NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: kern/51057: hme(4) device driver bug when tcp4csum and udp4csum are enabled



The following reply was made to PR kern/51057; it has been noted by GNATS.

From: "John D. Baker" <jdbaker%mylinuxisp.com@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: kern/51057: hme(4) device driver bug when tcp4csum and udp4csum
 are enabled
Date: Sat, 9 Apr 2016 09:32:35 -0500 (CDT)

 I see something similar on a machine with a qfe (4 x hme) sbus card that
 I use as a NAT firewall/router.  Both internal and exteral networks are
 on the qfe card.  If "tcp4csum-rx" is enabled on the internal interface,
 FTP connections from the local LAN are not forwarded to 'ftp-proxy'.
 
 There was one remote machine I connected to that would drop the SSH
 connection with similar messages to those reported here, but it was
 the only one that exhibited the problem.
 
 Lately, I experienced one particular web site that starts to work then
 fails and, once failed, fails for all hosts on my internal LAN for a
 couple of days, including one running redmond-OS.  The webside works
 for hosts outside my LAN (via excruciatingly slow X11 forwarding over
 SSH).  I briefly disabled all tcp4csum for internal and external networks,
 but that didn't help.  I'll try again by rebooting the firewall so it
 comes up with those options disabled.
 
 -- 
 |/"\ John D. Baker, KN5UKS               NetBSD     Darwin/MacOS X
 |\ / jdbaker[snail]mylinuxisp[flyspeck]com    OpenBSD            FreeBSD
 | X  No HTML/proprietary data in email.   BSD just sits there and works!
 |/ \ GPGkeyID:  D703 4A7E 479F 63F8 D3F4  BD99 9572 8F23 E4AD 1645
 


Home | Main Index | Thread Index | Old Index