port-i386/49602: kernel panic with fpa on NetBSD-7.0_BETA i386

To: port-i386-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: port-i386/49602: kernel panic with fpa on NetBSD-7.0_BETA i386
From: h-masuda%ootani.nagata.kobe.jp@localhost
Date: Sun, 25 Jan 2015 01:20:00 +0000 (UTC)
>Number:         49602
>Category:       port-i386
>Synopsis:       kernel panic with fpa on NetBSD-7.0_BETA i386
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Jan 25 01:20:00 +0000 2015
>Originator:     Hideo Masuda
>Release:        NetBSD-7.0_BETA (GENERIC.201501241500Z)
>Organization:
>Environment:
NetBSD pe2600-1 7.0_BETA NetBSD 7.0_BETA (GENERIC.201501241500Z) i386

>Description:
Kernel panic during NetBSD-7.0_BETA 's kernel booting as following:

...
fpa0 at pci12 dev 0 function 0uvm_fault(0xc0e52b00, 0, 1) -> 0xe
fatal page fault in supervisor mode
trap type 6 code 0 eip c096f2e8 cs 8 eflags 10206 cr2 1c ilevel 8 esp c5547c60
curlwp 0xc0e0e440 pid 0 lid 1 lowest kstack 0xc0fcc2c0
kernel: supervisor trap page fault, code=0
Stopped in pid 0.1 (system) at  netbsd:strlcpy+0x1c:    movzbl ffffffff(%eax),%ebx
db{0}> 

I use "boot -c" and "disable fpa*" by useconf, successfully boot.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_BETA (GENERIC.201501241500Z)
total memory = 3967 MB
avail memory = 3887 MB
kern.module.path=/stand/i386/7.0/modules
timecounter: Timecounters tick every 10.000 msec
userconf: configure system autoconfiguration:
uc> disable fpa*
[326] fpa* disabled
uc> exit
Continuing...
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Computer Corporation PowerEdge 2600             
mainbus0 (root)
ACPI: RSDP 0xfdc20 000014 (v00 DELL  )
ACPI: RSDT 0xfdc34 000030 (v01 DELL   PE2600   00000001 MSFT 0100000A)
ACPI: FACP 0xfdc64 000074 (v01 DELL   PE2600   00000001 MSFT 0100000A)
ACPI: DSDT 0xf7fd0000 001FD0 (v01 DELL   PE2600   00000001 MSFT 0100000A)
ACPI: FACS 0xf7fdfc00 000040
ACPI: APIC 0xfdcd8 0000BE (v01 DELL   PE2600   00000001 MSFT 0100000A)
ACPI: SPCR 0xfdd96 000050 (v01 DELL   PE2600   00000001 MSFT 0100000A)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Xeon(TM) CPU 2.80GHz, id 0xf27
cpu1 at mainbus0 apid 6: Intel(R) Xeon(TM) CPU 2.80GHz, id 0xf27
cpu2 at mainbus0 apid 1: Intel(R) Xeon(TM) CPU 2.80GHz, id 0xf27
cpu3 at mainbus0 apid 7: Intel(R) Xeon(TM) CPU 2.80GHz, id 0xf27
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
ioapic1 at mainbus0 apid 9: pa 0xfec80000, version 0x20, 24 pins
ioapic2 at mainbus0 apid 10: pa 0xfec81000, version 0x20, 24 pins
ioapic3 at mainbus0 apid 11: pa 0xfec82000, version 0x20, 24 pins
ioapic4 at mainbus0 apid 12: pa 0xfec82800, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <DELL  ,PE2600  ,00000001>, AslId <MSFT,0100000a>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
FPU (PNP0C04) at acpi0 not configured
pcppi1 at acpi0 (SPK, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
FDC (PNP0700) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
PRT (PNP0401) at acpi0 not configured
MBIO (PNP0C01) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2540 (rev. 0x03)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2543 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vendor 0x8086 product 0x1461 (interrupt system, IO(x) APIC, revision 0x04) at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ahc1 at pci2 dev 2 function 0: Adaptec 3960D Ultra160 SCSI adapter
ahc1: interrupting at ioapic1 pin 0
ahc1: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci2 dev 2 function 1: Adaptec 3960D Ultra160 SCSI adapter
ahc2: interrupting at ioapic1 pin 1
ahc2: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
vendor 0x8086 product 0x1461 (interrupt system, IO(x) APIC, revision 0x04) at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
