Re: bin/48140 (dhcpcd fails to get lease in -cur rent)

[Justin Cormack <justin%specialbusservice.com@localhost>]

The following reply was made to PR bin/48140; it has been noted by GNATS.

From: Justin Cormack <justin%specialbusservice.com@localhost>
To: "roy%marples.name@localhost" <roy%marples.name@localhost>
Cc: gnats-bugs%netbsd.org@localhost, roy%netbsd.org@localhost, gnats-admin%netbsd.org@localhost, 
	netbsd-bugs%netbsd.org@localhost, Andreas Gustafsson <gson%gson.org@localhost>
Subject: Re: bin/48140 (dhcpcd fails to get lease in -cur rent)
Date: Sun, 19 Oct 2014 23:11:48 +0100

 On Sun, Oct 19, 2014 at 11:22 AM, roy%marples.name@localhost <roy%marples.name@localhost> wrote:
 > Is the dhcpcd version the same in the installer as after install? Can you
 > say how the installer one failed?
 
 ok so they arent the same, the installer is
 dhcpcd 6.5.1
 Copyright (c) 2006-2014 Roy Marples
 while installed is
 isc-dhcpd-4.3.0
 
 (why?)
 
 During install it is getting an ipv6 address fine (if only
 nyftp.org.uk had ipv6 I would never have noticed lack of ipv4), which
 alas means the messages scroll a bit fast but seem to be:
 
 (the lack of printf on the installer may not be helping the messages).
 
 xennet0: executing `/libexec/dhcpcd-run-hooks' PREINIT
 printf: not found
 xennet0: executing `/libexec/dhcpcd-run-hooks' CARRIER
 printf: not found
 DUID 00:01:00:01:1b:XXXXXXXXXXXXXXXXXXX
 xennet0: IAID 31:52:23:e4
 xennet0: delaying IPv6 router solictation for 0.4 seconds
 xennet0: delaying IPv4 for 0.8 seconds
 xennet0: soliciting an IPv6 router
 xennet0: sending Router Solicitation
 dhcp_openudp: m (Can't assign requested address)
 xennet0: Router Advertisement from fe80::c001:88ff:fea9:e1f5
 xennet0: adding address 2a01:XXXXXXXXXXXXXXXXXXX/64
 xennet0: vltime 86400 seconds, pltime 14400 seconds
 xennet0: adding route to 2a01:XXXXXXXX/64
 xennet0: adding default route via fe80::c001:88ff:fea9:e1f5
 xennet0: executing `/libexec/dhcpcd-run-hooks' ROUTERADVERT
 printf: not found
 xennet0: No DHCPv6 instruction in RA
 
 
 xennet0: delaying IPv4 for 1.0 seconds
 xennet0: soliciting an IPv6 router
 xennet0: sending Router Solicitation
 dhcp_openudp: m (Can't assign requested address)
 xennet0: Router Advertisement from fe80::c001:88ff:fea9:e1f5
 xennet0: adding address 2a01:XXXXXXXXXXXXXXXXXXXXX/64
 xennet0: vltime 86400 seconds, pltime 14400 seconds
 xennet0: adding route to 2a01:XXXXXXXXXXX:/64
 xennet0: adding default route via fe80::c001:88ff:fea9:e1f5
 xennet0: waiting for Router Advertisement DAD to complete
 xennet0: No DHCPv6 instruction in RA
 xennet0: Router Advertisement DAD completed
 xennet0: executing `/libexec/dhcpcd-run-hooks' ROUTERADVERT
 printf: not found
 xennet0: Router Advertisement from fe80::c001:88ff:fea9:e1f5
 xennet0: adding address 2a01:XXXXXXXXXXXXXXXXX/64
 xennet0: vltime 86400 seconds, pltime 14400 seconds
 xennet0: executing `/libexec/dhcpcd-run-hooks' ROUTERADVERT
 printf: not found