Re: kern/50085: Keyboard stops working after some X restarts

[Silas Silva <silasdb%gmail.com@localhost>]

On Sat, Jul 25, 2015 at 09:30:00AM +0000, Martin Husemann wrote:
>  Please provide the content of your /var/run/dmesg.boot file.


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_RC1 (GENERIC.201506190427Z)
total memory = 3581 MB
avail memory = 3506 MB
kern.module.path=/stand/i386/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0xfaaf0 000024 (v02 ACPIAM)
ACPI: XSDT 0xdfe60100 00005C (v01 081810 XSDT1136 20100818 MSFT 00000097)
ACPI: FACP 0xdfe60290 0000F4 (v03 081810 FACP1136 20100818 MSFT 00000097)
ACPI: DSDT 0xdfe604a0 00AEE0 (v01  A1577 A1577001 00000001 INTL 20060113)
ACPI: FACS 0xdfe78000 000040
ACPI: APIC 0xdfe60390 0000CC (v01 081810 APIC1136 20100818 MSFT 00000097)
ACPI: MCFG 0xdfe60460 00003C (v01 081810 OEMMCFG  20100818 MSFT 00000097)
ACPI: OEMB 0xdfe78040 000073 (v01 081810 OEMB1136 20100818 MSFT 00000097)
ACPI: HPET 0xdfe6b380 000038 (v01 081810 OEMHPET  20100818 MSFT 00000097)
ACPI: OSFR 0xdfe6b3c0 0000B0 (v01 081810 OEMOSFR  20100818 MSFT 00000097)
ACPI: SSDT 0xdfe798e0 000363 (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz, id 0x20652
cpu1 at mainbus0 apid 4: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz, id 0x20652
cpu2 at mainbus0 apid 1: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz, id 0x20652
cpu3 at mainbus0 apid 5: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz, id 0x20652
ioapic0 at mainbus0 apid 6: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <081810,XSDT1136,20100818>, AslId <MSFT,00000097>
ACPI BIOS Warning (bug): Incorrect checksum in table [OEMB] - 0xA4, should be 0x9F (20131218/tbprint-237)
ACPI: SSDT 0xdfe780c0 001340 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
ACPI: SSDT 0x0 001340 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
ACPI: SSDT 0xdfe79400 0004D5 (v01  PmRef  P001Cst 00003001 INTL 20060113)
ACPI: SSDT 0x0 0004D5 (v01  PmRef  P001Cst 00003001 INTL 20060113)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
IOH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COPR (PNP0C04) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
UAR1 (PNP0501) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
LPTE (PNP0400) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0040 (rev. 0x12)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x0041 (rev. 0x12)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x01d3 (rev. 0xa1)
vga0: WARNING: ignoring 64-bit BAR @ 0x14
vga0: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0x3b64 (miscellaneous communications, revision 0x06) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x06)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Realtek ALC887
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: DIG03 2ch: SPDIF Out [Built-In]
hdafg0: ADC04 2ch: Line In [Jack], Mic In [Jack]
hdafg0: ADC05 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x3b42 (rev. 0x06)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x3b4a (rev. 0x06)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 2
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address bc:ae:c5:53:7a:b0
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 4
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x06)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa6)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3b06 (rev. 0x06)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 2: Intel 3400 Serial ATA Controller (rev. 0x06)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 21 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x3b30 (rev. 0x06)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
piixide1 at pci0 dev 31 function 5: Intel 3400 Serial ATA Controller (rev. 0x06)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 21 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus3 at piixide1 channel 1
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  17 us, pow   500 mW
acpicpu0: P0: FFH, lat  10 us, pow 73000 mW, 3067 MHz
acpicpu0: P1: FFH, lat  10 us, pow 65000 mW, 2933 MHz
acpicpu0: P2: FFH, lat  10 us, pow 59000 mW, 2800 MHz
acpicpu0: P3: FFH, lat  10 us, pow 53000 mW, 2667 MHz
acpicpu0: P4: FFH, lat  10 us, pow 49000 mW, 2533 MHz
acpicpu0: P5: FFH, lat  10 us, pow 45000 mW, 2400 MHz
acpicpu0: P6: FFH, lat  10 us, pow 40000 mW, 2267 MHz
acpicpu0: P7: FFH, lat  10 us, pow 37000 mW, 2133 MHz
acpicpu0: P8: FFH, lat  10 us, pow 34000 mW, 2000 MHz
acpicpu0: P9: FFH, lat  10 us, pow 31000 mW, 1867 MHz
acpicpu0: P10: FFH, lat  10 us, pow 29000 mW, 1733 MHz
acpicpu0: P11: FFH, lat  10 us, pow 27000 mW, 1600 MHz
acpicpu0: P12: FFH, lat  10 us, pow 25000 mW, 1467 MHz
acpicpu0: P13: FFH, lat  10 us, pow 24000 mW, 1333 MHz
acpicpu0: P14: FFH, lat  10 us, pow 23000 mW, 1200 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3077477880 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
wd0 at atabus0 drive 0
wd0: <ST3500830SCE>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Unicomp Endura Keyboard, rev 1.10/2.15, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 0
uhidev1: Dell Dell USB Optical Mouse, rev 2.00/43.01, addr 4, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GH22NS50, K3ZAABD0957, TN03> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
aibs0: warning under limit on 'CHASSIS1 FAN Speed'
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

-- 
Silas Silva