wm0 at pci3 dev 1 function 0: Intel i82544GC (LOM) 1000BASE-T Ethernet (rev. 0x02)
wm0: interrupting at ioapic1 pin 4
wm0: 64-bit 133MHz PCIX bus
wm0: 64 words (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:06:5b:xx:xx:xx
makphy0 at wm0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 3 function 0: vendor 0x8086 product 0x2545 (rev. 0x03)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vendor 0x8086 product 0x1461 (interrupt system, IO(x) APIC, revision 0x04) at pci4 dev 28 function 0 not configured
ppb4 at pci4 dev 29 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
ppb5 at pci5 dev 4 function 0: vendor 0x1014 product 0x01a7 (rev. 0x02)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
wm1 at pci6 dev 4 function 0: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm1: interrupting at ioapic2 pin 0
wm1: 64-bit 120MHz PCIX bus
wm1: 256 words (8 address bits) MicroWire EEPROM
wm1: Ethernet address 00:04:23:xx:xx:xx
makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm2 at pci6 dev 4 function 1: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm2: interrupting at ioapic2 pin 1
wm2: 64-bit 120MHz PCIX bus
wm2: 256 words (8 address bits) MicroWire EEPROM
wm2: Ethernet address 00:04:23:xx:xx:xx
makphy2 at wm2 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm3 at pci6 dev 6 function 0: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm3: interrupting at ioapic2 pin 2
wm3: 64-bit 120MHz PCIX bus
wm3: 256 words (8 address bits) MicroWire EEPROM
wm3: Ethernet address 00:04:23:xx:xx:xx
makphy3 at wm3 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm4 at pci6 dev 6 function 1: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm4: interrupting at ioapic2 pin 3
wm4: 64-bit 120MHz PCIX bus
wm4: 256 words (8 address bits) MicroWire EEPROM
wm4: Ethernet address 00:04:23:xx:xx:xx
makphy4 at wm4 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb6 at pci5 dev 5 function 0: vendor 0x1014 product 0x01a7 (rev. 0x02)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled
wm5 at pci7 dev 4 function 0: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm5: interrupting at ioapic2 pin 4
wm5: 64-bit 120MHz PCIX bus
wm5: 256 words (8 address bits) MicroWire EEPROM
wm5: Ethernet address 00:04:23:xx:xx:xx
makphy5 at wm5 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm6 at pci7 dev 4 function 1: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm6: interrupting at ioapic2 pin 5
wm6: 64-bit 120MHz PCIX bus
wm6: 256 words (8 address bits) MicroWire EEPROM
wm6: Ethernet address 00:04:23:xx:xx:xx
makphy6 at wm6 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm7 at pci7 dev 6 function 0: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm7: interrupting at ioapic2 pin 6
wm7: 64-bit 120MHz PCIX bus
wm7: 256 words (8 address bits) MicroWire EEPROM
wm7: Ethernet address 00:04:23:xx:xx:xx
makphy7 at wm7 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm8 at pci7 dev 6 function 1: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm8: interrupting at ioapic2 pin 7
wm8: 64-bit 120MHz PCIX bus
wm8: 256 words (8 address bits) MicroWire EEPROM
wm8: Ethernet address 00:04:23:xx:xx:xx
makphy8 at wm8 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy8: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vendor 0x8086 product 0x1461 (interrupt system, IO(x) APIC, revision 0x04) at pci4 dev 30 function 0 not configured
ppb7 at pci4 dev 31 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled
wm9 at pci8 dev 3 function 0: Intel i82543GC 1000BASE-X Ethernet (rev. 0x02)
wm9: interrupting at ioapic2 pin 8
wm9: 64-bit 66MHz PCI bus
wm9: 64 words (6 address bits) MicroWire EEPROM
wm9: Ethernet address 00:03:47:xx:xx:xx
wm9: 1000baseSX, 1000baseSX-FDX, auto
