NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
PR/48451 CVS commit: [netbsd-6] src/sys/dev
The following reply was made to PR port-amd64/48451; it has been noted by GNATS.
From: "Martin Husemann" <martin%netbsd.org@localhost>
To: gnats-bugs%gnats.NetBSD.org@localhost
Cc:
Subject: PR/48451 CVS commit: [netbsd-6] src/sys/dev
Date: Sun, 7 Dec 2014 16:39:56 +0000
Module Name: src
Committed By: martin
Date: Sun Dec 7 16:39:55 UTC 2014
Modified Files:
src/sys/dev/mii [netbsd-6]: brgphy.c brgphyreg.h
src/sys/dev/pci [netbsd-6]: if_bge.c if_bgereg.h if_bnx.c if_bnxreg.h
if_bnxvar.h
Log Message:
Pull up the following, requested by msaitoh in #1207:
sys/dev/mii/brgphy.c 1.69, 1.71-1.76 via patch
sys/dev/mii/brgphyreg.h 1.6-1.7, 1.9
sys/dev/pci/if_bge.c 1.259,1.267-1.276 via patch
sys/dev/pci/if_bgereg.h 1.87-1.88
sys/dev/pci/if_bnx.c 1.48, 1.49, 1.52-1.57 via patch
sys/dev/pci/if_bnxreg.h 1.15-1.18
sys/dev/pci/if_bnxvar.h 1.4-1.6
Changes for bge(4), bnx(4) and brgphy(4):
- Add device IDs for Broadcom BCM57710, BCM57711(E), BCM57712(E) and
BCM5719 into pcidevs.
- Change BCM5720's device ID from 0x1658 to 0x165f. 0x1658 is only for
the pre-product and not released to public.
- Fix detection of BGEPHYF_FIBER_{MII|TBI}
- Fix typo in comment.
- KNF
- brgphy(4):
- Add BCM5708S support.
- Add 2500SX support.
- Fix bit definition of BRGPHY_MRBE_MSG_PG5_NP_T2 from FreeBSD.
- Remove extra delay in brgphy_mii_phy_auto. Same as {Free,Open}BSD.
- Fix media detect on some Fiber chips.
- Add BCM5706.
- bge(4):
- Print yet another hardware config word in SRAM(BGE_SRAM_DATA_CFG_5)
for BCM5717 and newer devices.
- Fix a trivial bug in #ifdef NOTYET.
- Add BGEPHYF_NO_WIRESPEED flag for fiber devices.
- Print APE firmware correctly.
- Don't use the PHY Auto Poll Mode on many chips. This fixes a bug
that MII Fiber NIC drop packets about 50%. Same as {Free,Open}BSD.
Tested on HP Moonshot.
- Add workaround for PR#48451. Some BCM5717-5720 based systems get
NMI on boot. This problem doesn't occur when we don't use
prefetchable memory in the APE area. I don't know the reason...
Tested with HP MicroServer Gen8.
- Fix a bug that bge can't be initialized correctly on some sparc64
systems (PR#49018).
- Change initializaton order as the same as the document, Linux tg3
and FreeBSD (part of r241436).
- In the BCM5703, the DMA read watermark should be set to less than
or equal to the maximum memory read byte count of the PCI-X command
register. Same as FreeBSD r204978 and Linux tg3 driver.
- bnx(4):
- Enclose #ifdef BNX_DEBUG correctly.
- Add 2500SX support.
- Print some information (ASCI revision, PCI status, etc).
From FreeBSD.
To generate a diff of this commit:
cvs rdiff -u -r1.59.8.6 -r1.59.8.7 src/sys/dev/mii/brgphy.c
cvs rdiff -u -r1.5.14.1 -r1.5.14.2 src/sys/dev/mii/brgphyreg.h
cvs rdiff -u -r1.200.2.3 -r1.200.2.4 src/sys/dev/pci/if_bge.c
cvs rdiff -u -r1.56.18.3 -r1.56.18.4 src/sys/dev/pci/if_bgereg.h
cvs rdiff -u -r1.45.8.1 -r1.45.8.2 src/sys/dev/pci/if_bnx.c
cvs rdiff -u -r1.14 -r1.14.10.1 src/sys/dev/pci/if_bnxreg.h
cvs rdiff -u -r1.2.8.1 -r1.2.8.2 src/sys/dev/pci/if_bnxvar.h
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Home |
Main Index |
Thread Index |
Old Index