Re: port-arm32/50288 (NetBSD-7.0_RC3/evbarm-earmv7hf/binary/gzimg/armv7.img doesn't boot on BBB)

To: jmcneill%NetBSD.org@localhost, gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost, David.S.Alessio%gmail.com@localhost
Subject: Re: port-arm32/50288 (NetBSD-7.0_RC3/evbarm-earmv7hf/binary/gzimg/armv7.img doesn't boot on BBB)
From: "David S. Alessio" <david.s.alessio%gmail.com@localhost>
Date: Wed, 4 Nov 2015 16:50:01 +0000 (UTC)
The following reply was made to PR port-arm32/50288; it has been noted by GNATS.

From: "David S. Alessio" <david.s.alessio%gmail.com@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: jmcneill%NetBSD.org@localhost,
 port-arm32-maintainer%netbsd.org@localhost,
 netbsd-bugs%netbsd.org@localhost,
 gnats-admin%netbsd.org@localhost
Subject: Re: port-arm32/50288 (NetBSD-7.0_RC3/evbarm-earmv7hf/binary/gzimg/armv7.img doesn't boot on BBB)
Date: Wed, 4 Nov 2015 08:44:50 -0800

 --Apple-Mail=_17E302E5-2383-40B0-A7ED-99C61B29A523
 Content-Transfer-Encoding: quoted-printable
 Content-Type: text/plain;
 	charset=utf-8
 
 
 > On Nov 1, 2015, at 5:10 PM, jmcneill%NetBSD.org@localhost wrote:
 >=20
 > Synopsis: NetBSD-7.0_RC3/evbarm-earmv7hf/binary/gzimg/armv7.img =
 doesn't boot on BBB
 >=20
 > Responsible-Changed-From-To: port-arm32-maintainer->jmcneill
 > Responsible-Changed-By: jmcneill%NetBSD.org@localhost
 > Responsible-Changed-When: Mon, 02 Nov 2015 01:10:07 +0000
 > Responsible-Changed-Why:
 > Mine.
 >=20
 >=20
 > State-Changed-From-To: open->feedback
 > State-Changed-By: jmcneill%NetBSD.org@localhost
 > State-Changed-When: Mon, 02 Nov 2015 01:10:07 +0000
 > State-Changed-Why:
 > I checked in a fix to -current for the "edma errint!" problem: =
 http://mail-index.netbsd.org/source-changes/2015/11/01/msg069818.html
 >=20
 > Corresponding pullup request for netbsd-7: =
 http://releng.netbsd.org/cgi-bin/req-7.cgi?show=3D1017
 >=20
 > Are you able to apply this change to a netbsd-7 tree and see if it =
 fixes the issue for you?
 >=20
 
 Thanks for the prompt reply.  I tried =
 netbsd-7/201511031240Z/evbarm-earmv7hf/binary/gzimg/
 It fixes the =E2=80=9Cedma errint!=E2=80=9D issue, but fails to read =
 some sectors.  The log is attached.
 
 
 --Apple-Mail=_17E302E5-2383-40B0-A7ED-99C61B29A523
 Content-Disposition: attachment;
 	filename=bbb.log
 Content-Type: application/octet-stream;
 	name="bbb.log"
 Content-Transfer-Encoding: 7bit
 