ppb8 at pci0 dev 4 function 0: vendor 0x8086 product 0x2547 (rev. 0x03)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled
vendor 0x8086 product 0x1461 (interrupt system, IO(x) APIC, revision 0x04) at pci9 dev 28 function 0 not configured
ppb9 at pci9 dev 29 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled
amr0 at pci10 dev 8 function 0: AMI RAID <PERC 4/Di>
amr0: interrupting at ioapic3 pin 0
amr0: firmware 252D, BIOS 1.07, 128MB RAM
ld0 at amr0 unit 0: RAID 1, optimal
ld0: 34678 MB, 8807 cyl, 128 head, 63 sec, 512 bytes/sect x 71020544 sectors
ld1 at amr0 unit 1: RAID 5, optimal
ld1: 69356 MB, 8841 cyl, 255 head, 63 sec, 512 bytes/sect x 142041088 sectors
vendor 0x8086 product 0x1461 (interrupt system, IO(x) APIC, revision 0x04) at pci9 dev 30 function 0 not configured
ppb10 at pci9 dev 31 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci11 at ppb10 bus 12
pci11: i/o space, memory space enabled
isp0 at pci11 dev 6 function 0: QLogic FC-AL and 2Gbps Fabric HBA
isp0: interrupting at ioapic4 pin 0
vendor 0x8086 product 0x1a48 (ethernet network, revision 0x02) at pci11 dev 7 function 0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2482 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
ppb11 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x42)
pci12 at ppb11 bus 13
pci12: i/o space, memory space enabled
vendor 0x1011 product 0x000f (FDDI network, revision 0x01) at pci12 dev 0 function 0 not configured
vga1 at pci12 dev 4 function 0: vendor 0x1002 product 0x4752 (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
mach64drm0 at vga1: Rage XL
mach64drm0: Initialized mach64 2.0.0 20060718
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2480 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: can't map general purpose i/o space(rv = 1)
fwhrng0 at ichlpcib0: Intel Firmware Hub Random Number Generator
piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2 at isp0: 512 targets, 8 luns per target
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
scsibus2: waiting 2 seconds for devices to settle...
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
st0 at scsibus0 target 6 lun 0: <QUANTUM, SDLT320, 3131> tape removable
st0 : drive empty
st0: sync (25.00ns offset 62), 16-bit (80.000MB/s) transfers
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-ROM GDR8081N, , 0208> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated


At NetBSD-6.1_STABLE, successfully boot and device usable as following:
(Note: dge0 local patch applied)

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1_STABLE (GENERIC) #2: Fri Jun 13 08:03:22 JST 2014
        admin@pe2600-1:/export/work/netbsd-6/src/sys/arch/i386/compile/GENERIC
total memory = 3967 MB
avail memory = 3889 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Computer Corporation PowerEdge 2600             
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Xeon(TM) CPU 2.80GHz, id 0xf27
cpu1 at mainbus0 apid 6: Intel(R) Xeon(TM) CPU 2.80GHz, id 0xf27
cpu2 at mainbus0 apid 1: Intel(R) Xeon(TM) CPU 2.80GHz, id 0xf27
cpu3 at mainbus0 apid 7: Intel(R) Xeon(TM) CPU 2.80GHz, id 0xf27
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 9: pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0 apid 10: pa 0xfec81000, version 20, 24 pins
ioapic3 at mainbus0 apid 11: pa 0xfec82000, version 20, 24 pins
ioapic4 at mainbus0 apid 12: pa 0xfec82800, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <DELL  ,PE2600  ,00000001>, AslId <MSFT,0100000a>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
npx1 at acpi0 (FPU, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPK, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
FDC (PNP0700) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
PRT (PNP0401) at acpi0 not configured
