NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
re: kern/49744: blank screen DL-360 radeon
On Mar 12, 10:55pm, mrg%eterna.com.au@localhost (matthew green) wrote:
-- Subject: re: kern/49744: blank screen DL-360 radeon
Putting the firmware file does not make a difference (still black on black):
drm: initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB).
drm: register mmio base: 0xf1cf0000
drm: register mmio size: 65536
radeon0: info: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M used)
radeon0: info: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
drm: Detected VRAM RAM=80M, BAR=128M
drm: RAM width 16bits DDR
Zone kernel: Available graphics memory: 17296072 kiB
Zone dma32: Available graphics memory: 2097152 kiB
drm: radeon: 64M of VRAM memory ready
drm: radeon: 512M of GTT memory ready.
drm: GART: num cpu pages 131072, num gpu pages 131072
drm: PCI GART of 512M enabled (table at 0x00000000460B2000).
radeon0: info: WB disabled
radeon0: info: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0x0xffff8003675bc000
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 23 (radeon)
drm: radeon: irq initialized.
drm: Loading R100 Microcode
drm: radeon: ring at 0x00000000C8001000
drm: ring test succeeded in 1 usecs
drm: ib test succeeded in 0 usecs
drm: No TV DAC info found in BIOS
drm: Radeon Display Connectors
drm: Connector 0:
drm: VGA-1
drm: DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
drm: Encoders:
drm: CRT1: INTERNAL_DAC1
drm: Connector 1:
drm: VGA-2
drm: DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
drm: Encoders:
drm: CRT2: INTERNAL_DAC2
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff8003679bd000, size 1024x768, depth 8, stride 1024
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
Home |
Main Index |
Thread Index |
Old Index