 U-Boot# bootm
 ## Booting kernel from Legacy Image at 82000000 ...
    Image Name:   NetBSD/beagle 7.0_STABLE
    Image Type:   ARM NetBSD Kernel Image (uncompressed)
    Data Size:    3744896 Bytes = 3.6 MiB
    Load Address: 80300000
    Entry Point:  80300000
    Verifying Checksum ... OK
    Loading Kernel Image ... OK
 ## Transferring control to NetBSD stage-2 loader (at address 80300000) ...
 defgh
 uboot arg = 0x9f62afe0, 0, 0x9f79d9db, 0x9f79d9db
 [ Kernel symbol table missing! ]
 Loaded initial symtab at 0x8060597c, strtab at 0x8063786c, # entries 12045
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 7.0_STABLE (BEAGLEBONE.201511031240Z)
 total memory = 512 MB
 avail memory = 503 MB
 sysctl_createv: sysctl_create(machine_arch) returned 17
 kern.module.path=/stand/evbarm/7.0/modules
 timecounter: Timecounters tick every 10.000 msec
 mainbus0 (root)
 cpu0 at mainbus0 core 0: 1000 MHz Cortex-A8 r3p2 (Cortex V7A core)
 cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
 cpu0: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232031 [3]=0x11112131, [4]=0x11142, [5]=0
 cpu0: mmfr: [0]=0x1100003 [1]=0x20000000 [2]=0x1202000 [3]=0x211
 cpu0: pfr: [0]=0x1131 [1]=0x11
 cpu0: 32KB/64B 4-way L1 VIPT Instruction cache
 cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
 cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache
 vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
 vfp0: mvfr: [0]=0x11110222 [1]=0x11111
 obio0 at mainbus0 base 0x44000000-0x4fffffff: On-Board IO
 omapicu0 at obio0 addr 0x48200000-0x48200fff intrbase 0
 prcm0 at obio0 addr 0x44e00000-0x44e01fff: Power, Reset and Clock Management
 sitaracm0 at obio0 addr 0x44e10000-0x44e11fff: control module, rev 1.0
 edma0 at obio0 addr 0x49000000-0x490fffff intrbase 12
 gpmc0 at mainbus0 base 0x50000000: General Purpose Memory Controller, rev 6.0
 gpmc0: CS#0 valid, addr 0x08000000, size 256MB
 com0 at obio0 addr 0x44e09000-0x44e09fff intr 72: ns16550a, working fifo
 com0: console
 sdhc0 at obio0 addr 0x48060100-0x48060fff intr 64sdhc0: EDMA tx channel 24, rx channel 25
 : SDHC controller (EDMA)
 sdhc0: SD Host Specification 2.0, rev.49
 sdhc0: using DMA transfer
 sdmmc0 at sdhc0 slot 0
 sdhc1 at obio0 addr 0x481d8100-0x481d8fff intr 28sdhc1: EDMA tx channel 2, rx channel 3
 : SDHC controller (EDMA)
 sdhc1: SD Host Specification 2.0, rev.49
 sdhc1: using DMA transfer
 sdmmc1 at sdhc1 slot 0
 tiiic0 at obio0 addr 0x44e0b000-0x44e0bfff intr 70: rev 0.11
 iic0 at tiiic0: I2C bus
 seeprom0 at iic0 addr 0x50: AT24Cxx or compatible EEPROM: size 32768
 tps65217pmic0 at iic0 addr 0x24: TPS65217C Power Management Multi-Channel IC (rev 1.2)
 tps65217pmic0: power sources USB max 1800 mA, [AC] max 2500 mA
 tps65217pmic0: [LDO1: 1800 mV] [LDO2: 3300 mV] [LDO3: 1800 mV] [LDO4: 3300 mV] [DCDC1: 1500 mV] [DCD 
 omapdmtimer0 at obio0 addr 0x48040000-0x48040fff intr 68: DMTIMER2
 omapdmtimer1 at obio0 addr 0x44e31000-0x44e31fff intr 67: DMTIMER1ms
 omapdmtimer2 at obio0 addr 0x48044000-0x48044fff intr 92: DMTIMER4
 omapwdt32k0 at obio0 addr 0x44e35000-0x44e35fff: rev 0.1
 tiotg0 at obio0 addr 0x47400000-0x47404fff intrbase 17: TI dual-port USB controller: version v1.0.0.3
 motg0 at tiotg0 port 0: 0x4ea20800 version v0.0.0
 motg1 at tiotg0 port 1: 0x4ea20800 version v0.0.0
 motg1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
 usb0 at motg1: USB revision 2.0
 cpsw0 at obio0 addr 0x4a100000-0x4a107fff intrbase 40: TI CPSW Ethernet
 cpsw0: Ethernet address 6c:ec:eb:b0:18:46
 ukphy0 at cpsw0 phy 0WARNING: module error: vfs load failed for `miiverbose', error 45
 : OUI 0x00800f, model 0x000f, rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 trng0 at obio0 addr 0x48310000-0x48311fff intr 111
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "dmtimer" frequency 24000000 Hz quality 100
 uhub0 at usb0: Mentor Graphics MOTG root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 1 port with 1 removable, self powered
 ld0 at sdmmc0: <0x03:0x5344:SL32G:0x80:0x6acb6529:0x0f6>