MBIO (PNP0C01) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2540 (rev. 0x03)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2543 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vendor 0x8086 product 0x1461 (interrupt system, interface 0x20, revision 0x04) at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ahc1 at pci2 dev 2 function 0: Adaptec 3960D Ultra160 SCSI adapter
ahc1: interrupting at ioapic1 pin 0
ahc1: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci2 dev 2 function 1: Adaptec 3960D Ultra160 SCSI adapter
ahc2: interrupting at ioapic1 pin 1
ahc2: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
vendor 0x8086 product 0x1461 (interrupt system, interface 0x20, revision 0x04) at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
wm0 at pci3 dev 1 function 0: Intel i82544GC (LOM) 1000BASE-T Ethernet (rev. 0x02)
wm0: interrupting at ioapic1 pin 4
wm0: 64-bit 133MHz PCIX bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:06:5b:xx:xx:xx
makphy0 at wm0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 3 function 0: vendor 0x8086 product 0x2545 (rev. 0x03)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vendor 0x8086 product 0x1461 (interrupt system, interface 0x20, revision 0x04) at pci4 dev 28 function 0 not configured
ppb4 at pci4 dev 29 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
ppb5 at pci5 dev 4 function 0: vendor 0x1014 product 0x01a7 (rev. 0x02)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
wm1 at pci6 dev 4 function 0: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm1: interrupting at ioapic2 pin 0
wm1: 64-bit 120MHz PCIX bus
wm1: 256 word (8 address bits) MicroWire EEPROM
wm1: Ethernet address 00:04:23:xx:xx:xx
makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm2 at pci6 dev 4 function 1: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm2: interrupting at ioapic2 pin 1
wm2: 64-bit 120MHz PCIX bus
wm2: 256 word (8 address bits) MicroWire EEPROM
wm2: Ethernet address 00:04:23:x:xx:xx
makphy2 at wm2 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm3 at pci6 dev 6 function 0: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm3: interrupting at ioapic2 pin 2
wm3: 64-bit 120MHz PCIX bus
wm3: 256 word (8 address bits) MicroWire EEPROM
wm3: Ethernet address 00:04:23:xx:xx:xx
makphy3 at wm3 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm4 at pci6 dev 6 function 1: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm4: interrupting at ioapic2 pin 3
wm4: 64-bit 120MHz PCIX bus
wm4: 256 word (8 address bits) MicroWire EEPROM
wm4: Ethernet address 00:04:23:xx:xx:xx
makphy4 at wm4 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb6 at pci5 dev 5 function 0: vendor 0x1014 product 0x01a7 (rev. 0x02)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled
wm5 at pci7 dev 4 function 0: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm5: interrupting at ioapic2 pin 4
wm5: 64-bit 120MHz PCIX bus
wm5: 256 word (8 address bits) MicroWire EEPROM
wm5: Ethernet address 00:04:23:xx:xx:xx
makphy5 at wm5 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm6 at pci7 dev 4 function 1: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm6: interrupting at ioapic2 pin 5
wm6: 64-bit 120MHz PCIX bus
wm6: 256 word (8 address bits) MicroWire EEPROM
wm6: Ethernet address 00:04:23:xx:xx:xx
makphy6 at wm6 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm7 at pci7 dev 6 function 0: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm7: interrupting at ioapic2 pin 6
wm7: 64-bit 120MHz PCIX bus
wm7: 256 word (8 address bits) MicroWire EEPROM
wm7: Ethernet address 00:04:23:xx:xx:xx
makphy7 at wm7 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm8 at pci7 dev 6 function 1: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
