing sectors not covered by disklabel
sd0: 13004800 trailing sectors not covered by disklabel
sd0: 13004800 trailing sectors not covered by disklabel
sd0: 13004800 trailing sectors not covered by disklabel
WARNING: 5 errors while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
sd0: 13004800 trailing sectors not covered by disklabel
root file system type: ffs
kern.module.path=/stand/amd64/8.99.7/modules
>How-To-Repeat:
Boot a T500 (or probably any other device with switchable graphics) with the BIOS set to "switchable").
>Fix:
A workaround, not a fix, is to add the following to /boot.cfg:
userconf=disable radeon*
Home |
Main Index |
Thread Index |
Old Index