 ld0: 29476 MB, 7486 cyl, 128 head, 63 sec, 512 bytes/sect x 60367872 sectors
 ld0: 4-bit width, bus clock 50.000 MHz
 sdmmc1: couldn't enable card: 60
 boot device: <unknown>
 root device: ld0
 dump device (default ld0b): 
 file system (default generic): 
 root on ld0a dumps on ld0b
 mountroot: trying nfs...
 mountroot: trying msdos...
 mountroot: trying ext2fs...
 mountroot: trying ffs...
 root file system type: ffs
 WARNING: no TOD clock present
 WARNING: using filesystem time
 WARNING: CHECK AND RESET THE DATE!
 init path (default /sbin/init): 
 init: copying out path `/sbin/init' 11
 Tue Nov  3 14:30:42 UTC 2015
 Starting root file system check:
 /dev/rld0a: file system is clean; not checking
 Growing ld0 disklabel (1111MB -> 29476MB)
 ld0a: error reading fsbn 128 of 128-143 (ld0 bn 385152; cn 188 tn 4 sn 0)
 resize_ffs: read failed: ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 Operation timed out
 Not resizing /: already correct size
 ld0a: error reading fsbn 77632 of 77632-77659 (ld0 bn 462656; cn 225 tn 58 sn 0)
 ld0a: error reading fsbn 74496 of 74496-74527 (ld0 bn 459520; cn 224 tn 24 sn 0)
 eval: mount: remote access failed
 ld0a: error reading fsbn 12160 of 12160-12191 (ld0 bn 397184; cn 193 tn 60 sn 0)
 eval: rm: remote access failed
 /etc/rc.d/root exited with code 1
 ld0a: error reading fsbn 19364 of 19364-19367 (ld0 bn 404388; cn 197 tn 29 sn 4)
 ld0a: error reading fsbn 77376 of 77376-77407 (ld0 bn 462400; cn 225 tn 50 sn 0)
 eval: swapctl: remote access failed
 Starting file system checks:
 ld0a: error reading fsbn 79776 of 79776-79807 (ld0 bn 464800; cn 226 tn 61 sn 0)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 fsck: exec /sbin/fsck_msdos for /dev/rld0e: ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0)
 Operation timed out
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 fsck: exec /usr/sbin/fsck_msdos for /dev/rld0e: ld0a: error reading fsbn 1435548 of 1435548-1435551 )
 No such file or directory
 Automatic file system check failed; help!
 ERROR: ABORTING BOOT (sending SIGTERM to parent)!
 [1]   Terminated              (stty status "^T...
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 ld0a: error reading fsbn 1777212 of 1777212-1777215 (ld0 bn 2162236; cn 1055 tn 49 sn 28)
 ld0a: error reading fsbn 12632 of 12632-12635 (ld0 bn 397656; cn 194 tn 10 sn 24)
 init: _getttyent: ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 )
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 Operation timed out
 ld0a: error reading fsbn 33824 of 33824-33855 (ld0 bn 418848; cn 204 tn 33 sn 0)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 ld0a: error reading fsbn 1435548 of 1435548-1435551 (ld0 bn 1820572; cn 888 tn 60 sn 28)
 ld0a: error reading fsbn 1414300 of 1414300-1414303 (ld0 bn 1799324; cn 878 tn 36 sn 28)
 ld0a: error reading fsbn 1777212 of 1777212-1777215 (ld0 bn 2162236; cn 1055 tn 49 sn 28)
 ld0a: error reading fsbn 1777212 of 1777212-1777215 (ld0 bn 2162236; cn 1055 tn 49 sn 28)
 ld0a: error reading fsbn 1777212 of 1777212-1777215 (ld0 bn 2162236; cn 1055 tn 49 sn 28)
 ld0a: error reading fsbn 1777212 of 1777212-1777215 (ld0 bn 2162236; cn 1055 tn 49 sn 28)
 
 U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
 reading args
 
 
 --Apple-Mail=_17E302E5-2383-40B0-A7ED-99C61B29A523
 Content-Transfer-Encoding: 7bit
 Content-Type: text/plain;
 	charset=us-ascii
 
 
 
 --Apple-Mail=_17E302E5-2383-40B0-A7ED-99C61B29A523--
Follow-Ups:
- Re: port-arm32/50288 (NetBSD-7.0_RC3/evbarm-earmv7hf/binary/gzimg/armv7.img doesn't boot on BBB)
  - From: Jared McNeill
Prev by Date: Re: port-arm32/50288 (NetBSD-7.0_RC3/evbarm-earmv7hf/binary/gzimg/armv7.img doesn't boot on BBB)
Next by Date: NetBSD Nightly Trouble Ticket Report
Previous by Thread: Re: port-arm32/50288 (NetBSD-7.0_RC3/evbarm-earmv7hf/binary/gzimg/armv7.img doesn't boot on BBB)
Next by Thread: Re: port-arm32/50288 (NetBSD-7.0_RC3/evbarm-earmv7hf/binary/gzimg/armv7.img doesn't boot on BBB)
Indexes:
Home | Main Index | Thread Index | Old Index