wm8: interrupting at ioapic2 pin 7
wm8: 64-bit 120MHz PCIX bus
wm8: 256 word (8 address bits) MicroWire EEPROM
wm8: Ethernet address 00:04:23:xx:xx:xx
makphy8 at wm8 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy8: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vendor 0x8086 product 0x1461 (interrupt system, interface 0x20, revision 0x04) at pci4 dev 30 function 0 not configured
ppb7 at pci4 dev 31 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled
wm9 at pci8 dev 3 function 0: Intel i82543GC 1000BASE-X Ethernet (rev. 0x02)
wm9: interrupting at ioapic2 pin 8
wm9: 64-bit 66MHz PCI bus
wm9: 64 word (6 address bits) MicroWire EEPROM
wm9: Ethernet address 00:03:47:xx:xx:xx
wm9: 1000baseSX, 1000baseSX-FDX, auto
ppb8 at pci0 dev 4 function 0: vendor 0x8086 product 0x2547 (rev. 0x03)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled
vendor 0x8086 product 0x1461 (interrupt system, interface 0x20, revision 0x04) at pci9 dev 28 function 0 not configured
ppb9 at pci9 dev 29 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled
amr0 at pci10 dev 8 function 0: AMI RAID <PERC 4/Di>
amr0: interrupting at ioapic3 pin 0
amr0: firmware 252D, BIOS 1.07, 128MB RAM
ld0 at amr0 unit 0: RAID 1, optimal
ld0: 34678 MB, 8807 cyl, 128 head, 63 sec, 512 bytes/sect x 71020544 sectors
ld1 at amr0 unit 1: RAID 5, optimal
ld1: 69356 MB, 8841 cyl, 255 head, 63 sec, 512 bytes/sect x 142041088 sectors
vendor 0x8086 product 0x1461 (interrupt system, interface 0x20, revision 0x04) at pci9 dev 30 function 0 not configured
ppb10 at pci9 dev 31 function 0: vendor 0x8086 product 0x1460 (rev. 0x04)
pci11 at ppb10 bus 12
pci11: i/o space, memory space enabled
isp0 at pci11 dev 6 function 0: QLogic FC-AL and 2Gbps Fabric HBA
isp0: interrupting at ioapic4 pin 0
dge0 at pci11 dev 7 function 0: Intel i82597EX 10GbE-SR Ethernet (rev. 0x02)
dge0: interrupting at ioapic4 pin 4
dge0: 64-bit 66MHz PCIX bus
dge0: Ethernet address 00:0e:0c:xx:xx:xx
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2482 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
ppb11 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x42)
pci12 at ppb11 bus 13
pci12: i/o space, memory space enabled
fpa0 at pci12 dev 0 function 0: DEC DEFPA PCI FDDI SAS Controller
fpa0: FDDI address 00:00:f8:xx:xx:xx, FW=3.10, HW=0, SMT V7.2
fpa0: FDDI Port = S (PMD = Unshielded Twisted Pair)
fpa0: interrupting at ioapic0 pin 16
vga1 at pci12 dev 4 function 0: vendor 0x1002 product 0x4752 (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
mach64drm0 at vga1: Rage XL
mach64drm0: Initialized mach64 2.0.0 20060718
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2480 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpio0 at ichlpcib0: 64 pins
fwhrng0 at ichlpcib0: Intel Firmware Hub Random Number Generator
piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2 at isp0: 512 targets, 8 luns per target
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
scsibus2: waiting 2 seconds for devices to settle...
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
st0 at scsibus0 target 6 lun 0: <QUANTUM, SDLT320, 3131> tape removable
st0 : drive empty
st0: sync (25.00ns offset 62), 16-bit (80.000MB/s) transfers
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-ROM GDR8081N, , 0208> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
>How-To-Repeat:
boot netbsd-7.0_BETA.GENERIC kernel with fpa device.

>Fix:
unknown.
Prev by Date: Re: port-sh3/49597: swapcontext(3) stack pointer problem on NetBSD/sh3
Next by Date: PR/49602 CVS commit: src/sys/dev/pci
Previous by Thread: PR/49597 CVS commit: src/lib/libc/arch/sh3/gen
Next by Thread: Re: port-i386/49602: kernel panic with fpa on NetBSD-7.0_BETA i386
Indexes:
Home | Main Index | Thread Index | Old Index